• Journal of the Korea Convergence Society
• /
• v.8 no.2
• /
• pp.113-120
• /
• 2017

The purpose of this present study was to evaluate the surface radiation dose reduction and radiograph artifact images in computed tomography (CT) for the manufactured radiation shields by using sea-shells. The radiation convergence shields were made from silicons, sea-shells, barium powders, producted circle types of diameter 50 mm, thickness 3.5 mm for 5 kinds (only silicon shield, only barium shield, mixed sea-shells with silicon shield, mixed barium with silicon shield, mixed sea-shells with barium and silicon shield). Radiation generation and acquisition were used 4-channel multi-detector CT. The results of this study showed that mixed sea-shells with silicon shields could reduce the surface dose of 5.3% without radiograph artifact images. In the future, we will expect the radiation convergence shield as environmentally friendly materials by using the recycling of sea-shells with the advantages of silicon which can make various shapes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.358-394
• /
• 1995

The author studied the actual conditions on the production of dental prosthesis made in laboratories, and also studied interrelationships between dentists and laboratory technicians in both personal and technical aspects. Two hundred-eighty four technicians, work in dental laboratories presently, were surveyed via mail and direct contact during the period from June 1 to June 30 and August 27 to August 28 in 1994 respectively. The obtained results were as follows : 1. Among the respondents, 90.5% we re working in commercial dental laboratories and their laboratories were mainly located in the Seoul area(40.9%, P<0.05). The numbers of employees in these laboratories were less than 10 persons(70.0%, P<0.01), and 75.9% of these laboratories have been in operation less than 15 years. 2. Most laboratory procedures were accomplished according to established disciplines. However, procedures such as die trimming in fixed restorations and the qualifications of the people designing removable partial dentures were not. Other problem areas were boxing of the working cast, the person determining the posterior palatal seal area, selection and arrangement of artificial teeth, occlusion rim correction and laboratory remounting of the processed denture in complete denture restorations. 3. Only half of the requesting dentists could send work authorizations to the laboratories with their work and even so, its contents were quite lacking. Consequently, there must be some standards in writing work authorization. 4. Technicians most desired clean and accurate impressions in fixed and removable dentures, and enough tooth reduction in porcelain fused to metal restorations. 5. For the establishment of better relationships between dentist and dental technician, the respondents desired the establishment of equal footing first(33.5%), and frequent conversations and muture understanding second(25.9%).

• Journal of the Korean Society of Radiology
• /
• v.9 no.4
• /
• pp.213-217
• /
• 2015

To report problems found in a patient who has implemented stent implantation and then conducted a perfusion MRI using ASL(Arterial Spin Labeling), in order to suggest a solution to them. The perfusion MRI was conducted, using pCASL among ASL methods. Data from pCASL(Pseudo Continuous Arterial Spin Labeling) was acquired together with the structural image simply by changing position(labeling gap 15 mm, 170 mm) of the labeling pulse to avoid stent. Data was processed through the ASLtbx. When perfusion MRI was acquired using pCASL, it showed that the position of the conventional labeling pulse (labeling gap 24 mm) was overlapped with that of stent, which made signal intensity in right brain tissue appear as if it were void. When the labeling pulse was positioned (labeling gap 15 mm) to avoid stent, high signal intensity images were acquired. In labeling pulse (labeling gap 170 mm), the signal intensity was more reduced due to relaxation before labeled blood arrived at the imaging slice. pCASL can be stably repeated measurements because it does not use a contrast agent. And it should be selected with the appropriate image acquisition parameters for the high quality image.

• Journal of architectural history
• /
• v.16 no.4
• /
• pp.7-22
• /
• 2007

In San Francisco, two new museums were recently built in 1995 and 2005. The one is San Francisco Museum of Modern Art designed by Mario Botta and the other is De Young Museum designed by Jacques Herzog & Pierre de Meuron. The urban settings for the museums are compared with each other and theories of the architects are evolved on different branches in the modernist trends. The theories and settings are followed by the representation in the forms, facades, interior spaces and towers. SFMOMA is located on the SoMa area, which was recently developed into a cultural urban core with Moscone Center and Buena Yerba Garden. De Young Museum was rebuilt in the old museum site in the Golden Gate Park. The one is on the context of urban artefacts and the other on the context of natural artefacts. To Botta, the museum in today's city plays a role analogous to that of the cathedral of yesterday. It is a place of common encounter and confrontation. The volume of SFMOMA which is geometrical and symmetric with double pylons. The frontality on the street and public green open space and the axiality of SFMOMA runs through the Buena Yerba Garden over Buena Yerba Center for the Arts are reminded us of an urban core with a religious monument and a city square. The staircase with grandiose design in the atrium seems to work as an altar with lighting from skylight above enhancing the liturgical ambiance. De Young Museum is shaped in a rectangle with long narrow courtyards. Three bands of volumes are juxtaposed and the nature flows into the museum corridors and galleries. The tower is distorted so as to be aligned to the street grids of the surrounding area. The copper panel of De Young Museum and natural context evoke modern concept of "machine in the garden". The two museums from different pedigrees of Modern Architecture are now major landmarks of SF and urban expressions for the 21st century.

• Journal of the Korean Society of Radiology
• /
• v.5 no.2
• /
• pp.59-66
• /
• 2011

There is a difficulty because of classifying the anatomical structure in the neck CT scan by the beam hardening artifact no more than disease and it including the 6, 7 number cervical spine and intervertebral disk. In case of enforcing the neck CT scan cause of the inner diameter of beam artifact tried to be inquired by the image evaluation according to the change of the image evaluation according to the direction of the shoulder joint applying the variation method of a posture and location and Kernel value and it was most appropriate, the lion tax and Kernel value try to be searched for through an experiment. Somatom Sensation 16 (Siemens, Enlarge, Germany) equipment was used in a patient 30 people coming to the hospital for the neck CT scan. A workstation used the AW 4.4 version (GE, USA). According to a direction and location of the shoulder joint, the patient posture gave a change to the direction of the shoulder joint as the group S it gave a change as three postures and placed the both arms comfortably and helps a group N and augmented unipolar left in the wealthy merchant and group P it memorized the both hands and ordered the eversion and drops below to the utmost and enforced a scan. By using a reconstructing method as the second opinion, it gave and reconstructed the Kernel value a change based on scan data with B 10 (very smooth), B 20 (smooth), B 30 (medium smooth), B 40 (medium), B 50 (medium sharp), B 60 (sharp), and B 70 (very sharp). By using image data which gave the change of the examination posture and change of the Kernel value and are obtained, we analyzed through the noise value measurement and image evaluation of. The outside wire eversion orders the both hands and the examination posture is cost in the neck CT scan with the group P it drops below to the utmost. And in case of when reconstructing with B 40 (medium) or B 50 (medium sharp) being most analyzed into the inappropriate posture and Kernel value and applying the Kernel value to a clinical, it is considered to be very useful.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.3
• /
• pp.159-163
• /
• 1973

A by-product from glutamic acid fermentation prepared by treating the fermentation residue with sulfuric acid and ammonium hydroxide was studied in the light of its chemical properties by chemical analysis and X-ray diffraction technique. Its effectiveness as fertilizer was also investigated with corn as test plant. The results are summarized as following. 1. The chemical analyses and study with X-ray diffraction technique revealed that the by-product contains an appreciable quantity of water soluble ammonium as ammonium sulfate and ammonium chloride, water soluble amino acid and in-soluble organic carbon. Particularly, the X-diffraction pattern of the material indicated the presence of unidentified water soluble double salt of ammonium sulfate and ammonium chloride. 2. The water soluble ammonium in this material was found to be as effective as urea on the growth of corn plant. 3. The organic portion of the material was found to be equally effective on the growth of corn plant as the other sources of organic matter such as compost and rice bran. It was, however found that the organic matter in the fermentation residue is more persisting in the soil than the compost and rice bran. 4. It was noticed that the application of the fermentation by-product, lowers the soil pH significantly. Inspite of the pH lowering effect, the absorption of iron by corn plant was surpressed by the application of this material.

• Journal of Ginseng Culture
• /
• v.3
• /
• pp.11-37
• /
• 2021

Korean ginseng is the one of the most famous medicinal herbs globally and has long been a representative item of East Asian trade, including across China and Japan. Since Joseon (1392-1910) ginseng trade was entirely controlled by the state, The Veritable Records of the Joseon Dynasty are a valuable resource that can shed light on the history of the ginseng industry at that time. By studying the subsection "The Veritable Records of King Sejong" (世宗實錄), when ginseng was used even more widely, we assess the purpose and scale of its trade in the 15th century, identify its original listing in the geographical appendix, develop a distribution map, and explore similarities to current ginseng cultivation areas. During the reign of King Sejong (1418-1450), ginseng was sent to China as a tribute 101 times, with a combined weight of 7,060 kilograms, with less than one-third of that amount given to Japan and Okinawa. It was used to cover the travel expenses of foreign envoys and servants, but this can be seen to gradually decrease after the regnal mid-term, primarily due to a decrease in the amount of ginseng being collected. At the time, there were 113 areas of naturally growing ginseng as listed in the records' geographical appendix, including 12 recorded in the 'tributes' category: Yeongdeok-gun, Yeongju, and Cheongsong-gun in Gyeongsangbuk-do; Ulju-gun and Ulsan in Gyeongsangnam-do; Jeongeup, Wanju-gun, and Jangsu-gun in Jeollabuk-do; Hwasun-gun in Jeollanam-do; Goksan-gun and Sinpyeong-gun in Hwanghaebuk-do; Jeongju and Taecheon-gun in Pyeonganbuk-do; and Jaseong-gun and Junggang-gun in Jagang-do. A total of 101 places are recorded in the 'medicinal herbs' category, located throughout the mountains of the eight Joseon provinces, except the islands. In comparison with current ginseng cultivation sites, many of these historical areas are either consistent with or adjacent to contemporary locations. The geographical appendix to "The Veritable Records of King Sejong" was compiled in the early days of the king's reign (1432) when there was a lot of wild ginseng. The appendix is a valuable resource that indicates the possibility of growing ginseng on the Korean Peninsula in the future. The apparently natural habitats in the south, where ginseng is not currently cultivated, could be candidates for the future. Moreover, areas in the north where ginseng has not been grown, except Kaesǒng, could be a good alternative under sustainable inter-Korean exchange should cultivation sites move north due to climate warming.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.1025-1033
• /
• 2019

Although magnetic resonance imaging without linear hardening of CT is recognized as a method of obtaining high contrast of tissue and excellent resolution image in brain disease and head and neck examination, magnetic susceptibility artifact is generated in case of metal implants in the oral cavity, which is an obstacle to image diagnosis. Therefore, an effort was made in this thesis to find a method to reduce artifacts caused by dental implants and prosthesis in MRI. Implant-induced artifacts in magnetic resonance imaging showed that the signal size increased with shorter TE in GE technique and was inconsistent with water temperature change. In SE technique as well, the signal size of water was generally higher than that of air, but the signal to noise ratio (SNR) was not different by air and temperature. In EPI technique, images with fewer artifacts were obtained quantitatively and qualitatively when there was more water than air, and the signal to noise ratio was measured the highest, especially at water temperatures of 20° and 30°. In conclusion, when examining using the EPI technique rather than the SE or the GE technique, obtaining brain diffusion using a 20° and 30° water bag reduces the magnetic susceptibility artifacts caused by implants and prosthesis, suggesting that it may provide images with high diagnostic value.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.389-395
• /
• 2018

The study attempted to use computed tomography images to determine the usefulness of the reduction in the axial reduction algorithm in the event of a metallic artifacts reduction in the image of the beam-hardening effect, which is known as the most effective method of reducing metallic artifact reduction in the image and the reduction of the metal produced in this study. As a result, the result is increased to 140 kVp to reduce the value of the CT value by 0.02 to 0.05 %, resulting in decreased axial effect (P > 0.05). The CT value decreased from 12.4 to 26.9 % when applied to the reduction of the metallic. 12.4 to 26.9 % (p<0.05). In addition, in the qualitative assessment by the clinical trial evaluation, it was assessed as 1.8 points after applying the MAR algorithm, In the resolution of resolution and contrast evaluations, the estimation of the decrease in metallic artifact effects was assessed as the metal was assessed to be scored 7.2 points after the MAR algorithm was evaluated. Therefore, in case of artifacts due to irreversible beam hardening effect, it is useful to reduce artifacts caused by beam hardening effect by using various methods derived from existing researches and scanning by applying the metal artifact reduction algorithm proposed in this experiment.