• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.391-398
• /
• 2003

Distraction osteogenesis is a well-estabilished procedure of membraneous bone formation and has been used to correct craniofacial deformities in dentofacial orthopedic-surgery area for decades. In this articale, distraction osteogenesis is used for treatment of facial asymmetry. The patient underwent procedures to lengthen the mandibular ramus and body. After distraction, orthodontic treatment was done for ooclusal settling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1273-1281
• /
• 2014

Tissue engineering is an emerging research field that has the potential to restore, regenerate and repair damaged bone tissue and organs. Tricalcium phosphate and hydroxyapatite biomaterials-based calcium phosphate are excellent materials that have both osteoconduction and biocompatibility for bone tissue regeneration. In this study, solution structures were successfully fabricated using a fused deposition modeling system based on deposition and heating devices. The morphology characteristics of the bioceramic scaffolds sintered at a temperature of $1,300^{\circ}C$ were analyzed by scanning electron microscopy. The effects of various blended TCP/HA ratio on the microstructure and shrinkage were studied. The mechanical properties of the scaffolds were measured using a compression testing machine from stress-strain curves on the crosshead velocity of 1 mm/min. The fabricated scaffolds were evaluated by cell proliferation tests of MG-63 cells. The results of this study suggest that the blended TCP(75 wt%)/HA(25 wt%) scaffold is an appropriate scaffold for bone tissue regeneration.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.73-73
• /
• 2018

조직재생공학은 조직이나 장기를 재생하고 유지하는 데 초점을 맞춘 종합 분야이다. 세포담체는 세포가 조직이나 장기로 발달 할 수 있도록 결정적인 역할을 한다. 따라서 공극률, 기공 크기, 기공 상호 연결성, 표면 거칠기, 기계적 강도 및 기하학과 같은 기본 요구 사항들은 중요한 특성으로 간주된다. Particle leaching, phase separation, solvent casting, gas foaming, selective laser sintering, fused deposition 및 3D dispensing (printing)과 같은 다양한 Rapid Prototyping 방법이 세포담체 제조에 사용되었다. 또한, 다양한 천연 및 합성 고분자가 세포담체를 제조하는데 사용되어왔다. 본 연구에서는 기존의 3D 프린팅 방법과 플라즈마 에칭 공정을 이용하여 나노 에칭 된 나선형 가닥으로 구성된 3 차원 세포담체를 제작 하였다. 제작 된 세포담체의 물리적 및 생물학적 성질을 비교 연구하기 위해, 본 연구에서는 매끄러운 가닥을 대조물로 사용하였다. 나노 에칭된 표면은 초기 세포 부착, 증식 및 골 형성 분화와 같은 세포 활동에 영향을 미쳤다.

• The Journal of the Korean bone and joint tumor society
• /
• v.17 no.2
• /
• pp.65-72
• /
• 2011

Purpose: We evaluated the complications of allograft reconstruction after a bone tumor resection, and reviewed literatures to overcome such complications. Materials and Methods: We retrospectively reviewed clinical records and radiographs of fifteen patients in whom reconstruction with allograft after bone tumor resection. Results: Eight patients were men and seven were women with a mean age of 27.1 years (1-56 years) and a mean follow-up period of 89.5 months (33-165 months). All postoperative complications related to the allograft were recorded. Twenty patients (80.0%) obtained a radiologic bony union at a mean of 8.35 months (4-12 months). The mean Musculoskeletal Tumor Society score was 73.5% (46.6-93.0%). Nine patients (60.0%) experienced one event and 3 (20.0%) patients experienced multiple events during the follow-up period. Recorded events were infection (3), fracture (2), nonunion (2), limb length discrepancy (2) and varus deformity (2). The mean event free survival period was 60.8 months (6-144 months). The mean allograft survival period was 80.2 months and the 5 year survival rate of the allografts was 83.0%. Conclusion: In order to overcome complications, the combination of an allograft and vascularized fibular graft is highly recommended. In the near future, the tissue engineering technique, the application of the stem cell and PRP, could reduce the complication of allograft such as resorption and nonunion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1153-1159
• /
• 2015

Recently, synthetic biopolymers and bioceramics such as poly (${\varepsilon}$-caprolactone)(PCL), hydroxyapatite, tricalcium phosphate, biphasic calcium phosphate(BCP), and zirconia have been used as substrates to generate various tissues or organs in tissue engineering. Thus, the purpose of this study was the characterization of $ZrO_2$/BCP/PCL(ZBP) scaffold for bone tissue regeneration. Based on the result of single-line test, blended 3D ZBP scaffolds with fully interconnected pores and new complex pore pattern of $45^{\circ}+135^{\circ}$-type and staggered-type were successfully fabricated using a polymer deposition system. Furthermore, the effect of ZBP scaffold on mechanical property was analyzed. In addition, in vitro cell interaction of ZBP scaffold on MG63 cells was evaluated using a cell counting kit-8(CCK-8) assay.

• Journal of Biosystems Engineering
• /
• v.29 no.5 s.106
• /
• pp.457-466
• /
• 2004

Novel porous composite ceramic bone scaffolds composed of biodegradable PHBV(polyhydroxybutyrate-co-hydroxyvalerate) and TA(toothapatite) have been fabricated for bone tissue engineering by a modified solvent casting and particulate leach-ing method with salt-contained heat compression technique. The results of this study suggest that the PHBV-TA composite scaffold, especially the scaffold containing 30 weight$\%$ of TA may be a good candidate far bone tissue engineering of non-load bearing area in oral and maxillofacial region.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.42.1-42.1
• /
• 2010

Poly-carprolactone (PCL)은 생분해성 고분자로 장기간의 임상실험 결과 생체에 독성이 없으며 생체친화성이 우수한 소재로 확인되어 PLGA, PLLA 등과 더불어 조직공학 분야에서 널리 사용되고 있는 생체재료이다. 그러나 PCL은 5개의 비극성 methylene group과 1개의 극성 ester group이 반복되는 지방족의 polyester로 구조상 탄소수가 많아 소수성을 띄는 단점을 가지고 있다. 이러한 표면이 소수성인 재료의 경우, 초기 단백질 흡착능이 떨어져 세포의 부착이 느린 속도로 일어나므로 세포 분화 및 조직 재생이 더디게 일어난다. 본 연구에서는 소수성의 PCL 표면의 단백질 흡착능을 증가시키기 위해 기능성 amine group을 부착하였으며, 또한 골재생을 촉진시킬 수 있는 세포외 기질인 collagen과 osteopontin을 부착함으로써 고기능성 PCL membrane을 제조하였다. 제조된 PCL membrane은 골재생용 조직공학에의 응용을 위해 지방유래 줄기세포를 이용하여 부착능 및 골세포로의 분화능을 확인하였다. 표면 성질의 변화에 의한 세포의 부착능의 변화를 confocal microscopy을 이용하여 부착에 관여하는 단백질의 발현을 확인하였으며, collagen과 osteopontin에 의한 골세포로의 분화능을 확인하기 위해 real time PCR을 통해 골세포의 분화 표지 유전자의 발현을 비교 분석하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.108-108
• /
• 2017

다양한 생체 재료들을 이용한 마이크로 및 나노 크기의 표면 구조 모사는 조직공학에서 세포의 성장 및 분화에 영향을 미치는 것으로 알려져 있다. 특히, 마이크로-나노 구조가 공존하는 계층적 표면 구조는 골 아세포의 증식과 분화에 탁월하여 뼈 조직 재생에 응용되어 왔다. 기존에는 화학적 처리 기법을 이용하여 마이크로 표면 구조가 제작 되었으나 미세 거칠기 및 계층적 표면 구조의 제어가 어려웠다. 현재 이러한 문제점들을 극복하기 위해 플라즈마를 이용한 애칭 기법이 주로 이용되고 있으나 높은 온도 공정 환경에 의한 재료 선택의 한계점 및 오랜 공정 시간에 의한 플라즈마 처리 효율이 감소되어 원하는 표면구조 및 거칠기를 얻을 수 없다는 단점이 있다. 본 연구에서는 이러한 문제점들을 극복하기 위해 마이크로/나노 주조 기법 이용하여 생체적합성 합성고분자 poly(${\varepsilon}$-caprolactone) (PCL) 위에 연꽃잎 구조를 모사한 후 플라즈마 애칭 기법을 이용하여 마이크로-($3.01-3.07{\mu}m$)와 나노크기 ($97{\pm}16nm$)를 동시에 갖는 계층적 구조를 제작하였다. 제작된 구조의 효능을 관찰하기 위해 조골세포를 배양한 결과 평평한 PCL 구조보다 제작된 계층적 구조가 높은 세포성장률 (>2.9배)및 세포 분화도(>2.1배)를 보였다. 이러한 결과는 새로운 표면 공학적 모델로서 손상된 뼈 및 치아조직 재생을 위한 적합한 거칠기 및 표면적인 환경을 제공해 빠른 재생 능력과 더불어 치료기간의 단축을 가져 올 수 있을 것으로 사료된다.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.196-201
• /
• 2006

Poly (ethylene glycol)-based diblock and triblock thermo- sensitive polyester copolymers were investigated for application on tissue engineering and injectable biomaterials in drug delivery system due to their nontoxicity, biocompatibility and biodegradability. We synthesized the diblock copolymers consisting of methoxy poly (ethylene glycol) (MPEG) (Mn=750 g/mole) and poly $(\varepsilon-caprolactone)$ (PCL) by ring opening polymerization of $\varepsilon-CL$ with MPEG as an initiator in the presence of HCl $Et_2O$. The effect of diblock copolymers on in vivo osteogenic differentiation of rat bone marrow stromal cells (BMSCS) with and without the presence of osteogenic supplements (dexamethasone) was investigated. Thin sections were cut from paraffin embedded tissues and histological sections were stained by H&E, von Kossa, and immunohistochemical staining for osteocalcin. In conclusion, dexamethasone containing thermo- sensitive hydrogel might be improved osteogenic differentiation of BMSCs. We expect the osteoinduction effect to be excellent when it uses stem cell or other osteogenic materials.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.371-377
• /
• 2014

In tissue engineering, a scaffold is a three-dimensional(3D) structure that serves as a template for regeneration the functions of damaged tissues or organs. Among materials for scaffolds, polycaprolactone(PCL) and ${\beta}$-tricalcium phosphate(${\beta}$-TCP) are biodegradable and biocompatible. In this study, we fabricated 3D PCL, blended PCL (60 wt %)/${\beta}$-TCP (40 wt %), and pure ${\beta}$-TCP scaffolds by a multi-head scaffold fabrication system. Scaffolds with a pore size of $600{\pm}20{\mu}m$ was observed by scanning electron microscopy. The effects of 3D PCL, blended PCL (60 wt %)/${\beta}$-TCP (40 wt %) and pure ${\beta}$-TCP scaffolds were analyzed by evaluating their mechanical characteristics. In addition, in an in-vitro study using osteoblast-like saos-2 cells, we confirmed the effects of 3D scaffolds on cellular behaviors such as cell adhesion and proliferation. In summary, the 3D blended PCL (60 wt %)/${\beta}$-TCP (40 wt %) scaffold was found to be suitable for human cancellous bone in terms of its the compressive strength, biocompatibility, and osteoconductivity. Thus, blending PCL and ${\beta}$-TCP could be a promising approach for fabricating 3D scaffolds for effective bone regeneration.