• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.243-246
• /
• 1998

집속음장의 고조파성분을 이용한 초음파영상의 특성을 해석하기 위해 집속된 가우스 음원에 직선 edge를 초점면 및 초점면의 전, 후방에 삽입하여 edge의 후방에서 생성되는 음장을 조사하였다. 계산에서는 그린함수의 간단화를 위해 Fresnel근사를 이용하였고, 실험에서는 성형전극을 형성시킨 1.9MHz 요면진동자에 의한 가우스분포의 음장을 갖는 초음파빔에 수직하게 edge를 삽입시켰다. 음장의 이론해석 및 실험결과, 초점면의 제2고조파의 빔형상을 제외하고는 계산치와 실험치가 잘 일치하고 있으며, 제2고조파의 공간 분해능이 기본파에 비해 높음을 알았다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.2
• /
• pp.28-31
• /
• 1977

Normal modes of carrier waves due to longitudinal modulation in solids have been defined. The dispersion relationship of these waves in the presence of collision effects and thermal diffusion is derived and examined in detail. It is also shown that the carrier waves are reduced to the wellknown space-charge waves and electroacoustic hayes in special cases.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.3
• /
• pp.247-258
• /
• 2004

Two 3-dimensional data processing techniques to predict the fractured zone ahead of a tunnel face by the tunnel seismic survey were proposed so that the geometric formation of the fractured zone could be estimated. The first 3-dimensional data processing technique was developed based on the principle of ellipsoid, The input data needed for the 3D migration can be obtained from the 2-dimensional tunnel seismic prediction (TSP) test where the TSP test should be performed in each sidewall of a tunnel. The second 3-dimensional migration technique that was developed based on the concept of wave travel plane was proposed. This technique can be applied when the TSP is operated with sources in one sidewall of a tunnel while the receivers are installed in both sidewalls. New migration technique was applied to an in-situ tunnelling site. The 3-dimensional migration was performed using measured TSP data and its results were compared with the geological investigation results that were monitored during tunnel construction. This comparison revealed that the proposed migration technique could reconstruct the discontinuity planes reasonably well.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.6
• /
• pp.83-90
• /
• 2007

Today, many studies are progressed about source of vibration oscillator in reinforcement concrete structures. Source of vibration oscillator is load when it is happen from walking inhabitant. It is transmitted to another inhabitant through reinforcement concrete plate, and it is type of elastic wave. Those descriptions are ram wave and primary wave, secondary wave, and the are through the surface and inside plate. Analysis studies of those waves are used to piezoelectric materials. But, they are difficult to 3 axial type of transmitting elastic wave in concrete element. In this study, a fundamental study for source estimations of vibration oscillator using micro accelerometer are discussed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.3
• /
• pp.291-299
• /
• 2003

Electrical resistivity prospecting has been recently increased in the application to tunnel, landslide and other investigations in the civil engineering field. Therefore, it is essential to establish the rock mass classification technique using electrical resistivity data. In this paper, the authors, try to propose a technique which can classify tunnel rock mass using seismic wave velocities derived from electrical resistivity data. In addition, the applicability of the proposed tunnel rock mass classification technique is discussed, by comparing estimated support patterns with actually performed ones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1643-1648
• /
• 2005

MIMO system takes advantage of the spatial diversity obtained by spatially separated antennas for high- performance and high-capacity broadband wireless access. In this paper, we propose Carrier Interferometry coded MIMO-OFDM system (MIMO-CI/OFDM) which provides frequency and spatial diversity. One combined diversity gains featly improve the performance of OFDM systems. To perform a performance analysis, we have used SPW platform that provides an easy tool to analyze the performance. The results show that the performance of MIMO-CI/OFDM shows an approximately 4dB gain over the MIMO-OFDM even in highly frequency selective fading channels.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.39-46
• /
• 2006

This paper analyzes the continuous Galerkin method for the space-time discretization of wave equation. The method of space-time finite elements enables the simple solution than the usual finite element analysis with discretization in space only. We present a discretization technique in which finite element approximations are used in time and space simultaneously for a relatively large time period called a time slab. The weighted residual process is used to formulate a finite element method for a space-time domain. Instability is caused by a too large time step in successive time steps. A stability problem is described and some investigations for chosen types of rectangular space-time finite elements are carried out. Some numerical examples prove the efficiency of the described method under determined limitations.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.2 s.20
• /
• pp.13-19
• /
• 2006

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.39-53
• /
• 1991

디지탈 기기를 포함한 일반적인 전기전자기기로 부터 발생하는 방해전자파는, 낮은 주파수 대역(MF, HF 대역)에서는 전원성 등의 도선을 따라서 전달(전도성 방해파)되고, 높은 주파수 대역(VHF, UHF 대역)에서는 직접 공간에 방사(방사성 방해파)된다. 이러한 전도성 및 방사성 방해파의 측정은 IEC, CISPR, FCC, VDE 등의 규격이 정하고 있는 규정에 따라서 실시된다. 이들 규격은 방해파 측정법을 규정하고 있을 뿐만 아니라, 재현성이 좋은 측정을 실현시키기 위해 측정용 시설에 대해서도 자세하게 규정하고 있다. 방사성 방해파의 측정에 사용하는 측정시설로서는, 기본적으로 야외시험장(Open Area Test Site, OATS)을 사용하도록 규정하고 있는데, 측정치의 상호연관성을 위해서는 규약에 정해진 적합성이 평 가되고 확인되어 있어야만 한다. 여기서는 방사성 방해파 측정용 시설중에서 가장 기본적이고도 중요한 야외시험장의 적합성 평가 파 라미터 - 두 지점간의 전송손실, 이를 시험장감쇠량 이라함 - 에 대하여 기술하기로 한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.397-400
• /
• 2004

소음원 또는 방사음장을 가시화하기 위하여 소음원을 둘러싸는 한 면에서의 음압측정을 통해 임의의 3차원 공간상의 음향 물리량을 예측하는 음향 홀로그래피 방법이 사용되고 있으며 이때 반사파가 존재하지 않는 기본 가정을 만족해야 한다. 반사파가 존재하는 경우에는 반사파를 보정하거나 또는 반사파의 음장이 미치는 영향이 무시할 만큼 작다고 가정하여 음장 예측이 가능하게 된다. 최근 해양연구원에서는 음향 홀로그래피 방법을 이용하여 수중음장을 가시화하는 시스템을 개발하였으며 시스템 검증을 위해 무향수조 내 단순음원을 이용하여 음장예측을 수행하였다. 무향수조 표면에는 흡음처리가 되지 않아 표면 반사파가 존재하나 해석 결과 반사파의 영향이 작은 경우에는 반사파를 무시하고 음장해석의 수행이 가능함을 확인하였다.