• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.53-60
• /
• 2004

Congestion index is needed for quantifying congestion level for various areas. So far, the index has been calculated based on multiple vehicle data for specified time interval. Such being the case, it was costly to build it and the usage of it was focused on policy development and evaluation rather than on traffic information provision. This study focuses on a development on a single vehicle based congestion index which can be a representative value for link congestion level and link speed information at the same time for dual purposes of traditional usages and information provision. A new term has been added for representing real time based arterial congestion level and it has been verified on a real time basis. The index was based on single vehicle GPS data and seemed to be cost effective in deriving the index. With the help of the index, the traffic information contents can be diversified in a constructive way in providing real time traffic information for ITS area and in using congestion level determination for traditional transportation areas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.4
• /
• pp.431-439
• /
• 2010

Cross-interferometic synthetic aperture radar (CInSAR) technique from ERS-2 and Envisat images is capable of generating submeter-accuracy digital elevation model (DEM). However, it is very difficult to produce high-quality CInSAR-derived DEM due to the difference in the azimuth and range pixel size between ERS-2 and Envisat images as well as the small height ambiguity of CInSAR interferogram. In this study, we have proposed an efficient method to overcome the problems, produced a high-quality DEM over northern Alaska, and compared the CInSAR-derived DEM with the national elevation dataset (NED) DEM from U.S. Geological Survey. In the proposed method, azimuth common band filtering is applied in the radar raw data processing to mitigate the mis-registation due to the difference in the azimuth and range pixel size, and differential SAR interferogram (DInSAR) is used for reducing the unwrapping error occurred by the high fringe rate of CInSAR interferogram. Using the CInSAR DEM, we have identified and corrected man-made artifacts in the NED DEM. The wave number analysis further confirms that the CInSAR DEM has valid Signal in the high frequency of more than 0.08 radians/m (about 40m) while the NED DEM does not. Our results indicate that the CInSAR DEM is superior to the NED DEM in terms of both height precision and ground resolution.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.137-153
• /
• 2019

Estimating tunnel construction time and costs are the most fundamental part of a tunnel project planning, which has been generally assessed on a deterministic basis until now. In this paper, excavation cycle time was investigated for two road tunnels and one subway tunnel, and the results were compared with the Standard of Construction Estimate (SE), which is made for the estimation of construction time and cost in a design stage. The results show that the difference in cycle time between SE and actual cycle time is 50%, 7% and 31% respectively for the three tunnels, which means that SE does not reflect practical operation time. The major reasons of the difference are skilled level of tunneling workers, the change of operation sequences for more effective operations, much more complicated working atmosphere in a tunnel than the assumption of SE etc. Finally, even though the results can not be generalized since investigated tunnels are only 3, but it is thought that SE needs to be upgraded into the model able to consider quite common situations through additional tunnel investigation and studies in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.546-559
• /
• 2021

This research aimed to develop the district unit plan simulation using procedural modeling based on shape grammar. For this, Esri's CityEngine 2020.0 was selected as a main development tool, and Inside Commercial Area in Bangi-dong, Songpa-gu, Seoul as the research site where about 25% of the total area was developed over the past five years. Specifically, the research developed the simulation through the following three phases of Data-Information-Knowledge after selecting necessary parameters. In the Data phase, 2 and 3 dimensional data were obtained by utilizing data sharing platforms. In the next Information phase, the acquired data were generated into various procedural models according to the shape grammar, and the 2D and 3D layers were then integrated using relevant applications. In the final Knowledge phase, three-dimensional spatial analysis and storytelling contents were produced based on the integrated layer. As a result, the research suggests the following three implications for the simulation development. First, data accuracy and improvement of sharing platforms are needed in order to effectively carry out the simulation development. Second, the guidelines for district unit plans could be utilized and developed into shape grammar for procedural modeling. Third, procedural modeling is expected to be used as an alternative tool for communication and information delivery.

• Spatial Information Research
• /
• v.20 no.5
• /
• pp.99-109
• /
• 2012

Recently, due to the growth of social media and spread of smart-phone, the amount of data has considerably increased by full use of SNS (Social Network Service). According to it, the Big Data concept is come up and many researchers are seeking solutions to make the best use of big data. To maximize the creative value of the big data held by many companies, it is required to combine them with existing data. The physical and theoretical storage structures of data sources are so different that a system which can integrate and manage them is needed. In order to process big data, MapReduce is developed as a system which has advantages over processing data fast by distributed processing. However, it is difficult to construct and store a system for all key words. Due to the process of storage and search, it is to some extent difficult to do real-time processing. And it makes extra expenses to process complex event without structure of processing different data. In order to solve this problem, the existing Complex Event Processing System is supposed to be used. When it comes to complex event processing system, it gets data from different sources and combines them with each other to make it possible to do complex event processing that is useful for real-time processing specially in stream data. Nevertheless, unstructured data based on text of SNS and internet articles is managed as text type and there is a need to compare strings every time the query processing should be done. And it results in poor performance. Therefore, we try to make it possible to manage unstructured data and do query process fast in complex event processing system. And we extend the data complex function for giving theoretical schema of string. It is completed by changing the string key word into integer type with filtering which uses keyword set. In addition, by using the Complex Event Processing System and processing stream data at real-time of in-memory, we try to reduce the time of reading the query processing after it is stored in the disk.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.100-119
• /
• 2020

During recent years, the heat environment and particulate matter (PM₁₀) have become serious environmental problems, as increases in heat waves due to rising global temperature interact with weakening atmospheric wind speeds. There exist urban heat islands and urban pollution islands with higher temperatures and air pollution concentrations than other areas. However, few studies have examined these issues together because of a lack of micro-scale data, which can be constructed from spatial data. Today, with the help of satellite images and big data collected by private telecommunication companies, detailed spatial distribution analyses are possible. Therefore, this study aimed to examine the spatial distribution patterns of urban heat islands and urban pollution islands within Busan Metropolitan City and to compare the distributions of the two phenomena. In this study, the land surface temperature of Landsat 8 satellite images, air temperature and particulate matter concentration data derived from a private automated meteorological observation system were gridded in 30m × 30m units, and spatial analysis was performed. Analysis showed that simultaneous zones of urban heat islands and urban pollution islands included some vulnerable residential areas and industrial areas. The political migration areas such as Seo-dong and Bansong-dong, representative vulnerable residential areas in Busan, were included in the co-occurring areas. The areas have a high density of buildings and poor ventilation, most of whose residents are vulnerable to heat waves and air pollution; thus, these areas must be considered first when establishing related policies. In the industrial areas included in the co-occurring areas, concrete or asphalt concrete-based impervious surfaces accounted for an absolute majority, and not only was the proportion of vegetation insufficient, there was also considerable vehicular traffic. A hot-spot analysis examining the reliability of the analysis confirmed that more than 99.96% of the regions corresponded to hot-spot areas at a 99% confidence level.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.175-185
• /
• 2020

Three-dimensional registration is a process of matching data with or without a coordinate system to a reference coordinate system, which is used in various fields such as the absolute orientation of photogrammetry and data combining for producing precise road maps. Three-dimensional registration is divided into a method using points and a method using linear features. In the case of using points, it is difficult to find the same conjugate point when having different spatial resolutions. On the other hand, the use of linear feature has the advantage that the three-dimensional registration is possible by using not only the case where the spatial resolution is different but also the conjugate linear feature that is not the same starting point and ending point in point cloud type data. In this study, we proposed a method to determine the scale and the three-dimensional translation after determining the three-dimensional rotation angle between two data using quaternion to perform three-dimensional registration using linear features. For the verification of the proposed method, three-dimensional registration was performed using the linear features constructed an indoor and the linear features acquired through the terrestrial mobile mapping system in an outdoor environment. The experimental results showed that the mean square root error was 0.001054m and 0.000936m, respectively, when the scale was fixed and if not fixed, using indoor data. The results of the three-dimensional transformation in the 500m section using outdoor data showed that the mean square root error was 0.09412m when the six linear features were used, and the accuracy for producing precision maps was satisfied. In addition, in the experiment where the number of linear features was changed, it was found that nine linear features were sufficient for high-precision 3D transformation through almost no change in the root mean square error even when nine linear features or more linear features were used.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1295-1299
• /
• 2006

횡월류위어는 홍수 피해 경감을 위해 계획되는 방수로나 저류지의 유입부에 주로 사용된다. 따라서 이러한 횡월류위어를 통해 방수로나 저류지로 월류되는 월류량을 정확히 예측하는 것은 이러한 시설의 홍수 피해 경감 능력을 예측하는데 있어 매우 중요하다. 횡월류위어를 통해 흐르는 흐름은 매우 복잡하기 때문에 일반적으로 이러한 흐름을 분석하는 것은 매우 어렵다. 따라서 대부분의 횡월류위어 유량계수 공식은 De Marchi의 해석해와 다양한 실험 자료에 근거하여 제시되고 있다. 따라서 지금까지 횡월류위어 유량계수에 대하여 많은 공식이 제안되어 왔지만, 대부분의 공식이 유사한 형태를 가지고 있으며, 횡월류위어의 상류에서의 프루드수$(Fr_1)$를 제일 중요한 설계 인자로 고려하고 있다. 그러나 최근 횡월류위어에 대한 연구가 점차 발전됨에 따라 횡월류위어 상류에서의 프루드수 외에도 위어높이와 횡월류위어 상류 수심의 비(h/y), 그리고 횡월류위어의 길이와 본류 폭의 비(L/B) 등이 고려되고 있다. 그 중에서 L/B 의 효과는 점차 중요하게 고려되고 있다. 그러나 대부분의 연구자들이 사용한 실험 장비들은 상 대적으로 높은 L/B 조건을 가지는데 반하여, 현재 국내에서 계획되고 있는 천변저류지 등에 설계된 횡월류위어의 설계 범위는 대체로 $1/10{\sim}1/200$이므로 기존 연구자들의 실험 범위와 매우 다르다고 할 수 있다. 따라서 본 연구에서는 상대적으로 폭이 넓은 실험 수로를 이용하여 횡월류예연위어의 유량 계수에 대한 실험을 수행하였다. 지금까지의 실험 결과에 의하면 동일한 실험 조건에 대해서 기존 연구자들에 의해서 제안된 공식으로 계산한 유량계수 보다 측정된 자료를 이용하여 계산한 유량계수의 값이 상대적으로 더 큰 것 으로 나타났다. 통해 배수될 때 암석이 머금고 있는 물로 인해 추가적으로 발생하는 중력은 다른 재료가 가지지 못한 화산석의 또 다른 장점이라 할 수 있다.서는 자료변환 및 가공이 필요하다. 즉, 각 상습침수지구에 필요한 지형도는 국립지리원에서 제작된 1:5,000 수치지형도가 있으나 이는 자료가 방대하고 상습침수지구에 필요하지 않은 자료들을 많이 포함하고 있으므로 상습침수지구의 데이터를 인터넷을 통해 서비스하기 위해서는 많은 불필요한 레이어의 삭제, 서비스 속도를 고려한 데이터의 일반화작업, 지도의 축소.확대 등 자료제공 방식에 따른 작업 그리고 가시성을 고려한 심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1530-1534
• /
• 2006

원격탐사 기법을 이용한 수심측정은 하나 혹은 그 이상의 파장대에서 수심과 반사되는 에너지 사이의 관계를 찾아내는데 달려 있다. 수심 정보를 획득하기 위한 스펙트럼의 최적 파장길이는 다중분광영상(Landsat 7 ETM)의 blue band에 해당하는 약 $0.48{\mu}m$이며, 이 band를 이용하여 연안의 수심을 측량하기도 한다. 하지만 단일밴드에 의해서 측정된 값을 이용한 수심측정은 해저표면에 의한 반사에 심각한 영향을 받을 수 있기 때문에 신뢰할 만한 결과를 얻을 수 없다. 따라서 본 연구에서는 해수와 관련한 여러 가지 변수들을 결정하기 위하여 다량의 실측 데이터를 필요로 하지 않는 선형다중밴드방식을 이용하여 2개의 Landsat 영상으로 태화강 하구의 수심정보를 추출하고 태화강 본류에 대한 수심정보획득과 하상변동에 대한 분석 가능성을 파악하였다. 그 결과 임의로 선정한 표본 50개 지점에 대한 영상분석에 의한 수심값과 해도의 수심값의 잔차 평균이 각각 2.29m, 2.43m로 비교적 큰 잔차를 보였다. 하지만 20m 미만의 수심대의 표본만을 확인한 결과 각각 1.73m, 1.88m로 잔차 평균이 크게 감소하였다. 2000년, 2003년 영상을 비교한 결과, 1번 2번 3번 지역에서 평균적으로 약 1.838m정도 2003년 수심이 감소한 것으로 나타났다. 본 연구에서 20m 미만의 수심 측량은 낮은 해상도의 위성영상이라도 실제 수심과 근접하고 있는 것으로 판단 할 수 있었다. 이것으로 넓은 지역을 경제적으로 수심자료를 획득할 수 있는 위성영상분석을 이용한 수심측정은 활용성이 있는 것으로 나타났다. 하지만 해저표면의 형태와 해수면의 상태 등 수심측정에 미치는 영향에 관한 실측데이터에 대한 자료수집과 분석이 선행된다면 더욱 좋은 결과를 도출할 수 있을 것으로 판단된다.A}$는 최대암모니아 섭취률을 이용하여 구한 결과 $0.65d^{-1}$로 나타났다.EX>$60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수

• Journal of Korean Society of Transportation
• /
• v.36 no.1
• /
• pp.23-37
• /
• 2018

In recent years, it is very difficult to construct and expand new infrastructures in a city center because of long-term low growth and lack of space due to urban overcrowding. So, there is a need to study a variety of Retrofitting techniques and urban applications that can lead to sustainable development while efficiently utilizing existing facilities. 'Retrofit' means a sustainable urban retrofitting as a directed alteration of the structures, formations and systems of existing facilities to improve energy, water and waste efficiencies. In this study, we applied a hierarchical network design technique that can reflect the structural hierarchy of a city to study how to retrofit public transportation routes in Seoul. The hierarchical network design means dividing the hierarchy according to the functions of hubs and connecting different hierarchies to form a hierarchical network. As a result of comparing the application results of various retrofitting scenarios of public transport, the differences of daily PKT and PHT by about 2.6~3.2% less than before the improvement address that the convenience of passengers is increased. Therefore, it is expected that if the route planning is established according to the proposed method, it will increase the number of passengers and the operational efficiency by the improved convenience of public transit passengers.