• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.7-11
• /
• 2003

Nowadays, as digital technologies are rapidly developed and requirements for the various types of broadband multimedia services increases, the radio broadcasting is moving to digitalization. DAB(Digital Audio Broadcasting), as an alternation of existing analog radio broadcasting, is a new type of multimedia broadcasting system. DAB supports not only high-quality audio broadcasting but also various types of multimedia data services. In this paper, we investigate the performance optimization method of MOT Protocol, as the standard for additional services, to support the multimedia services in the DAB network. Because the performance of the MOT protocol is dependent on various parameters such as segment size, segment repetition and so on, we find those by simulation for performance optimization. According to simulation results, the suitable segment size is about 2Kbyte and segment repetition is 4 times for performance optimization.

• Journal of Broadcast Engineering
• /
• v.22 no.5
• /
• pp.548-559
• /
• 2017

Recently, various high-quality AV services such as UHDTV have begun to increase as broadcasting technology evolves, and various broadcasting standards have been defined. Among the various broadcasting standards, there are representative delivery technologies which are DASH/ROUTE and MMTP. DASH/ROUTE and MMTP are adopted as delivery standards for UHD broadcasting in south Korea, currently. DASH segment and MPU are segmented units including media data, which are delivered via DASH/ROUTE and MMTP, respectively. In this paper, we analyzed structure of DASH segment and MPU and propose a verification system which enables converting DASH segments to MPUs and delivering them via MMTP.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.171-177
• /
• 2018

In 3D printing technologies, many parameters should be optimized for obtaining a part with higher quality. FDM (fused deposition modeling) printer has also diverse parameters to be optimized. Among them, it can be said that nozzle temperature and moving speed of nozzle are fundamental parameters. Thus, it should be preceded to know the optimal combination of the two parameters in the use of FDM 3D printer. In this paper, a new method is proposed to estimate the range of the stable combinations of the two parameters, based on the single line quality. The proposed method was verified by comparing the results between single line printing and multi-layered single line printing. Based on the comparison, it can be said that the proposed method is very meaningful in that it has a simple test approach and can be easily implemented. In addition, it is very helpful to provide the basic data for the optimization of process parameters.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.133-140
• /
• 2007

Currently, as the requirement for high quality Internet access from anywhere at anytime is consistently increasing, the interconnection of pure ad hoc networks to fixed IP networks becomes increasingly important. Such integrated network, referred to as hybrid ad hoc networks, can be extended to many applications, including Sensor Networks, Home Networks, Telematics, and so on. We focus on some data communication problems of hybrid ad hoc networks, such as broadcasting and routing. In particular. power failure of mobile terminals is the most important factor since it affects the overall network lifetime. We propose an energy-efficient routing protocol based on clustering for hybrid ad hoc networks. By applying the index-based data broadcasting and selective tuning methods, the infra system performs the major operations related to clustering and routing on behalf of ad hoc nodes. The proposed scheme reduces power consumption as well as the cost of path discovery and maintenance, and the delay required to configure the route.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.1101-1107
• /
• 2005

Mold industry has the difficulty to employ young people as the successors of the skilled workers, because it has been regarded as a 3D-jobs(dirty, difficult, and dangerous). To overcome this situation, thus, manufacturing technologies maintained in the factory should be systemized, and engineering systems should support unskilled workers to do their jobs without any difficulty. As a research of developing the supporting system, this study proposes a decision support system that facilitates unskilled workers to easily select high quality NC-data, as well as to increase productivity. The proposed system is assumed to follow a CAM operation scenario that consists of next three steps: 1) identifying several process plans and enumerating feasible unit machining operations (UMOs) from material and part surface information, 2) creating all feasible NC-data based on UMOs using a commercial CAM system, 3) selecting the best NC data among the feasible NC data using four screening criteria, such as machining accuracy, machining allowance, cutting load, and processing time. A case study on the machining of a camera core mold is provided to demonstrate the proposed system.

• Cartoon and Animation Studies
• /
• s.9
• /
• pp.294-309
• /
• 2005

The term 'animation' derived from the Latin 'anima' meaning spirit, life, or vitality. Although its original meaning was somewhat related to creation of life or incorporation of vitality into an inanimate or nonexisting entity by providing mobility through artificial manipulation, it is now used in a rather narrow sense to define collectively the cartoon-based films or tape-recordings and specialists who are involved in animation production or related areas are called animators. The current worldwide market for animation production is progressing and expanding enormously. Although the domestic animation market is ranked as third in the world in terms of overall quantity, the reality is that there are few high quality products that can compete with foreign animation products in the global markets. This issue is further discussed in this paper along with the current status of the domestic animation technology and production. This investigation concerns the comparative analysis of literature data on foreign and domestic animation, which can be a basis for the production of internationally competitive animation work.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.237-250
• /
• 2017

This study focuses on the maintenance of the registration details of the cadastral study (drawings, chiefs) in relation to Uiwang city real estate administration information unification project by the data maintenance business. The purpose of this study is to provide high quality data and improve the efficiency of data maintenance business in the unification of real estate administration information together with the intellectual study diffusion maintenance model in the future. In this study, based on the results of the intellectual study data maintenance project and the effectiveness of institutional, temporal and cost aspects, it was able to show the effect of the data maintenance project. And analyzed the current situation, typed the error shown here, and developed the maintenance plan and maintenance result.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.168-180
• /
• 2018

Due to the spread of mobile devices and the introduction of high-quality services, mobile traffic is expected to increase sharply and overload of cellular networks is expected. D2D communication is a way to reduce the load and evolve to 5th generation. Since D2D communication directly communicates between the terminals, it can reduce the overload of the cellular network and improve energy efficiency, data rate and network performance. This paper proposes a D2D handover scheme for D2D communication in cellular networks. The cellular network is a 3GPP EPS, and the proposed D2D handover method improves the existing EPS handover process considering compatibility between existing EPS and D2D communication. We also demonstrate the superiority of the proposed handover scheme using the network simulator ns-3. Simulation results show that the proposed handover scheme is superior to existing handover methods in terms of CUE variation, packet transmission delay time, and throughput.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2553-2562
• /
• 2013

It is difficult for TCP congestion control algorithm to ensure the bandwidth and delay bound required for media streaming services in broadband wireless network environments. In this paper, we propose the COIN TCP (COncave INcrease TCP) scheme for providing a high-quality media streaming services. The COIN TCP concavely increases the congestion window size by adjusting the increment rate of congestion window, that is inversely proportional to the amount of data accumulated in the router queue. As a result, our scheme can quickly occupy the available bandwidth and prevent the heavy congestion. It also improves the link utilization by adjusting the decrement rate of congestion window according to the packet loss rate with the random loss. Through the simulation results, we prove that our scheme improves the total throughput in broadband wireless network.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.2
• /
• pp.375-383
• /
• 2002

To evaluate the applicability of the construction method involving infilling CFT columns by pumping-up, a trial construction was done using 6 actual size test samples. The 12.8m-high test samples were similar to a four-story building scale. The pumping-up level was controlled at 12m. The test used two types of high performance concrete with $450kgf/cm^2$ standard design strength, and a concrete pump which is used domestically. The pressure changes in pipes or pump as well as the changes in concrete characteristics were measured during construction. in order to evaluate applicability. After the concrete hardened, the column was dismantled. The filled state of the concrete, concrete strength distribution according to column height, etc., were checked to evaluate the quality of the concrete, From the results, some basic data which characterize the pumping-up pressure were suggested. Also, the strength of hardened concrete as well as the filled state were proven to be acceptable ranges.