• Geotechnical Engineering
• /
• v.40 no.4
• /
• pp.9-25
• /
• 2024

• Geotechnical Engineering
• /
• v.40 no.5
• /
• pp.8-29
• /
• 2024

• Tunnel and Underground Space
• /
• v.13 no.2
• /
• pp.138-152
• /
• 2003

Three-dimensional computer modeling using FLAC3D had been carried out fur evaluating the thermal-mechanical stability of a high-level radioactive waste repository excavated in several hundred deep location. For effective modeling, a FISH program was made and the geological conditions and rock properties achieved from the drilling sites in Kosung and Yusung areas were used. Sensitivity analysis fer the stresses and temperatures from the modeling designed utilizing fractional factorial design was carried out. From the sensitivity analysis, the important design parameters and their interactions could be determined. From this study, it was found that deposition hole spacing is the most important parameter on the thermal and mechanical stability. The second and third most important parameters were disposal tunnel and buffer thickness.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.239-255
• /
• 2007

An underground research tunnel is essential to validate the integrity of a high-level waste disposal system, and the safety of geological disposal. In this study, KAERI underground research tunnel(KURT) was constructed in the site of Korea Atomic Energy Research Institute(KAERI). The results of the site investigation and the design of underground tunnel were presented. The procedure for the construction permits and the construction of KURT were described briefly. The in-situ experiments being carried out at KURT were also introduced.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.131-147
• /
• 2018

In the present study, the safety of the near surface disposal facility for low- and intermediate-level radioactive waste (LILW) is examined based on the fluid-flow simulation model. The effects of the structural design and hydrological properties of the disposal system are quantitatively evaluated by estimating the flux of infiltrated water at the boundary of the structure. Additionally, the safety margins of the disposal system, especially for the cover layer and vault, are determined by applying the various scenarios with consideration of possible facility designs and precipitation conditions. The overall results suggest that the disposal system used in this study is sufficiently suitable for the safe operation of the facility. In addition, it is confirmed that the soundness of both the cover layer and the vault have great impact on the safety of the facility. Especially, as shown in the vault degradation scenario, capability of the concrete barrier of the vault make more positive contribution on the safe operation of the facility compared to that of the cover layer.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.05a
• /
• pp.293-294
• /
• 2012

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2011.10a
• /
• pp.449-450
• /
• 2011

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.226-227
• /
• 2004

본 연구에서는 원자력 연구소 내에 건설할 고준위 폐기물 지하처분연구시설 부지에 관한 특성을 파악하고, 연구시설의 위치를 선정하기 위한 지질학적 연구를 실시하였다. 지표지질조사를 통하여 연구소 내에 분포하는 암석들의 분류와 선구조 분석을 실시하였고, 지구물리탐사와 시추조사를 통한 지하 암반의 분포양상과 연구시설 주변의 추정되는 파쇄대의 분포를 확인하였다. 지표지질조사결과 복운모화강암과 화강섬록암질 편마암이 점이적인 관계로 분포하고 있으며 (Fig.1, 3), 이들 화강암류 내에는 암맥상으로 중성 혹은 염기성 암맥들이 절리의 방향과 동일하게 관입 분포한다. 절리의 방향성은 N30E, N80W, NS방향으로 분포하고 있다(Fig. 2).(중략)

• Tunnel and Underground Space
• /
• v.22 no.3
• /
• pp.173-180
• /
• 2012

In this study, diagonal ventilation circuits that are advantageous in air flow direction control were studied. Based on the results of the study, it could be seen that air volumes in diagonal ventilation circuits could also be calculated using numerical formulas or programs if the air volumes and air flow directions to be infused into diagonal branches are determined in advance as with other serial/parallel circuits. To apply the results, design plans for high level radioactive waste repositories applied with diagonal ventilation circuits and parallel ventilation circuits. To compared the each design plans and obtain expected operation results, ventilation network simulations were conducted through the Ventsim program which is a ventilation networking program. Based on the results, in the case of diagonal repositories that was expected to cause great increases in resistance, fan pressure was 1570 pa, total flux was 84 $m^3/s$, fan efficiency was 76.4%, fan power consumption was 181.2 kW and annual fan operating costs were 178,710,838 and thus maximum around 8% differences were shown in pressure and flux values and a difference of around 1.5% was shown in terms of operating costs.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.447-457
• /
• 2019

Japan enacted the "Designated Radioactive Waste Final Disposal Act" for the geological disposal of high-level radioactive waste in 2000 and began the site selection process. However, no local government wanted to participate in the siting process. Therefore, in 2015, the Japanese government developed a new site selection process during the literature survey step, and on June 28, 2017 they published a "Nationwide Map of Scientific Features for Geological Disposal" created with the aim of promoting public participation from local governments. This map illustrated the requirements and criteria to be considered in the early or conceptual stages of securing a geological repository and was useful for improving public understanding and exchanging opinions with local governments by analyzing the suitability of different geological disposal sites.