• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.549-556
• /
• 2005

Response surface methodology (RSM) was applied in steaming and roasting processes of Polygonatum odoratum roots in order to monitor hypoglycemic components and sensory property. In steaming and roasting processes based on the central composite design with variations in steaming time $(60\~180\;min)$, roasting temperature $(110\~150^{\circ}C)$ and roasting time $(10\~50\;min)$, coefficients of determinations $(R^2)$ were 0.8691 (p<0.05), 0.8253 (p<0.l0), 0.8727 (p<0.05), 0.8706 (p<0.05) and 0.8316 (p<0.10) in soluble solid, stigmasterol, $\beta-sitosterol$, hypoglycemic component (total), and overall acceptability, respectively. The maximum value of soluble solid was $71.47\%$ in 65.24 min of steaming time, $126.93^{\circ}C$ of roasting temperature and 37.58 min of roasting time. The maximum value of hypoglycemic component (total) was $764.10\;{\mu}g/g$ in 107.76 min, $117.78^{\circ}C$ and 14.70 min. Meantime, the maximum value of overall acceptability was 6.89 in 126.04 min, $115.79^{\circ}C$ and 43.93 min. The predicted values in optimum conditions for hypoglycemic components and sensory property were in good agreement with experimental values.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1994.11a
• /
• pp.76-77
• /
• 1994

양액재배는 근권의 완충력이 낮기 때문에 작물의 양수분흡수에 필요한 근권환경 조성에 세심한 주의가 필요하다. 양수분 공급이 용이하고 근권완충력도 뛰어난 고형배지의 개발이 최근 활발하게 진행중이며, 현재 가장 많이 사용되고 있는 락을의 폐기시 환경문제가 대두됨에 따라서 다양한 대체배지의 이용가능성이 검토되고 있다. 그러므로 본 실험은 토양, 펄라이트, 왕겨, 피트모스 등의 고형배지를 고형배지를 단용 또는 혼용으로 처리하여근권의 배지종류가 멜론의 생육 및 과실생장에 미치는 영향을 구명하고, 멜론 양액재배시 멜론생육에 적합한 배지를 개발하기 위한 기초자료로 활용하고자 본 실험을 수행하였다. (중략)

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2000.05a
• /
• pp.259-260
• /
• 2000

충남 지역에서 발생되는 하수 슬러지의 물리$\cdot$화학적 특성을 고려하여 적정 처분 방안을 검토하기 위하여 중금속 및 비휘발성 고형물 분석을 수행하였다. 충남 지역에서 발생되는 하수 슬러지의 중금속 함유량은 기준치 이하로서 다소 안전하다 할 수 있으나 지속적인 관리가 요구되며, 이러한 중금속의 함유량도 타폐기물과의 혼합으로 희석효과를 가질 수 있을 것으로 사료된다. 또, 하수 슬러지의 광물 낙석 결과 하수 슬러지의 비휘발성 고형분의 성분은 시멘트 원료로 쓰이는 점토질과 유사하며 소각후에 연소재를 이용한 경량 골재 및 다른 2차 제품의 제조 가능성이 높은 것으로 판단된다.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.140.2-140
• /
• 2003

국산(2, 3년생) 및 중국산 음나무의 껍질을 이용해 음나무 껍질의 추출물에 대해 용매는 열수, 추출시간 및 추출온도는 각각 7시간, 9$0^{\circ}C$의 조건으로 추출하여 색도, 갈색도, 가용성고형분, 총페놀성화합물, 전자공여능, 조사포닌 및 환원당을 분석하였다. 원산지별 음나무 껍질 추출물의 색도에서는 명도(L)는 국산이 중국산 보다 조금 높게 나타났다. 그러나 적색도(a)는 중국산 음나무 수피의 추출물이 적색도가 높았으며 황색도(b) 역시 중국산 추출물이 가장 높은 것으로 나타났다. 갈색도 역시 국내산에 비해 중국산이 높은 수치를 나타내는 경향을 보였다. 가용성고형분의 경우 국산이 중국산 음나무 껍질 추출물에 비해 가용성고형분의 함량이 높게 나타났으며 국산에서는2, 3년생에서 큰 차이를 보이지 않았다. 총페놀성화합물의 경우에서도 중국산 보다 국산 음나무 껍질 추출물의 함량이 더 높게 나타났으며 그 중에서도 특히 국산 2년생이 가장 높은 값을 나타내었다. 전자공여능은 국산 및 중국산 음나무에서 그다지 큰 차이를 보이지 않았으나 국산이 약간 더 높은 경향을 보였다. 환원당의 경우 중국산에 비해 국산이 높은 함량을 보였으며 국산에서는 그다지 큰 차이를 나타내지 않았다. 조사포닌의 경우 다른 추출물에 비해 국산 2년생 추출물이 가장 높은 함량을 나타내었으며 특히 조사포닌의 경우 그 함량이 일반 인삼의 1/3 정도의 함량을 나타내고 있어 기능성을 기대해 볼 수 있을 것이다.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1313-1318
• /
• 2000

총고형분 함량$(TS:\;50{\sim}57%)$을 달리하여 숙성시킨 고추장의 유동특성, 정적 및 동적점탄특성을 관찰하였다. 고추장의 TS가 증가함에 따라서 점조도 지수(K)와 겉보기 점도$({\eta}_{a.5})$는 증가하였으며 유동성 지수(n)는 1보다 훨씬 낮은 0.24-0.31의 범위를 나타내어 고추장은 shear-thinning 성질을 보여주었다. 고추장의 항복응력 측정에서는 고추장의 TS가 증가함에 따라 Casson 항복응력$({\sigma}_{oc})$은 증가하는 경향을 나타내었으며, 또한 고추장의 액상 매개체인 serum 점도$({\eta}_{se})$는 고추장의 TS와 매우 좋은 상관관계$(R^2=0.97)$를 나타내었다. 고추장의 동적점탄성 실험에서는 주파수$({\omega})$가 증가함에 따라 저장탄성률(G#)와 손실탄성률(G@)은 증가하였으며 양(+) 기울기로 G#수치가 G@수치보다 높게 나타났다. 이는 고추장이 약한 겔과 같은 구조적 특성을 갖고 있으며 또한 shear-thinning 거동을 가지고 있음을 나타낸다. 정적점탄성 실험에서 고추장의 총고형분 함량에 따라서 순간탄성 변형$(J_0)$과 지연탄성변형$(J_1)$은 총고형분 함량이 증가함에 따라서 감소하였으며 점도$({\eta}_N)$와 지연시간 $({\tau}_1)$은 증가하였다. 따라서 고추장은 농도가 증가함에 따라 보다 탄력적이며 안정된 구조를 형성하고 있음을 알 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.421-425
• /
• 1985

The changes of pectic substances during baking at $175{\sim}180^{\circ}C$ for 30 minutes and polygalacturonase activities of three sweet potato cultivars on textural properties were investigated. The three different types of sweet potato cultivars were the dry type (Wonki), the intermediate type (Shinmi), and the moist type (Chunmi). The moisture content, alcohol insoluble solid content, composition of pectic substances and hardness were determined before and after baking. It was found that HCl-soluble pectin was significantly changed into water soluble and sodium hexametaphosphate soluble pectin by baking. The dry type, Wonki showed the lowest moisture content, but the highest alcohol insoluble solid content and hardness. Wonki, whose polygalacturonase activity was the highest, had the highest HCl-soluble pectin content after backing.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.126-138
• /
• 2017

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a raw material of wood adhesives. For the purpose, adhesive resins were formulated with NaOH- and $H_2SO_4$-hydrolyzed CF as well as crosslinkers, and then the properties and water resistance of the adhesive resins against hot water were measured. CF was made of mainly keratin-type protein, and no or very low content of heavy metals was detected. Hydrolysis rate of CF increased as NaOH concentration in hydrolysis solutions increased. However, in order to minimize the loss of adhesive property of protein itself by the severe hydrolysis of CF and to seek its proper hydrolysis conditions, NaOH concentrations in hydrolysis solution determined to adjust to 5%, 7.5% and 10%. In the NaOH-hydrolyzed CF, $H_2SO_4$-hydrolyzed CF as a hardener and crosslinker were added to formulate CF-based adhesive resins. Solid content of the resins ranged from 28.3% to 44.8% depending on hydrolysis conditions and type of crosslinker. Viscosity of the resins at $25^{\circ}C$ was very high. However, when the temperature of the resins was increased to $50^{\circ}C$, the viscosity decreased greatly and thus the resins could be applied as a sprayable resin. Retention rate measured to evaluate the water resistance of adhesive resins was the highest in the cured resin formulated with 5% NaOH-hydrolyzed CF and 5% $H_2SO_4$-hydrolyzed CF of 10% based on the solid weight as a hardener. Retention rate depending on crosslinkers added into adhesive resins was the highest phenol-formaldehyde (PF) followed by melamine-urea-formaldehyde (MUF) and formalin. The retention rate of CF-based adhesives formulated with 5% NaOH-hydrolyzed CF, PF and $H_2SO_4$-hydrolyzed CF of 10% and over did not differ statistically from that of commercial MUF resins. All of CF-based adhesives formulated with PF as a crosslinker and one with 5% NaOH-hydrolyzed CF of 55%, 5% $H_2SO_4$-hydrolyzed CF of 15%, and MUF of 30% on the basis of solid weight could be substituted for commercial urea-formaldehyde resins, From the results, CF can be used as a raw material of wood adhesives if hydrolyzed in proper conditions.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.475-481
• /
• 1999

Yeast extracts were prepared using either autolysis or enzymatic digestion methods for industrial application of the Saccharomyces cerevisiae B24 strain developed previously to have high RNA content. Extraction ratio of yeast extract from yeast cell reached 65% when autolysis of yeast slurry having 10% solid content was induced at $50^{\circ}C$ and pH 5.0 by agitating with 100 rpm. However, neither 5'-IMP nor 5'-GMP was detected from the autolyzate. In another attempt to prepare a yeast extract S. cerevisiae B24 culture was treated at $90^{\circ}C$ and then treated by various enzymes including ${\beta}-1,3-glucanase$, phosphodiesterase (nuclease P1), adenylic deaminase, and a protease. The yeast extract prepared by the enzymatic digestion method contained 3.2g of 5'-IMP and 5'-GMP/100g dry yeast extract.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.218.1-218
• /
• 2003

쌀을 기질로 하는 유산균 음료 발효에서 Bacillus와 효모의 혼합배용을 이용한 고체상태 예비발효와 extruder를 이용한 압출조리 전처리가 유산균의 생육을 증진하는 효과에 대하여 검토하였다. Bacillus laevolacticus 와 Saccharomyces cerevisiae의 혼합배양을 쌀과 탈지 대두분의 혼합물에 접종하여 고체 상태로 45$^{\circ}C$에서 배양한 후 자가발열형 단일촉압출성형기를 통하여 처리함으로서 살균과 조직의 변화를 도모하였다. 이렇게 처리된 물질을 분산액으로 만들어 Lactobacillus plantaum 과 Leuconostoc mesenteroides 혼합배양을 접종하여 유산발효시켰다. 예비발효와 압출조리에 의하여 유산균의 증식속도와 산생성이 증가하였으며 가용성 고형분의 함량이 크게 증가하였고 분산 안정성이 향상되었고 관능적 기호도 증가하였다.

• Korean Journal of Food Science and Technology
• /
• v.38 no.5
• /
• pp.642-647
• /
• 2006

Yeast selection and the sterilization methods of strawberry juice were optimized for making strawberry wine. In addition, changes in the physicochemical characteristics of the wine during its fermentation were estimated. Maehyang and Yukbo cultivars of strawberry were tested for wine making; they contained 9.8 and 9.3% soluble solids and 0.59 and 0.58% titratable acidities, respectively. Among six yeasts tested, the Wg-15 and Sc-51 strains were selected based on the alcohol yield in the strawberry wine. Alcohol and soluble solid contents following heat treatment ($85^{\circ}C$, 10 min) or $K_2S_2O_5$ (200 ppm) treatment for sterilization were 7.10-7.20% and 5.60-5.80%, respectively, and no differences were observed between the Wg-15 and the Sc-51 strains. However, the flavor of wine produced following heat treatment was slightly better than that following $K_2S_2O_5$ treatment. The greatest amounts of alcohol were produced after 2 days of fermentation at $26^{\circ}C$. The alcohol content in wines produced with 12, 14, and 16% sugar content in the initial stages were 5.1, 6.0-6.2, and 7.5-7.7%, and the soluble solid contents were 3.9-4.3, 4.1-4.3, and 5.0-5.3%, respectively; no significant differences were observed between the Wg-15 and the Sc-51 yeast strains. For making strawberry wine, we proposed that the sugar content of Maehyang or Yukbo cultivars be adjusted to 16% soluble solids in the initial stages with heat treated at $85^{\circ}C$ for 10 min and fermentation with the Wg-15 or Sc-51 yeast strains at $26^{\circ}C$ for 8 days.