• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.908-914
• /
• 2013

A shaped Cassegrain antenna is designed from the condition of the same path length at the equi-phase surface by using the conservation of energy and Snell's law. In order to improve the phase error efficiency of aperture surface, the surface profile of the main and sub-reflectors is found to satisfy the power distribution and the equi-phase condition at the aperture surface. The sidelobe levels of 36.4 dB and 33.9 dB are achieved at the AZ and EL planes, respectively from numerical calculation by physical optics method at Ku band and the directivity of designed antenna is 10 percent greater than that of conventional antenna.

• Journal of the Korea Computer Graphics Society
• /
• v.11 no.2
• /
• pp.40-46
• /
• 2005

본 논문에서는 스윕곡면(sweep surface)을 기반으로 복잡한 3차원 물체의 형상을 변형하는 새로운 자유형상 변형(free-form deformation)기법을 제시한다. 본 논문에서 제시한 방법은 기존의 격자점(control lattices)을 조정하는 체적기반의 방법에 비해 스윕기반의 절차적 (procedural) 모델링 기법의 직관성을 활용하여 사용자에게 보다 효율적인 형상변형 기법을 제공한다. 3차원 물체의 정점들은 스윕곡면의 단면(cross-section)에 바인딩(binding) 되어 곡면의 변화에 따라 형상변형을 한다. 본 논문에서 제시한 스윕기반 형상변형 기법은 3차원 물체를 부분적으로 변형하는 기법과 계층구조를 기반으로 전반적인 형상을 변형하는 기법으로 구분된다. 부분적인 형상변형 기법은 스윕곡면을 구성하는 성분의 다단계(multi-level) 표현을 통하여 사용자에게 다중해상도(multi-resolution) 형상변형 기능을 제공한다. 계층구조에 기반한 형상변형 기법은 복잡한 3차원 물체를 위상구조에 따라 여러 계층으로 분할하고, 각 부분의 형상을 근사하는 스윕곡면들을 생성한다. 분할된 각 부분의 정점(vertices)들은 해당 스윕곡면에 바인딩 되어 스윕곡면의 단면의 변화를 따르게 된다. 이러한 상황하에서 스윕곡면들은 3차원 물체의 계층구조에 따라서 서로 상호작용(interaction)을 하게 되고, 결과적으로 3차원 물체의 각부분은 상호반응적 형상변형을 한다. 이러한 계층구조에 기반한 상호반응적 형상변형 기법은 사용자의 의도에 부합하는 보다 사실적이고 기능적인 형상변형을 가능하게 한다. 본 논문에서는 다양한 3차원 물체에 대한 실험을 통해 제시된 방법의 효율성을 입증한다. 결과 막성 사구체병증과 같은 신질환이 발견될 수 있으므로 신조직검사의 적응증에 합당한 경우 적극적인 신조직검사를 시행하여 원인 질환을 찾는 노력이 필요할 것으로 사료된다.. 남아가 75명으로 남녀비는 3.6:1을 보였다. 임상병리학적 분류상 일차성 신증후군이 89명(92.7%), 이차성 신증후군이 7명(7.3%)이었으며 일차성 신증후군에서 minimal change nephrotic syndrome이 71명으로 79.8%, focal segmental glomerulosclerosis 11.2%, mesangial proliferation 4.5%, membranoprolifrative glomeulonephritis 3.4%, membranous nephropathy 1명 1.1%이었으며 2차성 신증후군은 $Henoch-Sch\"{o}nlein$ nephritis가 3례로 가장 많았다. 미세변화 신증후군 71명 중 비재발군이 16명으로 22.5%, 비빈발 재발군 49.3%, 빈발 재발군 18.3%, 스테로이드 의존군 9.9%를 보였다. 결론 : 대전시에서의 신증후군 환아의 발생빈도는 15세이하 소아 10만명당 약 5명으로 추정되었으며 10여 년전과 비교하여 큰 변화를 보이지는 않았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.1051-1057
• /
• 2013

In this study, an automatic surface-strain measurement system called "ASIAS-bio" has been developed. This system can be used even in cases in which it is very difficult to apply a regular grid pattern necessary for measuring surface-strain, such as curved or uneven surfaces; surfaces damaged by corrosion or contamination; or soft materials such as rubber, foam, and biological tissues. This system works independently of the measurement conditions including the material and its surface condition, grid pattern and size, grid marking method, and degree of deformation. A comparison between the strain distributions of the sheet metal parts measured by using this system and those obtained by a commercial system showed that this system was sufficiently reliable. In addition, the deformation of the swine joint capsule and human knee skin was measured by using this system to demonstrate its usefulness.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.2
• /
• pp.35-44
• /
• 2022

In this paper, we propose an intra-picture prediction method by a quadratic surface modeling method for depth video coding. The pixels of depth video are transformed to 3D coordinates using distance information. A quadratic surface with the smallest error is found by least square method for reference pixels. The reference pixel can be either the upper pixels or the left pixels. In the intra prediction using the quadratic surface, two predcition values are computed for one pixel. Two errors are computed as the square sums of differences between each prediction values and the pixel values of the reference pixels. The pixel sof the block are predicted by the reference pixels and prediction method that they have the lowest error. Comparing with the-state-of-art video coding method, simulation results show that the distortion and the bit rate are improved by up to 5.16% and 5.12%, respectively.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1851-1855
• /
• 2011

The accuracy of wheel-rail contact analysis is mainly determined by the methods to find wheel-rail contact points and to calculate contact forces. The 2-dimensional approach which calculates contact points based on the profile curves of the wheel and rail has advantage of reducing calculation time but shortage of approximating the solutions when comparing with 3-dimensional analysis In this analysis, wheelset dynamic behaviors calculated by the approach based on the 2-dimensional wheel-rail curves are compared with those by the 3-dimensional wheel-rail surfaces. Yaw angle and lateral displacement of wheelset center are compared when negotiating a curve.

• The KIPS Transactions:PartB
• /
• v.18B no.3
• /
• pp.131-138
• /
• 2011

In this paper, we compare our proposed method with previous methods for the volumetric image segmentation using level set. In order to obtain an exact segmentation, the region and boundary information of image object are used in our proposed speed function. The boundary information is defined by the gradient vector flow obtained from the gradient images and the region information is defined by Gaussian distribution information of pixel intensity in a region-of-interest for image segmentation. Also the regular term is used to remove the noise around surface. We show various experimental results of real medical volume images to verify the superiority of proposed method.

• Journal of the Korean Society of Radiology
• /
• v.13 no.1
• /
• pp.119-124
• /
• 2019

Radiation therapy using flattening filter free beam can prevent beam attenuation caused by flattening filter and can improve treatment efficiency. However, accurate dose control is not established for nonuniform iso dose distributions. In this study, curved dosimeter based on photoconductive material $HgI_2$ was fabricated and its reproducibility and linearity were evaluated at 6 MV photon energy to verify its performance. In order to show the usefulness of the curved measurement, the signals measured on the flat substrate and the curved substrate were compared in the flattening filter free beam using the acrylic filter. As a result, the reproducibility of the unit cell dosimeter was evaluated as SE 0.613%, and the linearity was evaluated as R-sq 0.9999. The usability evaluation of the array curve dosimeter demonstrated its usefulness by indicating a curvature error rate of 11.073%p and a reduced error rate.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.4
• /
• pp.78-86
• /
• 2011

The recovering of historical mountain fortress needs the maintenance of forest scape for achieving visibility. In the study, the methods for the maintenance of the forest around the fortress were proposed. The Cumulative Visibility Analysis and Multiple Sight Surface Analysis were tested to verify the methods using GIS on the Myeong-hwal Fortress in Kyungju. The results of the study are as follows. First, the Cumulative Visibility Analysis was made on the Myeong-hwal Fortress from surrounding major viewpoints. The Cumulative Visibility Analysis enables the selection of excellent visibility sectors on the fortress. The 6 excellent visibility sectors were 1,937m(which occupied 41.2% of the area). Second, two cases of pine tree height were compared in the Cumulative Visibility Analysis. One used the average height of pines and the other used the maximum growth height. The comparative result demonstrated that the case of average height would be more effective for deciding the pine removal zone as well as achieving visibility to the mountain fortress. Third, to examine the feasibility of the management method, the tree removal plan and removal execution were compared on the A zone which showed high visibility frequency. Asa comparative result, there was insignificant difference(3.3%) in area between the tree removal plan($10,935m^2$) and removal execution($11,296m^2$). This study proved the Cumulative Visibility Analysis and Multiple Sight Surface Analysis to be effective for forest scape maintenance around a mountain fortress.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.85-89
• /
• 1997

The development of the algorithm and the computer aided marking data generation system based on it should precede the automation system for plate forming by line heating method. This paper places emphasis on the yard simulation for a real surface model to justify the algorithm and the computer aided marking data generation system which have been already developed. The yard simulation has been carried out according to the generated marking data and the heating condition produced by the developed computer aided system. The practical applicability of the developed computer aided system has been conformed by comparing the results of the computer simulation to the results of the yard simulation. This paper ends with the extension of the developed marking data generation system.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.570-578
• /
• 2007

선체 외판 부재의 곡 성형 과정은 주로 가열(열간가공)에 의해 수행된다. 이 가열 작업은 작업자의 경험과 지식에 크게 의존하는 매우 어려운 작업이다. 본 논문에서는 선체 외판의 곡 성형을 위한 가열 계획을 자동으로 수립할 수 있는 휴리스틱을 소개한다. 현장 전문가의 지식에 기반한 이 휴리스틱은 크게 가열 선을 생성하는 부분과 외력을 주는 도구를 배치하는 부분으로 구성된다. 가열 선은 대상 부재의 현재 곡면과 설계된 목적곡면과의 비교를 통해 생성되고, 가우스 커널 함수를 통해 스무딩(smoothing)된다. 현장에서는 열간가공 시 의도하지 않은 변형을 막으면서 작업시간을 줄이고자 외력을 이용한다. 외력의 위치와 방향은 가열 선 군집화를 통해 추출된 대표 가열 선을 기준으로 결정된다. 가상의 인공 곡면과 현장의 실제 부재를 대상으로 실험한 결과, 이 휴리스틱이 숙련된 전문가가 수립한 가열 계획과 유사한 가열 계획을 수립할 수 있음을 확인하였다.