• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4927-4935
• /
• 2012

Turmeric is a medicinal herb with various pharmacological activities. Curcumin, demethoxycurcumin(DMC) and bisdemethoxycurcumin(BDMC) were extracted from turmeric by dipping and ultrasonic wave method. And extraction efficiency was identified using solid phase extraction(SPE). The extracted sample were simultaneously separated and analyzed from three kinds of commercial $C_{18}$ reversed-phase high performance liquid chromatography using water and acetonitrile as mobile phase with isocratic elution mode. Flow rate 1.0mL/min, injection volume $10{\mu}L$ and column oven temperature $40^{\circ}C$ at 425nm wavelength has been conducted. From the experimental results, the optimum mobile phase composition of water/acetonitrile 50/50vol% using RS tech column. It is evident that the amount of curcuminoids extracted(extraction time 4h) by 100% MeOH was higher than any aqueous MeOH composition. Finally, in 100% water extraction, the amount(mAU${\times}$mim) of curcuminoids extracted by SPE was 14.3 and 24.5 times respectively higher than ultrasonic wave and dipping method. The shown results can be applied as sources for pharmaceuticals and functional material.

• The Korean Journal of Mycology
• /
• v.22 no.2
• /
• pp.130-137
• /
• 1994

This experiment was carried out to investigate proper conditions for protoplast isolation and regeneration from mycelia of Lyophyllum decastes. Novozym 234(10 mg/ml) with 0.6 M $MgSO_4$ in phosphate buffer(pH 4.0) was proper for protoplast isolation. The optimal reaction time of the mycelium with the lytic enzyme was four hours in shaking condition at 120 strokes per min. When the mycelium of L. decastes was cultured at $24^{\circ}C$ for 5 days, the formation of protoplasts was effective. The liquid medium was more effective for protoplast isolation than the solid medium. In the liquid medium, high yields of protoplasts were obtained from 0.6 M $MgSO_4$ osmotic stabilizer. Protoplasts of L. decastes were regenerated to normal hyphal growth and the regeneration frequency of the protoplasts in the complete agar medium containing Triton X-100(0.0025%) was $5.94{\sim}8.32%$. The regeneration medium stabilized with 0.6 M sucrose was the best for regeneration of the protoplasts. In contrast to protoplast formation, regeneration was inhibited by the inorganic salts used as osmotic stabilizer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.249.2-249.2
• /
• 2010

최근의 고유가와 환경오염에 대한 대응 수단으로 수송용 바이오연료의 보급에 대한 관심이 세계적으로 높아지고 있다. 이 중 바이오디젤은 동식물성 기름으로부터 메탄올과의 전이에스테르화 반응에 의해 생산되는 경유대체 연료로서 환경 친화성과 지속가능성이 인정됨에 따라 그 생산량이 급격히 증가하고 있다. 바이오디젤의 생산량이 증가함에 따라 대두유, 유채유, 팜유 등의 원료유 가격 상승 및 수급 불안정 문제가 대두되고 있으며 식량자원과의 충돌 문제도 발생되고 있다. 이를 해결하기 위한 방안으로 유리지방산 함량이 높은 저가유지 자원(폐식용유, 폐돈지, 폐우지, soapstock, trapped grease)을 이용한 공정 개발 연구가 활발히 진행되고 있다. 본 연구에서는 비활용되고 있는 해외 열대작물 열매씨앗에서 착유한 식물성 오일의 바이오디젤 원료유로서의 사용 가능성을 검토하였다. 열대작물 오일의 물성 분석 결과 고형물, 수분, 인, 유리지방산 함량이 대두원유보다 매우 높게 나타났다. 오일 중의 인지질은 바이오디젤 제조 반응후 에스테르와 글리세린의 층분리를 방해하여 공정 효율을 감소시키고 유리지방산은 염기촉매와 결합하여 지방산염을 생성해 생산수율을 감소시키는 문제를 일으킨다. 고형물과 수분은 여과와 감압증발에 의해 쉽게 제거가 가능하였다. 15~20%의 유리지방산 함유 열대작물 오일의 전처리를 위해 균질계 산촉매와 비균질 고체 산촉매를 이용해 에스테르화 반응 효율을 조사한 결과 황산이 가장 높은 효율을 보였다. 반응표면분석법(Response Surface Method, RSM)을 적용해 메탄올과 촉매량의 2변수 에스테르화반응 최적화를 수행한 결과 메탄올 26%, 촉매 0.98%로 최적 조건이 도출되었으며 초기 산가 33mgKOH/g에서 0.98mgKOH/g으로 감소됨을 확인하였다. 전처리 정제한 오일의 물성분석 결과 고형물 0.1%, 수분 0.10%, 산가 1.0mgKOH/g, 인함량 20ppm 이하로 바람직한 원료유가 생산됨을 알 수 있었다. 제조된 원료유를 이용해 전이에스테르화 반응 최적화 실험을 RSM에 근거하여 진행한 결과 KOH 0.8%, 메탄올:오일 몰비 6.2:1, 반응온도 $60^{\circ}C$, 교반속도 200rpm, 반응시간 30분으로 나타났으며 증류 정제전 97.3%, 증류후 100.0%의 바이오디젤을 생산 할 수 있었다. 열대작물 오일의 전처리 공정은 메탄올을 과잉양으로 사용함으로 효과적인 알콜 회수 공정이 중요하다. 전처리 후 층분리를 통해 회수되는 메탄올 중의 수분함량은 2%~7%로서 이를 전처리 반응에 재사용하기 위해서는 0.3%이하의 수분함량으로 정제가 필요하다. 본 연구에서는 고가의 증류탑 형태가 아닌 단증류방식으로 2단계 내지 3단계로 0.3% 수분의 메탄올 회수 조건을 도출하였으며 파일롯 공정 설계를 진행하고 있다. 이로서 본 연구의 열대작물 오일은 저가로 충분한 물량의 확보가 가능하다면 바이오디젤 원료 자원으로서 큰 활용가치가 있는 것으로 판단된다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.21-21
• /
• 2001

자원재활용과 원가절감를 위해 고지재활용율이 크게 상승하고 있으며, 이와 아울러 고 지원료로부터 고품질의 제품을 생산할 수 있는 기술에 대한 관심이 증대되고 있는 실 정이다. 저급 고지로부터 고품질의 탈묵펄프를 얻기 위해서는 고지재활용공정의 핵심 공정인 부유부상 공정의 효율화가 가장 중요하다고 믿어진다. 이를 위해서는 부유부상 공정에 가장 큰 영향을 미치는 고형입자의 표면 화학적 특성에 따른 공정의 분리효율 평가와 이에 근거한 공정해석과 개선이 요청된다. 이러한 부유부상 공정을 표면화학적 측면에서 구명하기 위해 마이크로 크리스탈린 셀룰로오스(Microcrystalline cellulose: M MCC)를 모댈 물질로 사용하여 표면화학적 특성은 다르나 입자의 크기와 형태는 동일 한 시료를 준비하였다. 친수성의 표면 특성을 나타내는 MCC의 표면 특성을 바꾸기 위 하여 AKD(alkyl ketene dimer)로 처리비율을 달리하여 솔벤트 사이징 처리를 실시하 였다. 이렇게 준비된 MCC의 표면화학적 특성을 IGC를 이용하여 평가하였다 .. IGC는 G GC를 응용한 표면분석 기술로 고체의 물리화학적 특성과 흡착성을 분석하기 위해서 사용되며 이로부터 흡착제의 표면특성을 평가할 수 있다. 본 실험에서는 AKD로 소수화 정도가 다르도록 소수화시킨 MCC 시료를 이용하여 I IGC 칼럼을 준비하고 n-알칸과 몇가지 극성 용매률 이용하여 이들의 칼럼 내 체류시 간을 측정함으로써 흡착특성을 평가하고 이로부터 흡착현상을 열역학적으로 분석하였다. IGC 분석 시에는 칼럼의 온도를 $30^{\circ}C$, $35^{\circ}C$, $40^{\circ}C$의 3수준으로 변화시켰다. 측정결 과로부터 MCC 표면의 흡착자유에너지와 엔탈피, 엔트로피의 변화량을 평가하였으며, 또한 MCC 표면의 극성에너지와 산염기적 성질을 평가하였다. 실험결과 MCC의 소수화도에 따른 열역학적 흡착현상의 차이가 명백하였다. 이는 소 수화 수준에 따라 소수성 및 친수성 물질의 흡착성이 변화된다는 것을 보여준다. 따라서 탈묵 시 진행되는 기포에의 부착현상을 평가할 수 있는 기초자료로 활용될 수 있다 고 사료되었다.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.4
• /
• pp.21-28
• /
• 2024

In this study, a polyhedral domain decomposition method for Smoothed Particle Hydrodynamics (SPH) analysis is introduced. SPH which is one of meshless methods is a numerical analysis method for fluid flow simulation. It can be useful for analyzing fluidic soil or fluid-structure interaction problems. SPH is a particle-based method, where increased particle count generally improves accuracy but diminishes numerical efficiency. To enhance numerical efficiency, parallel processing algorithms are commonly employed with the Cartesian coordinate-based domain decomposition method. However, for parallel analysis of complex geometric shapes or fluidic problems under dynamic boundary conditions, the Cartesian coordinate-based domain decomposition method may not be suitable. The introduced polyhedral domain decomposition technique offers advantages in enhancing parallel efficiency in such problems. It allows partitioning into various forms of 3D polyhedral elements to better fit the problem. Physical properties of SPH particles are calculated using information from neighboring particles within the smoothing length. Methods for sharing particle information physically separable at partitioning and sharing information at cross-points where parallel efficiency might diminish are presented. Through numerical analysis examples, the proposed method's parallel efficiency approached 95% for up to 12 cores. However, as the number of cores is increased, parallel efficiency is decreased due to increased information sharing among cores.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.430-436
• /
• 2014

The mission objective of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) classified as a pico-class satellite is to verify the technical effectiveness of payloads such as variable emittance radiator, SMA washer, oscillating heat pipe and MEMS based solid propellant thruster researched at domestic universities. In addition, the MEMS concentrating photovoltaic power system and the non-explosive holding and separation mechanism with the advantages of high constraint force and low shock level will be developed as the primary payloads for on-orbit verification. In this study, the feasibility of the mission actualization has been confirmed by the preliminary system design.

• Resources Recycling
• /
• v.30 no.3
• /
• pp.30-40
• /
• 2021

The present study investigates the bioleaching efficiencies of arsenic via contact and non-contact mechanisms. The attachment of Acidithiobacillus ferrooxidans was restricted by a partition system comprising a semi-permeable membrane with a molecular weight cutoff of 12-14 kDa. The results were compared for two arsenic concentrations in the system (1.0% and 0.5% w/v) to maintain a homogeneous system. The overall bacterial performance was monitored by comparing total arsenic and iron concentrations, Fe ion speciation, pH, and solution redox potentials in flask bioleaching experiments over a period of 10 d. Our results indicated that bacterial attachment could increase arsenic extraction efficiency from 20.0% to 44.9% at 1.0 % solid concentrations. These findings suggest that the bacterial contact mechanism greatly influences arsenic bioleaching from mine tailings. Therefore, systems involving two-step or non-contact bioleaching are less effective than those involving one-step or contact bioleaching for the efficient extraction of arsenic from mine tailings.

• Journal of the Korean Chemical Society
• /
• v.38 no.11
• /
• pp.819-826
• /
• 1994

This study described a simple, rapid and cost effective analytical technique for the ultra-trace analysis of dioxins in environmental samples. Liquid-Liquid extraction methods were used for the initial extraction and enrichment of the analyte. Subsequent clean-up procedures were achieved by using strong cation exchanger, silica and Florisil cartridges. Extracts were analysed by HRGC/HRMS-SIM. The efficiency of these analytical methods was tested by recovery and selectivity for elimination of interferences such as phenols, pesticides and PCBs in each step. The mean recovery of 1,2,3,4-TCDD spiked at 10 ppt in sea water was about 92(${\pm}$1.6)%. This analytical method was applied to Kwangyang sea water and 4.5pg/L of 2,3,7,8-TCDD was determined.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.2
• /
• pp.156-164
• /
• 2016

Qualification model(QM) of main payloads including concentrating photovoltaic system using fresnel lens, heating wire cutting type shockless holding and release mechanism, and MEMS-based solid propellant thruster have been developed for the STEP Cube Lab.(Cube Laboratory for Space Technology Experimental Project), which is a pico-class satellite for verification of core space technologies. In this study, we have verified structural safety and functionality of the developed payloads under a qualification temperature range through the QM thermal vacuum test. Additionally, a reliability of thermal model of the payloads has been confirmed by performing a thermal correlation based on the thermal balance test results.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.237-241
• /
• 2006

This experiment was carried out comparison with haploid plants productivity by microspore culture among domestic cultivars of Brassica napus L. Isolated microspore from flower buds were cultured on NLN medium supplemented with 13% sucrose, $0.05mg/{\ell}$ BA and $0.5mg/{\ell}$ NAA. Genotype was important factor in haploid embryo productivity 'Tamlayuchae' showed the highest haploid embryo production frequency (176 embryos formed from 1 flower bud). But, 'Hallayuchae' and 'Youngsanyuchae' were not generated embryo even cell division. When suspension culture on NLN liquid medium at 100 rpm, embryos were developed multilobe abnormal embryo cluster. Multilobe abnormal embryos on MS medium basal solid medium were regenerated multiple shoots. Regenerated haploid plant with well developed shoots and roots on MS basal medium were successfully transferred to pots.