• Annual Conference on Human and Language Technology
• /
• 2018.10a
• /
• pp.228-233
• /
• 2018

세벌식 한글 글쇠배열은 두벌식보다 글쇠 수가 많이 필요하다는 단점이 있으나, 자음의 종류를 구분할 필요가 없고 고속 타자에 구조적으로 더 유리하다는 장점도 있다. 통상적인 '이어치기'를 넘어 일명 '모아치기'와 '동시치기'처럼 컴퓨터 속기에서 쓰이는 원리를 반영한 입력 로직을 구현할 수 있는데, 이를 위해서는 전용 오토마타를 설계해야 하며 글쇠가 순서대로 눌러진 것뿐만 아니라 각 글쇠들이 눌러진 간격, 눌러졌다가 떼어진 시점, 둘 이상의 글쇠가 동시에 눌러지는 상황에 대해서 고려할 필요가 있다. 본 연구에서는 글쇠가 눌린 간격의 변화를 주로 이용하여 세벌식 기반의 입력 방식에 적용 가능한 동시치기 로직을 제안하였다. 그리고 이것이 오타를 자동 보정함으로써 타자의 편의를 실제로 개선할 수 있음을 공병우 세벌식 글쇠배열을 기준으로 한 실험을 통해 제시하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.4
• /
• pp.167-172
• /
• 1982

We have studied and discussed the error rate performance of Quadrature Amplitude Modulation(QAM) in an environment of cochannel QAM interference and impulsive noise. A general equation of error probability for L-level QAM signal has been derived and the error rate of the 16-QAM signal, as an example, has been calculated as functions of carrier-to-noise power ratio(CNR), carrier-to-interferer power ratio(CIR), impulsive indes, and the phase difference between signal and interferer.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.637-642
• /
• 2003

The Modified 9Cr-1Mo steel identified as T91, P91 and F91 in the ASME specification has been widely used for the construction of modern power plants. The available data on the influence of process parameters during manufacturing and fabrication on its properties are not sufficient. In this study, the influence of various thermal cycles on the hardness and the creep rupture strength was analyzed in the base metal and the weldments made in tube and pipe of a Mod.9Cr-1Mo steel. The low hardness, 155Hv, showed low creep rupture strength below the allowable stresses of T91 base metal in the ASME specification. This low value was attributed to the fully recovered dislocation structure and the weakening of precipitation hardening associated with the abnormal thermal cycles.

• Archives of Reconstructive Microsurgery
• /
• v.12 no.2
• /
• pp.105-111
• /
• 2003

It has been known that the vessels of the finger tip are very small and have many branches, so the anastomosis of this vessel is very difficult. But when this operation achieves success, the replanted finger tip provides adequate soft tissue, restoration of the length, sensory and nail. The authors describe the result of finger tip replantation in 94 patients, 103 finger tips, from October 1999 to June 2002. We performed the salvage procedure in all cases. The success rate of finger tip replantation was 74.8%. We achieved higher success rate, when we succeeded anastomosis of the central artery. The function of the replanted fingers was good. The average TAM was 80% and patient satisfaction was high. We be live that we can achieve higher success rate by anastomosing central artery and performing delicate salvage procedure.

• Journal of the Korean Society of Visualization
• /
• v.14 no.2
• /
• pp.25-30
• /
• 2016

The wafer temperature and its uniformity inside the LPCVD chamber were analyzed. The temperature uniformity at the end of the wafer load depends on the heat-insulating cap. The finite difference method was used to investigate the radiation and conduction heat transfer mechanisms, and the temperature field and heat diffusion in the LPCVD chamber was visualized. It was found that the temperature uniformity of the wafers could be controlled by the size and distance of the heat-insulating cap.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.653-661
• /
• 2009

In order to reduce the noise and oscillation, it is consider a matter in all aspects about the noise stem from accumulator and the characteristic of transmission, Transformation of outside shape has change of noise occurrence at transmission process. Therefore, performed sound numerical analysis and conducted an experiment to examine the birthplace of accumulator's external shape change. In a sound numerical analysis, we can fond out transmission loss between inlet and outlet's sound pressure. In an experiment, we can make out transmission loss by sound wave separation theory through drawing sound pressure inlet and outlet.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.90-96
• /
• 2009

The loading condition of actual construction works is complex. The shear effect of mixed-mode load component are crack propagation mechanism in step larger than the crack initial mechanism. Therefore, in this study received a mixed-mode loading on fatigue crack stress ratio on crack propagation path and speed of progress to learn whether stress affects crack propagation. ${\Delta}$ P a constant state of fatigue tests in Mode I, II give the same stress ratio, frequency 10Hz, sinusoidal waveform was used. A lower stress ratio fatigue crack propagation angle is small. This is less affected by the Mode II. Therefore, a mixed-mode fatigue crack propagation is to progress by the Mode. Stress ratio in a mixed mode crack in the path of progress and found a lot of impact.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.380-380
• /
• 2011

본 연구는 경인 아라뱃길의 운영을 위한 기초자료로써 굴포천 유역에서 분포형 강우 모형을 적용하기 위한 것으로 HEC-HMS의 ModClark 방법을 사용하였다. HEC-HMS에서 사용가능한 강우유출모형 중 ModClark 방법은 격자기반의 공간적 강우 분포 모형으로 본 연구에서는 그 기초 지형격자 자료를 10m DEM을 이용해 ArcGIS에서의 작업을 통해 추출하였다. HEC-HMS에 입력 가능한 격자기반 지형자료를 얻기 위해서 미 공병단에서 배포하는 GIS tool 인 HEC-GeoHMS를 이용하였다. 또한 강우자료는 한국수자원공사의 3km*3km 격자기반의 K-PPM 자료를 사용하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2017.05a
• /
• pp.345-346
• /
• 2017

종이책은 출판의 오랜 역사적, 기술적 과정을 통해 고유한 사용자 인터페이스를 형성해왔다. 전자책은 1970년대 이후 디지털 출판 방식에 의해 출현하고 최근 HTML5 기반의 이퍼브(EPUB)3.0 형식이 확산되었다. 전자책은 전통적 종이책 편집의 사용자 인터페이스 요소들을 상당부분 지니고 있으면서도 많은 부분을 포함하지 못하고 있다. 본 연구는 기술와 미디어 변화에 따라 '사용자가 인터페이스를 통해 상호작용을 하면서 가지게 되는 전체적인 느낌과 경험이 변화된다는 관점에서 종이책과 전자책의 인터페이스를 비교 분석한다. 이 작업을 통하여 공통점과 차이점이 지니는 의미를 분석하고, 전통적 출판의 편집요소가 어떻게 전자책 편집 수준을 높이고 전자책을 통해 더 진화된 인터페이스와 사용자 체험을 제공할 수 있게 활용될 수 있는지를 연구한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.687-692
• /
• 2011

Experimental analysis has been carried out on noise reduction of subsonic jet flow with chevron nozzle to investigate relationships between geometry variation of chevron nozzles and jet noise reduction. Including base nozzle, seven nozzles are tested at Mach number 0.9. Parametric variables are chevron count, chevron length, and chevron shape. From these experiment, the more chevron count increase, the more jet noise reduction gain. Varying the chevron length, short chevron nozzle increase the jet noise at certain direction all the more. Chevron shape is also considered as important factor to reduce the jet noise.