• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2022

In this study, the mechanical properties of concrete with recycled coarse aggregate (RG) selected by multi-stage wind pressure (MSWP) treatment were evaluated. After evaluating the basic properties of natural and recycled coarse aggregates, the mechanical performance of the recycled coarse aggregates concrete was experimentally investigated. As a result, it was found that the MSWP technique could improve the fundamental properties such as density and water absorption of RG. In addition, the concrete with RG selected by MSWP showed a better mechanical performance, indicating a higher strength values, surface electric resistivity and a lower absorption. Thus, it seems that the MSWP technique can be effective for the production of high-quality RG.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.2
• /
• pp.171-179
• /
• 2015

Recently, development of substitution aggregate is urgently needed because aggregate shortage is continuing due to the exhaustion of natural aggregate and strict restrictions of environment in construction industry. Therefore, In this study, new processing method to solve the problems of processing method of existing converter slag, namely, rapid cooling slag produced by the rapid cooling and crushing process of the high temperature melten slag into the rotary drum and then using the cooling water, compressed air and steel ball was examined fundamental properties for utilize as fine aggregate for concrete. In addition, through this study, we propose the utilization method of rapid cooling slag as fine aggregate for concrete.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.246-252
• /
• 2021

The basic properties and volume stability of the ultra-rapid setting cement mortar containing low-quality recycled aggregate with a higher water absorption and lower specific gravity than relavent Korea Standard were experimentally confirmed. The mix proportion without recycled aggregate followed that of the general repair mortar used in the fields. 15% and 30% of the fine aggregate was substituted by the recycled aggregate in the mixtures with and without latex emulsion, and properties and characteristics of the mortar including mortar flow, setting time, compressive and flexural strength, and linear deformation under sealed and unsealed conditions were evaluated. It was confirmed that when low-quality recycled aggregate was used by 30%, there were risks of decrease in the early-age strength by up to 50% within 24h and increases in drying shrinkage by up to 2 times for 2 weeks compared to the the mixtures without the recycled aggregate.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.321-326
• /
• 2022

In this study, cogeneration power plants that use biomass as a raw material to convert them into energy have recently received a lot of attention worldwide and are gradually increasing in South Korea. Therefore, in order to confirm the possibility of using the generated floor material as a fine aggregate for concrete, properties and stability evaluation experiments were performed. Compared to standard sand, the compressive strength of wood chip aggregate was improved by 11 % to 111 %, the length change rate was 89 %, and the waste processing test results met all criteria for hazardous substances. All of these are satisfied, and it is judged that the floor materials by the cogeneration power plant can be used as a fine aggregate for concrete.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.499-506
• /
• 2017

This study is to present empirical data about the needs for quality security of aggregate by randomly selecting aggregate from 4 major locations including A, B, C, D province in Korea, by investigating its quality status in terms of physical properties and particle distribution based on Korean industrial standards(KS). The test results indicated that wide variance in quality, and some of aggregate samples were far below the standard, still many of them are not satisfying KS standards. In addition, the current aggregate manufacturing process that does not include inspection of particle size distribution by sieving and fineness modulus, can induce a possibility of non-KS aggregate's distribution; this provide that the current status of aggregate quality security of Korea is seriously threatened. Thus, it is important to secure each aggregate's quality level under KS standards.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.315-320
• /
• 1998

최근에 도시의 재개발계획 및 도시환경정비 등에 의해 해체되는 구조물이 증가하여 폐콘크리트의 발생량은 증가하고 있어, 이를 이용한 재생골재의 재활용이 필요한 실정이다. 그러나, 현재 생산되고 있는 재생골재는 기초적 물성이 천연골재와 비교하여 상대적으로 열악하여 이를 이용한 재생콘크리트는 일반 골재를 사용한 콘크리트에 비하여 시공성 및 굳은 콘크리트의 공학적 특성 및 내구성 저하에 대한 우려로 건설구조재료로서의 사회적인 신뢰도가 낮은 실정이다. (중략)

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.335-336
• /
• 2009

In this study, the properties of lightweight concrete which is beneficial to cost and technique by reducing self weight of structure member was carried out basic research. The unit weight, compressive strength, splitting tensile strength test have been conducted with producting plain concrete, lightweight aggregate concrete type I and type II to check the basic properties. The compressive strength of 21MPa was obtained easily by using lightweight aggregate concrete and addition of silica fume increase the compressive strength slightly. To use lightweight aggregate concrete for civil engineering structure, systematic and rigorous studies are necessary.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.251-252
• /
• 2010

In this study, the basic properties of high performance concrete, to used oxidized electric-furnace-slag(EFS) aggregate, were examined. So we presented the possibility of using ㄸ EFS as concrete's aggregate.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.79-87
• /
• 2012

Recently, Development of substitution aggregate is urgently needed because aggregate shortage is continuing due to the exhaustion of natural aggregate and strict restrictions of environment in construction industry. Therefore, This paper was examined the fundamental properties for application of FINEX slag by finex process as fine aggregate for concrete. Through this study, we propose the practical method of FINEX slag as fine aggregate for concrete.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.345-358
• /
• 2003

Recently, the reuse of coarse aggregate derived from demolished concrete was introduced into practice with two environmental aspects: protection of natural sources of aggregate and recycling of construction waste. However, recycled aggregate has been used for the very limited application such as subbase material for pavement and constructional filling material because it was considered as low quality constructional materials. In the present study, in order to examine the possibility that recycled aggregate can be used for concrete mixing, we conducted various experimental tests to identify mineralogical, chemical and mechanical properties of recycled aggregate and to determine the workability and mechanical properties of recycled aggregate concrete (RAC). The cement paste and mortar contained in recycled aggregate significantly affect the basic mechanical properties of aggregate and the workability and mechanical properties of RAC. However, RCA mixed with the proper replacement ratio of recycled aggregate shows the comparable compressive strength and freeze and thaw resistance to those of normal concrete. Therefore, it is considered that recycled aggregate can be widely used for concrete if the cement paste and mortar can be efficiently removed from recycled aggregate and/or if the effective replacement ratios of recycled aggregate are applied for mixing concrete.