• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.137-144
• /
• 2018

The study figured out the operational conditions of a two-way movement actuator made of one-way shape memory alloy (OWSMA) for versatile ventilation intelligent garments. To develop a low-power actuator that consumes energy only when a garment changes its form such as opening and closing, multiple channels of OWSMA were used, and optimum diameter of the wires was examined. For the switch device, optimum voltage application unit time was determined. Optimum diameter of OWSMA wire was determined by applying 3.7V to the pre-determined candidate diameters, which demonstrated two-way operation in previous studies. In order to evaluate the optimum voltage application time, the internal diameter of the actuator was measured while increasing and decreasing by 50 ms from the unit time of voltage application. Delay time under two-way operation of the actuator was measured to minimize interference caused by heat between channels. Power of 3.7V was applied to OWSMA for assessment of optimal time, and the whole process from heating to cooling was video-recorded with a thermal image camera to determine the point of time at which the temperature of OWSMA wire dropped below the phase transformation temperature. The results showed that $0.4{\Phi}$ was the most suitable diameter, and the optimum unit time of voltage applied to open and close the actuator was 4100ms. It was also shown that the delay time should be more than 1.8 seconds between two-way operations of the actuator.

• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.26-32
• /
• 2018

The Northeast China is an important site geologically and geophysically because of a huge volcano called Mt. Baekdu, which is one of the largest volcanoes in the world. Signs of eruption have been recently observed and people are keen to its behavior. We carried out relative travel time tomography to investigate the velocity structure between 100 ~ 600 km depth beneath Northeast China. We used teleseismic data during 2009 ~ 2011 recorded in NecessArray provided by IRIS (Incorporated Research Institute for Seismology). The relative observations were obtained by using the multi-channel cross-correlation method. Based on the tomographic results, we observed that the locations beneath which low-velocity zones are observed coincide with the locations of several volcanic regions in Northeast China. A low-velocity anomaly is revealed beneath Mt. Baekdu down to 600 km depth, which is thought to the main origin of the magma supply for Mt. Baekdu. Another low velocity anomaly is observed beneath east of the Datong volcano down to around 300 km depth, which is inferred to be related to an upwelling from deep mantle. We observed a low velocity anomaly beneath the Wudalianchi volcano down to around 200 km depth, which may imply that this volcano has been formed by an upwelling from the asthenosphere.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.56-61
• /
• 2015

The effects of the growth temperature on the properties of a-plane GaN epi-layer on r-plane sapphire by HVPE were studied, when the constant V/III ratio and the flow rate of HCl for the Ga source channel was fixed at 10 and 700 sccm, respectively. Additionally the effects of V/III ratios for source gasses were studied when growth temperature and the flow rate of HCl for the Ga source channel was fixed at $1000^{\circ}C$ and 700 sccm, respectively. As the growth temperature was increased, the values of Full Width Half Maximum (FWHM) for Rocking curve (RC) of a-plane GaN (11-20) epi-layer were decreased and thickness of a-plane GaN epi-layer were increased. As V/III ratios were increased at $1000^{\circ}C$, the values of FWHM for RC of a-plane GaN (11-20) were declined and thickness of a-plane GaN epi-layer were increased. The a-plane GaN (11-20) epi-layer grown at $1000^{\circ}C$ and V/III ratio = 10 showed the lowest value FWHM for RC of a-plane GaN (11-20) for 734 arcsec and the smallest dependence of Azimuth angle for FWHM of (11-20) RCs.

• Journal of Distribution Research
• /
• v.16 no.5
• /
• pp.19-41
• /
• 2011

Home shopping is called the flower of future distribution. Among them, for TV home shopping, Korea should lead the industry as an advanced country in IT technology. It is difficult for small and medium businesses, however. This is due to the failure of the policies of Korea Communications Commission. In order to complement such policy failure, this study intends to analyze the preceding domestic studies and foreign status, and reflect such on the policy. Especially the domestic business will be predicted through foreign home shopping status and policy cases, and the items that should be supplemented with governmental policy in order to vitalize small & medium businesses were analyzed; these should be actively reflected by the government. In case of general PP, it already runs on the registration system, and the home shopping channel should also be the same and be committed to the market. The increased number of channels would allow a greater opportunity for small and medium businesses who are the suppliers, and for the consumers, the product prices would be able to be stabilized at an appropriate cost and high quality and diversity of items could be obtained through home shopping, thus improving consumer welfare. If it is difficult to adopt the registration system for home shopping right away, the best alternative is to strengthen the approval system. As home shopping requires a re-approval every 3 years, strengthened re-approval conditions would resolve part of the problem.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.553-558
• /
• 2011

This paper describes the development and test result of S-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels, S-band for Telemetry & Command and X-band for mission data. S-band Transmitter(STX) functionally made of modulator, frequency synthesizer, power amp and DC/DC converter. The transmission data is modulated by FSK(Frequency Shift Keying) and the interface between spacecraft sub-module and STX is RS-422 standard method. The FM STX is based on modular design. The RF output power of STX is 1.5W(31.7dBm) and BER of STX is under $1{\times}10^{-5}$ which meets the specification respectively. The FM STX is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.195-202
• /
• 2004

This paper introduces the design or parallel Pipeline high-speed analog-to-digital converter(ADC) for the high-resolution video applications which require very precise sampling. The overall architecture of the ADC consists of 4-channel parallel time-interleaved 10-bit pipeline ADC structure a]lowing 200MSample/s sampling speed which corresponds to 4-times improvement in sampling speed per channel. Key building blocks are composed of the front-end sample-and-hold amplifier(SHA), the dynamic comparator and the 2-stage full differential operational amplifier. The 1-bit DAC, comparator and gain-2 amplifier are used internally in each stage and they were integrated into single switched capacitor architecture allowing high speed operation as well as low power consumption. In this work, the gain of operational amplifier was enhanced significantly using negative resistance element. In the ADC, a delay line Is designed for each stage using D-flip flops to align the bit signals and minimize the timing error in the conversion. The converter has the power dissipation of 280㎽ at 3.3V power supply. Measured performance includes DNL and INL of +0.7/-0.6LSB, +0.9/-0.3LSB.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1175-1184
• /
• 2015

Recently, there has been an explosive increase in the volume of multimedia data that is available as a result of the development of multimedia technologies. More and more data is becoming available on a variety of web sites, and it has become increasingly cost prohibitive to have a single data server store and process multimedia files locally. Therefore, many service providers have been likely to outsource data to cloud storage to reduce costs. Such behavior raises one serious concern: how can data users be authenticated in a secure and efficient way? The most widely used password-based authentication methods suffer from numerous disadvantages in terms of security. Multi-factor authentication protocols based on a variety of communication channels, such as SMS, biometric, or hardware tokens, may improve security but inevitably reduce usability. To this end, we present a data block-based authentication scheme that is secure and guarantees usability in such a manner where users do nothing more than enter a password. In addition, the proposed scheme can be effectively used to revoke user rights. To the best of our knowledge, our scheme is the first data block-based authentication scheme for outsourced data that is proven to be secure without degradation in usability. An experiment was conducted using the Amazon EC2 cloud service, and the results show that the proposed scheme guarantees a nearly constant time for user authentication.

• Journal of Life Science
• /
• v.34 no.6
• /
• pp.426-433
• /
• 2024

The environmental stress that plants are most susceptible to is water stress. Abscisic acid (ABA) is a plant hormone synthesized by plants to counteract environmental stress. The role of stomata in plants is to allow the synthesis of sucrose by absorbing CO₂, which greatly affects photosynthetic activity. In addition, stomata are pathways for transpiration, which releases H₂O and help establish a water potential gradient that allows plant roots to continuously absorb water and inorganic substances from the soil. Plants have a mechanism to minimize water loss by closing their stomata when exposed to water-stressed environments. The most well-studied hypothesis concerning the mechanism of stomatal closure is the response to water stress. When a plant receives sufficient water, its stomata open during the day and close at night due to its circadian rhythm. In addition, stomatal closure occurs when the concentration of CO₂ in the intercellular space increases. However, the mechanism of stomatal closure due to circadian rhythm and increased CO₂ concentration in the intercellular space is not well understood. When plants undergo water stress, the increased concentration of ABA in the guard cell cytoplasm induces an increase in Ca²⁺ concentration, resulting in cytoplasmic depolarization. As a result, the outward K⁺-channel of the tonoplast and the slow-type anion channels SLAC1 and SLAH3 are activated, releasing K⁺, Cl^-, and malate^2-, causing the stomata to close. Therefore, in this paper, the mechanism of stomatal closure caused by water stress was investigated.

• Information Systems Review
• /
• v.18 no.4
• /
• pp.141-154
• /
• 2016

Mobile application is growing explosively with the advent of a new technology: smartphones. Mobile application is a new marketing channel and performs as a start-up platform. This study examines the effect of mobile application on the off-line market. Despite the continuous declining demand for taxi service, paradoxically, the supply of taxi service has increased. The taxi industry can be categorized into general taxi and call taxi. General taxi is accidental and inefficient because it has to search for its own passenger. As call taxi takes the request of a passenger, it is more efficient than general taxi. However, the current defective passenger-taxi driver matching system and insufficient taxi driver management hinder the development of the call taxi market. Differences in differences (DID) is an econometrical methodology that examines whether or not an event has meaningful influence. This research uses DID to investigate the effect of the Kakao taxi application on the call taxi industry. Furthermore, it examines the effect of major companies' reckless diversification, which is considered unethical behavior. The passengers of call taxi data from August 2014 to July 2015 and those of designated driving service data of the same period were collected as the control group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.563-569
• /
• 2018

This paper is on the implementation of a system for automatically monitoring window farm hydroponics based on Arduino (utilizing Arduino's open source code) emerging as the icon of the Fourth Industrial Revolution. A window farm, which means window-type hydroponics, is offered as an alternative to fulfill the desires of people who want to grow plants aside from the busy daily life in the city. The system proposed in this paper was developed to automatically monitor a window farm hydroponics cultivation environment using the Arduino UNO board, a four-charmel motor shield, temperature and humidity sensors, illumination sensors, and a real-time clock module. Modules for hydroponics have been developed in various forms, but power consumption is high because most of them use general power and motors. Since it is not a system that is monitored automatically, there is a disadvantage in that an administrator always has to manage its operational state. The system is equipped with a water supply that is most suitable for a plant growth environment by utilizing temperature, humidity, and light sensors, which function as Internet of Things sensors. In addition, the real-time clock module can be used to provide a more appropriate water supply. The system was implemented with sketch code in a Linux environment using Raspberry Pi 3 and Arduino UNO.