• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.448-456
• /
• 2011

In this paper, we proposed a LED driver that allows to use a long lifetime MLCC with small voltage capacity to replace the electrolytic condenser that has been used at the output part by storing only the voltage fluctuation due to temperature variation in the output condenser. The proposed LED driver can allow to use a long lifetime MLCC with small power loss as the output condenser instead of the conventional electrolytic condenser with short lifetime because it stores only the voltage fluctuation due to the temperature variation of the LED light source in the output condenser by connecting the output condenser with the input power supply in series in the basic topology of the conventional boost DC/DC converter. In this study, we performed a simulation to verify the conventional DC/DC converter and the proposed DC/DC converter. It was shown that the DC/DC converter proposed through the experiment allows to use MLCC as the output condenser and the efficiency can be improved.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.28-30
• /
• 2022

종래의 프레넬렌즈가 회전하는 중대형 회전식 등명기는 고압방전등(메탈할라이드) 전구를 광원으로 사용하고 있으나, 에너지효율, 수은 등의 함유로 인한 환경오염과 폐기 문제로 인해 2010년 초에서 현재에 이르기까지 선진국을 중심으로 사용규제가 강화되고 있는 실정이다. 국내에 설치 운영되고 있는 회전식 등명기는 내용연수 초과 혹은 도래시기 점차 다가오고 있기 때문에 이에 대한 대응 방안이 필수적인 상황이다. 프레넬렌즈를 회전시키는 회전식 등명기의 LED 광원 개발은 2010년 초부터 해외업체에서 제품출시가 이루어졌으나 국내 중대형 회전식 등명기에 적용된 사례는 없으며 국내에서도 해당 기술 미비로 개발된 사례가 없었다. 이에 본 연구를 통해 단일 고출력 COB LED, 리플렉터, 집광렌즈 등을 이용한 가상초점광원 구현 기술로 회전식 등명기용 LED 광원 연구를 수행하고 해당 연구기술이 적용된 시제품 제작을 통해 성능을 검증하였다.

• Electrical & Electronic Materials
• /
• v.17 no.9
• /
• pp.16-22
• /
• 2004

오늘날 반도체 기술의 획기적인 발전에 의해서 마침내 에디슨의 탄소 필라멘트 백열전구를 대체할 수 있는 "반도체 필라멘트"라 불리는 고출력 백색 LED(lighting emitting diode)가 차세대 조명광원으로 급부상하고 있다.(중략)

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.236-240
• /
• 2009

LED modules, based on MCPCB with a hard barrier oxide layer and an improved thermal dissipation property, are presented. Reflecting cups were also formed on the surface of the MCPCB such that optical coupling between neighboring chips was minimized for improving the photon absorption loss. LED chips were directly attached on the MCPCB by using the COB (Chip On Board) scheme. The LED modules showed significantly enhanced light outputs, compared to the LED modules based on conventional MCPCBs.

• Electrical & Electronic Materials
• /
• v.25 no.5
• /
• pp.3-10
• /
• 2012

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.85-91
• /
• 2004

The purpose of this study was to observe in vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. The kinds of light-curing sources were plasma arc light(P), low heat plasma arc light, traditional low intensity halogen light, low intensity LED(L-LED), and high intensity LED(H-LED). Temperature at the tip of light guide was measured by a digital thermometer using K-type thermocouple. Occlusal cavities$(2{\times}2{\times}1.5mm)$ were so prepared in extracted human premolars as to the remaining dentin thickness was 1mm. Dentin adhesive was applied to all cavities. Experimental groups consisted of no base group, ionomer glass base group, and calcium hydroxide base group. Temperature before and after resin filling was measured. Temperature at the light guide tip was the highest with P and the lowest L-LED. Temperature before resin filling was the highest with H-LED and the lowest with L-LED. Temperature after resin filling was the highest with H-LED and the lowest with L-P and with L-LED. The lining of base partially reduced the temperature rise.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1038-1042
• /
• 2003

LED(Light Emitting Diodes)를 이용한 LCD 백라이트는 현재까지 모바일용의 $2{\sim}3$ 인치정도의 소형모델에서 상용화되고있다. 현재 동종분야에서 $5{\sim}7$ 인치 이상의 중대형에서는 아직 검토나 개발단계인 것으로 파악되고 있다. LED의 특징인 장수명, 고색순도, Robustness 등의 장점에도 불구하고 광효율이나 경제적측면에서 아직 형광램프 Type 에 비해 개선점이 남아있는 것도 개발지연 이유중의 하나다. 최근에 일부 광원업체에서 소비전력 5W로 높은 출광효율을 갖는 고휘도를 가진 LED가 개발되고있다. 고색재현성을 요구하는 TV등의 민수용 디스플레이시장이 커지는 현 추세에 한 방법으로 3색의 고휘도 LED광원을 사용한 백 라이트를 개발했다. R(Red), G(Green), B(Blue)의 3색 점광원 다수를 이중도광판 구조의 장변에 일정 간격으로 배열하여 최종 출사면에서 백색이 되도록 소정의 구성비로 설계하였다. 점광원간의 간격으로 인해 발생되는 혼색도를 보완하기위해 광원과 출사면까지의 광경로를 점광원이 아닌 튜브형의 형광광원 사용시보다 일정량 길게 설계해야 되는데, 이것으로 인해 출광효율이 형광램프구조에 비해 떨어지는 결과로 나타났다. 본 연구에서는 17인치 모니터구조의 백라이트에서 색재현성 105%와 소비전력 67W에서 표면휘도 $2000cd/m^2$ 정도를 달성하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.329-332
• /
• 2012

LEDs are using widely in a field of illumination, LCD LED backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. To achieve high performance LEDs, one needs to enhance output power, reduce operation voltage, and improve device reliability. In this paper, we have proposed that the optimum design and specialized process could improve the performance of LED chip. It was showed an output power of 7cd and input supplied voltage of 3.2V by the insertion technique of current blocking layer. In this paper, GaN-based LED chip which is built on the sapphire epi-wafer by selective MOCVD were designed and developed. After that, their performances were measured. It showed the output power of 7cd more than conventional GaN-based chip. It will be used the lighting source of a medical equipment and LCD LED TV with GaN-based LED chip.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.335-340
• /
• 2014

Recently, LED (Light Emitting Diode) becomes to be useful to apply for the lightening sources in electric systems and the lightening equipment since the power is less consumed with high efficiency, and the size and the weight of LED are small and light, respectively. The LED is controlled with constant current and SMPS (Switching Mode Power Supply). It is necessary for the LED manufacturer to secure the fundamental technology of designing LED chip, and to study the methodology to improve the power factor (PF) and to design the operational circuit for the development of LED to reduce the power loss in the application of LED lightening. The direct AC (Alternating Current) LED driving circuit, HV9910, is widely used in the industry field. In this paper, it is to evaluate the improved methodology for the power factor and efficiency through simulations when PFC (Power Factor Correction) and Noise Filter are added to HV9910.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.2
• /
• pp.7-12
• /
• 2001

In this paper, the optical arrangement of LED lamps was studied using an optical design software for illumination applications. A standard source was constructed, and then simulated its light distribution characteristics of the basic arrangements by shape, by angle, and by displacement. And the color variation circuit was constructed to obtain stabilized light and color output in consideration of the electrical and optical characteristics of high brightness RGB LEDs.