• Title/Summary/Keyword: 고 장(古裝)

Search Result 21, Processing Time 0.033 seconds

A Study on Design Techniques for Over-head Distribution Lines in a Long Span (장경간 가공배전선로 설계방안 연구)

  • Wong, Yoon-Chan;Sun, Sang-Jin;Kim, Sang-Kyu;Kim, Chang-Wan
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.2224-2225
    • /
    • 2008
  • 가공배전선로는 야외에 시설됨에 따라 태풍과 같은 자연재해로 인한 전기고장 및 설비피해가 발생하기 쉽다. 그러나 이와 관련한 연구들이 이론적인 부분에만 치우쳐 장경간 가공배전선로의 설계 시 어떤 순서로 무엇을 검토해야하는지 알기가 어려웠다. 따라서 본 고에서는 장경간 가공배전선로 설계시 전선종류, 장주형태, 완철간 수직이격거리 및 지지물 길이를 결정하는 방법에 대하여 연구한 결과를 사례를 통해 설명하였다. 본 고에서 제시한 방법에 따라 설계를 시행한다면 장경간 가공배전선의 선간단락고장을 예방할 수 있을 뿐만 아니라, 홍수 시에도 수면으로부터 충분한 지상고 유지를 위하 고장 및 설비피해를 예방할 수 있을 것으로 기대된다.

  • PDF

A research on air-gap flux characteristics caused by a short-circuit at rotor windings (회전자권선 단락에 의한 소용량 동기발전기의 공극자속파형 특성 연구)

  • Kim, Dong-Hun;Song, Myung-Kon;Kim, Tae-Young;Park, Sang-Bae
    • Proceedings of the KIEE Conference
    • /
    • 2006.10d
    • /
    • pp.31-33
    • /
    • 2006
  • 전력수요의 증가에 대하여 전력을 공급하는 발전기의 대용량화, 고전압화 소형경량화 됨에 따라 발전기 고장 예방을 위한 진단이 더욱더 중요시되고 있다. 이들 발전기의 전기적 고장의 대부분은 고정자 및 회전자 권선에서 발생하며 이의 고장을 복구하는데 장시간이 요구되므로, 발전기의 예측진단에 따른 정비와 더불어 고장을 미연에 발견하고 불시정지에 따른 파급을 막기 위해서는 상시감시가 요구된다. 본 연구에서는 소용량 동기발전기를 이용하여 발전기 회전자권선의 단락 고장진단을 위한 공극에서의 자속패턴을 상용 전자장해석 전문프로그램을 이용하여 수치적으로 계산하여 도출하였으며, 또한 실제 회전자 권선 단락 실험을 통하여 실제 공극에서의 자속패턴과 전자장 해석결과와 비교를 하여 전자장 해석결과의 신뢰성을 확보 하였다.

  • PDF

RAID Parity Declustering using Distributed sparing (분산 스페어 디스크를 이용한 RAID 패리티 디클러스터링 방법)

  • 백운천;장태무
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 1999.10c
    • /
    • pp.27-29
    • /
    • 1999
  • RAID는 고병렬성과 고가용성을 목표로 제안된 대용량 저장 수단이다. 패리티 디클러스터링을 이용한 RAID는 특히 고장이 발생한 경우에도 성능의 저하를 최소화하여 고가용성을 갖는 저장장치를 구축할 수 있는 기법이다. 본 논문에서는 이러한 패리티 디클러스터링을 사용한 RAID에 스페어 유닛을 분산시킨 구성을 제안하고, 특히 이러한 분산 스페어링이 고장이 없는 정상 상태에서도 성능 개선에 유용함을 보인다. 본 논문의 실험 결과는 시뮬레이션 방식으로 입증하였으며, 전반적으로 정상상태의 성능을 5-15% 정도 높일 수 있음을 알 수 있다.

  • PDF

A New Test Algorithm for Effective Interconnect Testing Among SoC IPs (SoC IP 간의 효과적인 연결 테스트를 위한 알고리듬 개발)

  • 김용준;강성호
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.40 no.1
    • /
    • pp.61-71
    • /
    • 2003
  • Interconnect test for highly integrated environments like SoC, becomes more important as the complexity of a circuit increases. This importance is from two facts, test time and complete diagnosis. Since the interconnect test between IPs is based on the scan technology such as IEEE1149.1 and IEEE P1500, it takes long test time to apply test vectors serially through a long scan chain. Complete diagnosis is another important issue because a defect on interconnects are shown as a defect on a chip. But generally, interconnect test algorithms that need the short test time can not do complete diagnosis and algorithms that perform complete diagnosis need long test time. A new interconnect test algorithm is developed. The new algorithm can provide a complete diagnosis for all faults with shorter test length compared to the previous algorithms.

A Study on the Fault Recovery Method in Multi-Layered Service Middleware for Unmanned System (무인체계를 위한 다계층 서비스 미들웨어에서의 서비스 단위의 고장복구 방안 연구)

  • Chang, Hye-Min;Chu, Jeung-Ho;Park, Won-Ik;Kim, Do-Jong
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2012.11a
    • /
    • pp.293-294
    • /
    • 2012
  • 실시간으로 고장모듈을 교체하기 어려운 대다수의 군용 시스템에서 고장상황시 고장 모듈을 대체하기 위하여 동일 모듈의 중복운용 방식은 대다수의 시스템에서 사용되고 있다. 본 논문에서는 서비스 단위로 중복운용되는 무인체계 다계층 서비스 미들웨어에서의 고장복구 방법을 제안하고자 한다. 운용 상태 설정 정보에 따라 정상운용되는 미들웨어 시스템은 고장발생시 고장감지 흐름에 의해 고장을 판단하고, 고장복구 흐름에 따라 고장상황을 복구한다. 이를 통하여 이기종의 분산환경 상에서 예기치못한 시스템의 오동작이나 비가용 시에도 서비스 단위의 고장복구를 통한 가용성 증대 및 시스템 전체의 고신뢰성 목표수준을 충족시킬 수 있다.

A Study on the Digital Protective Relay for Generator Fault Protection (발전기 고장보호를 위한 디지털 계전기에 관한 연구)

  • Jang, Nak-Won;Park, Jeong-Do;Lee, Sung-Hwan
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.33 no.8
    • /
    • pp.1232-1238
    • /
    • 2009
  • As power facilities are getting higher at capacity, the monitoring and diagnosis of generators for fault detection and protection has attracted intensive interest. In case of an after-fault in high capacity rotating machines, the recovering cost is usually very expensive and additional time is necessary for returning in a normal situation. In this paper, we developed the protection program for the generator fault protection system and each module of the digital protective relay H/W for loading the protection program. The protective relay H/W was designed to have EMC characteristics for prohibiting from fault operation in bad power systems.

Fault diagnosis system of the short circuit conditions in windings for synchronous generator (동기발전기 권선단락사고 고장진단 시스템)

  • Jang, Nakwon;Lee, SungHwan
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.37 no.5
    • /
    • pp.520-526
    • /
    • 2013
  • As the increasing of capacity and technology of power facilities, rotating machines are getting higher at capacity and voltage scale. Thus the monitoring and diagnosis of generators for fault detection has attracted intensive interest. In this paper, we developed fault diagnosis system for monitoring the fault operations in bad power systems. In order to verify the performance of this fault diagnosis system, we made the small scaled testing system which has the same winding structure of the real synchronous generator. The magnetic flux patterns in air-gap of a small-scale generator under various fault states as well as a normal state are tested by hall sensors and the fault detection system.

A Study on Design Techniques for Span Length and Guy Wire Strength in Straight Over-head Distribution Lines (직선 가공배전선로 경간 및 지선강도 설계방안 연구)

  • Wong, Yoon-Chan;Sun, Sang-Jin;Kim, Sang-Kyu;Kim, Chang-Wan
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.2226-2227
    • /
    • 2008
  • 가공배전선로는 태풍과 같은 자연재해에 상시 노출되어 시설되므로 전기고장 및 설비피해가 발생할 우려가 매우 높다. 그러나 이와 관련한 실질적인 연구들이 부족하여 가공배전선로의 설계원들이 직선선로의 경간 결정시 단순히 저압부하밀도 및 전주강도만을 고려하고 있으며, 인류지선 및 종지선의 규격 선정방법을 잘 이해하지 못함에 따라 규격 선정의 오류가 발생되기도 한다. 따라서 본 고에서는 그 동안의 연구결과를 바탕으로 가공배전선로 설계시 수평선간이격거리를 고려한 경간 결정방법과 장경간 및 표준경간의 인류지선, 장경간개소 종지선 결정방법에 대하여 사례를 통해서 설명하였다. 본 고에서 제시한 방법에 따라 설계검토를 시행한다면 표준경간에서 선간단락고장을 예방할 수 있을 뿐만 아니라, 장경간 및 표준경간의 인류지선 및 종지선의 강도가 재해시에도 충분한 강도를 확보하여 설비피해 및 전기고장을 예방할 수 있을 것으로 기대된다.

  • PDF

Performance Improvement on RAID System with Parity Declustering (패리티 디틀러스터링 RAID 시스템에서의 성능 개선 방안)

  • Chang, Tae-Mu
    • The Transactions of the Korea Information Processing Society
    • /
    • v.7 no.2
    • /
    • pp.497-506
    • /
    • 2000
  • RAID systems have been used as a mass storage system with high parallelism and availability. Especially RAID systems with parity declustering are widely studied as a technique to provide high fault tolerancy and availability by reducing performance degradation in case of disk fuilures. In this paper, a new organization of parity declustering with distributed spare units is proposed. And in normal mode where there are no failures, it is shown that these organization can improve the performance of RAID systems. By simulation methods, it is proved that the performance of RAID system in normal mode is improved by 5 to 15%.

  • PDF

유압펌프의 무고장 가속시험 전략

  • Jeong, Dong-Su;Lee, Yong-Beom;Seong, Baek-Ju
    • 기계와재료
    • /
    • v.22 no.4
    • /
    • pp.68-74
    • /
    • 2010
  • 현장 운용조건하에서 사용자들이 요구하는 보증수명을 시험평가하기 위해서는 많은 시간과 비용이 소요된다. 이를 해결하기 위한 시험기술로써 흔히 가속시험이 운용되며 가속방법에는 연속적으로 사용하지 않는 제품을 연속적으로 가동시킴으로써 고장시간을 단축시키는 사용를 가속과 사용조건보다 높은 스트레스를 부과하여 제품의 수명을 단축시키는 고 스트레스 가속이 있다. 기계류 부품들에서 대부분 채택하고 있는 고 스트레스 가속방법을 적용한 무고장 가속시험의 전략은 크게 현장 운영조건하에서의 등가부하를 산출, 시험 운영조건하에서의 등가부하를 산출 그리고 보증수명에 의한 무고장 시험시간을 산출하는 3가지의 기술로 운영된다. 이러한 가속시험 전략은 기계류에 관련된 대부분의 부품 및 시스템에 적용 및 활용이 가능하다.

  • PDF