• Title/Summary/Keyword: 공기의 저항

Search Result 496, Processing Time 0.024 seconds

Cooling effect of an electronic module with a variation of the inlet air temperature (유입공기의 온도변화가 전자모듈의 냉각에 미치는 영향)

  • 이진호;조성훈
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.4 no.1
    • /
    • pp.264-273
    • /
    • 2001
  • The conjugate heat transfer from a protruding module in a horizontal channel with a variation of air temperature is experimentally investigated. It is an aim of this study is to estimate temperature difference between a module and air. This study is performed with a variation of parameters that are air temperatures($T_i,=25^{\circ}C{\sim}55^{\circ}C),$ thermal resistance($R_c=158 K/W),$ air velocities ( 4V_i=0.1$ m/s~l.5 m/s ), and input power (Q=3 W, 7 W ). The results show that as the thermal resistance increases, the effect of air temperatures are decreased. And input power was most effective parameter on the temperature difference between a module and air.

  • PDF

Studies of Co-Fe based perovskite cathodes with fixed A-site cations (중 저온형 고체 산화물 연료전지를 Co-Mn 계열의 페로브스카이트 구조의 공기극에 관한 연구)

  • Park, Kwang-Jin;Kim, Jung-Hyun;Bae, Joong-Myeon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.11a
    • /
    • pp.364-367
    • /
    • 2006
  • The decrease of polarization resistance in cathode is the key point for intermediate temperature SOFC(Solid Oxide Fuel Cell). In this study, the Influence of Co substitution in B-site at perovskite PSCM (Pr0.3Sr0.7CoxMn(1-x)) was investigated. The PSCM series exhibits excellent MIEC(Mixed ionic Electronic Conductor) properties. The ASR(Area Specific Resistance) of PSCM3773 was $0.174{\Omega}cm^2\;at\;700^{\circ}C$. The activation energy of PSCM3773 was also lower than other compositions of PSCM. The ASR values were increased gradually during the thermal cycling test of PSCM37773 due to the delamination between electrolyte and cathode materials.

  • PDF

Centrifugal Blower with High Inlet Resistance (고 흡입저항을 가진 원심 송풍기)

  • Kim, Jae-Won
    • The KSFM Journal of Fluid Machinery
    • /
    • v.6 no.2 s.19
    • /
    • pp.15-22
    • /
    • 2003
  • Comprehensive study on a centrifugal blower for air-purifier involving a few physical filters for percolation process has been accomplished for an optimal design of the air handling system. The filtering media causes a flow resistance for induced flows by a rotating impeller. The present methodology is to adopt PIV system for velocity measurements and wind tunnel connected with an anechoic chamber for total performance test of the blower. Trial prototypes for the blades of a rotor and casing are presented for satisfaction of both flow rate and noise level set by design objectives. Tapered blades with a special casing for a fan show good performance data. The results of velocity fields also explain the reason of improvements of the blower performance.

Air Flow Analysis on Driving Truck with or without Side Pairing (사이드 페어링 장착 유무에 따른 구동 트럭에서의 공기 유동 해석)

  • Choi, Kyekwang;Cho, Jaeung
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.19 no.5
    • /
    • pp.14-20
    • /
    • 2020
  • In this study, the overall states of the airflow when a truck with or without side pairing is driven at a maximum speed of 90 km/h, regulated by domestic law, were investigated through computational fluid dynamics numerical analysis. All the tested models showed that the airflow went under the truck body; specifically, the air did not flow along the underside to the rear of the truck but through the sides of its underside. The drag with the drag coefficient at model 3 was clearly higher than those for the other two models. The results of this study could help to improve the truck performance by reducing its resistance against the air flown from it in driving itself.

Fallen Distance Measure of Vehicle Using Parabolic Motion (포물선 운동을 이용한 자동차의 떨어진 거리 측정)

  • Shin, Seong-Yoon;Pyo, Sung-Bae;Shin, Kwang-Seong;Lee, Hyun-Chang;Rhee, Yang-Won
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2011.01a
    • /
    • pp.63-64
    • /
    • 2011
  • 포물체란 중력이 작용하는 환경에서 어떤 속도로 던져진 물체를 뜻합니다. 예를 들자면, 박찬호 선수가 포수를 향하여 던진 야구공이라든지, 박세리 선수의 스윙으로 그린을 향하여 날아가고 있는 골프공, 그리고 목표물을 향하여 날아가고 있는 포탄은 모두 포물체입니다. 이 물체는 수직방향으로는 중력의 영향을 받고 공기의 저항을 무시한다면 수평방향으로는 힘을 받지 않기 때문에 포물선운동을 한다. 본 논문에서는 포물체의 운동을 이용하여 도로의 일부가 유실되어 없어진 곳을 실험 대상을 한다. 여기에서 속도가 일정하게 달리던 자동차가 유실된 도로의 가장자리를 넘어갔을 때 도로의 가장자리로에서 얼마나 멀리 가서 떨어지는지를 나타내었다.

  • PDF

Study on the cathode delamination of solid oxide fuel cell (고체산화물 연료전지의 공기극 박리 현상에 관한 연구)

  • Park, Kwang-Jin;Bae, Joong-Myeon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.11a
    • /
    • pp.139-142
    • /
    • 2009
  • In this study, the performance degradation of SOFC single cell caused by the delamination between a cathode and an electrolyte is investigated. As the delamination rate increases, the voltage sharply decreases due to the decrease of reaction sites and losses increase. The current is concentrated to the intact area so that the current density is increased and the ohmic loss and the activation loss become higher. Most part of loss is due to the ohmc loss of electrolyte.

  • PDF

Synthesis and Characterization of LSCF/CGO Composite Used as SOFC Cathode Materials (SOFC 용 LSCF/CGO 공기극의 제조 및 특성연구)

  • Park, Jae-Layng;Lim, Tak-Hyoung;Lee, Seung-Bok;Park, Seok-Joo;Shin, Dong-Ryul;Song, Rak-Hyun
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.11a
    • /
    • pp.184-186
    • /
    • 2009
  • Composites of LSCF($La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ and CGO(gadolinium doped ceria) is an efficient candidate cathode material with CGO electrolytes. In this study, LSCF with exact perovskite structure was synthesized by using solid state reaction(SSR) method. The optimized temperature to synthesize $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-\delta}$ with rhombohedral structure. was $1100^{\circ}C$. The polarization resistance of the LSCF/CGO(50:50 wt.%) was smaller than those of other composite cathodes. The analysis of the EIS data of LSCF/CGO suggests that the diffusion and adsorption-desorption of oxygen can be the key process in the cathodic reaction of SOFC using LSCF/CGO as cathode material.

  • PDF

Effect of Sintering Atmosphere on the Electrical and Chemical Characteristics of the Grain Boundaries of $SrTiO_3$Ceramics Prepared from Semiconducting powders (반도체 분말을 이용하여 제조된 $SrTiO_3$소결체의 소결 분위기에 따른 입계 화학 및 전기적 특성)

  • 박명범;조남희
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.12
    • /
    • pp.1150-1158
    • /
    • 2000
  • 반도성 SrTiO$_3$분말을 이용하여 상압에서 제조된 소결체의 소결 분위기에 따른 소결체 입계의 결함 화학 및 전기적 특성을 고찰하였다. 소결 분위기를 질소-수소, 질소, 공기로 변화시킴에 따라서 입계에서 O/(Sr+Ti)의 비는 1.6로부터 2.1로 증가하였으며, 또한 입계의 과잉 음전하층에서 전하 밀도는 1C/$ extrm{cm}^2$로부터 1.26C/$\textrm{cm}^2$로 증가하였다. 소결체의 문턱 전압, 입계 저항 그리고 입계 전위 장벽은 소결 분위기를 질소-수소로부터 공기로 변화시킴에 따라 6.40-1000 V/cm, 2.70-3050 kΩ 그리고 0.08-10.9 eV로 각각 증가하였다.

  • PDF

Maximum Height and Velocity of Jumping Car (도약한 차량의 최대 높이 및 속도)

  • Shin, Kwang-Seong
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2012.01a
    • /
    • pp.59-60
    • /
    • 2012
  • 자유 낙하하는 물체가 받는 힘은 중력 뿐이다. 우리는 중력만을 받아서 운동하는 것을 자유 낙하 운동이라고 하고 자유 낙하하는 물체를 자유낙체라 한다. 다시 말해서, 물체의 초기 운동 상태와 무관하게 중력의 영향으로만 자유롭게 낙하하는 물체를 말하는 것이다. 본 논문에서는 공기의 저항을 무시하고, 수직방향으로 짧은 거리의 범위 내에서 고도에 의한 자유낙하 가속도의 변화가 없다는 가정을 하고, 자동차가 수직 상 방향으로 출발하여 도약하고 최고점에 도달하는 시간, 최대높이, 자동차가 출발 위치로 돌아오는 시간과 자동차의 속도, 자동차가 땅에 떨어질 때의 시간 및 속도에 대해 알 수 있다.

  • PDF

Permeation and diffusion of gases through polytetrafluoroethylene membrane (Polytetrafluoroethylene막을 통한 기체의 투과 및 확산)

  • 김형민;김남인;이우태
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1994.10a
    • /
    • pp.34-35
    • /
    • 1994
  • 기체혼합물의 분리및 정제기술은 에너지 절약의 관점과 새로운 기능성 고분자의 개발로 고분자막에 의한 분리법이 관심을 끌게되었다. 공기로부터 산소부화, 방사성 크세논 및 크립론의 제거, 제련소 폐가스증의 수소분리, 천연가스로부터 헬륨의 회수분야등은 실제로 산업적으로 실용화되고 있다. 그러나 고분자막은 일반적으로 투과성과 선택성이 서로 상반되는 경향을 나타내므로, 투과성과 분리성이 좋은 기능성 고분자막의 개발에 다양한 연구가 필요로 하고있다. 본 연구에서 사용한 PTFE(polytetrafluoroethylene)는 결정성 고분자로서 넓은 온도범위에서 낮은 마찰계수, 우수한 전기적 절연특성, 강한 Carbon-fluorine 겹합에 기인한 높은 열적 안정성, 화확적 불활성때문에 공업용 고분자 재료로서 독특한 위치를 차지하고 있다. 최근에 미국과 일본을 주축으로 상용화딘 공기전지(Zinc-air battery)는 PTFE막의 뛰어난 소수성과 화학적 저항성으로 수은 전지의 대체품으로 주목받고 있는데, 장기 방전시 성능 저하가 따르므로 막을 통한 산소투과성을 방전에 필요한 최소값으로 감소시키는 것이 중요한 과제가 되고있다.

  • PDF