• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.222-224
• /
• 2018

본 논문은 고효율 및 소형 스위치모드 라인 트랜스포머를 제안한다. 종래의 절연을 위한 라인 트랜스포머와 역률개선 회로를 이용한 전원회로는 60Hz 저주파 트랜스포머의 사용으로 전원회로의 크기와 중량이 큰 단점이 있다. 본 논문에서 제안하는 스위치모드 라인 트랜스포머(SMLT)는 고주파수 구동이 가능한 LLC 공진형 컨버터의 트랜스포머로 절연 규격 및 부피저감을 동시에 달성하였다. 또한 2차 측의 풀브리지 정류기를 이용하여 출력전압을 120Hz 사인파로 복원하여, 기존의 역률개선 회로 앞단에 제안 회로를 적용하여 역률개선이 가능하다. 제안방식의 타당성을 검증하기 위해 350W급 시작품에 대한 실험결과를 제시한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• Journal of Sensor Science and Technology
• /
• v.12 no.4
• /
• pp.185-190
• /
• 2003

Recently, sensors which use the infrared light, supersonic waves, and electromagnetic waves have been used for many applications to detect information of the object. For these sensors, the accompanying system which utilizes the sensor should be systematically developed. In this paper, a general microwave radar sensor system is briefly described, and then basic applications of a CW doppler radar sensor system are introduced. For the CW doppler radar sensor applications, a highly-stable, low-cost Dielectric Resonator Oscillator (DRO) has also been designed and implemented, which can be used for commercial microwave sensor systems. The implemented DRO has output power of +5.33 dBm at 12.67 GHz and phase noise of -108.5 dBc/Hz at the 100 kHz offset frequency.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.171-176
• /
• 2006

An experimental study on a fuel-rich gas generator was carried out. Thirty seven double-swirl injectors with recess number of 1.5 were distributed and installed in the injector head, which significantly influences the combustion performance. In the paper, the characteristics of combustion stability are inspected by the parametric varations such as changing length and diameter of a combustion chamber and installing a turbulence ring. The experimental results show that as a resonant frequency took place in a high region, the amplitude of the dynamic pressure generally diminished, however, the combustion instability could not be suppressed perfectly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2003

In this paper, prototype of high-power-factor single-stage electronic ballast for fluorescent lamp is designed and implemented. A new low cost single stage high power factor electronic ballast for fluorescent lamps is based on integration of two-boost converter and LC type high frequency resonant inverter. The proposed ballast is combined by simple construction, because full bridge rectifier diode is eliminated and simple control circuit is applied. Boost converter operate in the voltage of positive and negative half cycle respectively at line frequency (60㎐), operation in discontinuous conduction mode performs high power factor. The experimental results show the good performance as PF 0.99, THD 15.4%, and CF 1.65 at output 63.5〔W〕.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1285-1287
• /
• 2004

본 논문은 20kV 10kW급 고전압 직류 전원장치와 원격제어기의 개발에 대해서 기술하고 있다. 개발된 고전압 직류 전원장치는 다양한 고전압 시스템에 적용하기 위해서 출력전압이 최대 20kV까지 가변 가능하도록 설계되었으며 먼저, 펄스파워 시스템에 필요한 고전압 캐패시터 충전용 전원장치로서 사용하여 동작특성과 신뢰성을 확인하였다. 고전압 직류 전원장치는 단상 고주파 공진형 인버터 방식을 채용하였으며 스위칭 주파수를 최대 100kHz까지 가변시켜 출력전류를 제어하였다. 또한 인버터 출력이 인가되는 고전압 변압기에 2대의 단상 변압기를 사용하여 각각의 출력부담과 전기적 절연내력을 낮출 수 있었다. 한편, 고전압 시스템에 적용 할 때, 조작자의 안전성을 높이고 동작상태를 실시간으로 진단하기 위해서 원격제어기를 개발하였으며 다양한 조건에서의 시뮬레이션과 실험을 통해 개발된 고전압 전원장치와 원격제어기의 동작특성을 확인하였다

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7957-7963
• /
• 2015

R&D trend for Auxiliary Power Supply(APU) of electric vehicle can be well understood by analyzing patents at home and abroad. Based on this trend analysis, domestic technology development direction is proposed. To get technique trend, patents of Korea, Japan, Europe and America published until February of 2014 are analyzed by WIPS DB. First, power converter and transformer two big category are classified. Power converter can be classified into resonant DC to DC converter and resonant Half bridge inverter; transformer can be classified into high frequency transformer, ferrite transformer and matching transformer. By analyzing R&D trend of different counties, companies and years, specific technology needed to be developed and trend of technology can be accurately grasped.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.81-83
• /
• 2009

가정용 연료전지의 상용화를 위해서는 시스템의 신뢰성과 경제성 향상이 중요한 문제이며, 경제성 향상은 시스템의 가격 절감과 컨버터의 효율 향상을 통해서 달성될 수 있다. 본 논문은 1kW급 가정용 연료전지 시스템을 위한 새로운 고효율 푸쉬풀 컨버터의 토폴로지를 제안한다. 제안된 컨버터는 2차측을 낮은 정격 전압을 가진 정류 다이오드를 사용한 2단 정류구조로 구성하여 다이오드의 손실을 저감시키고, 다이오드의 접합 커패시턴스와 변압기의 누설 인덕턴스의 상호작용에 의해 발생하는 공진 전압의 크기를 저감시킴으로써 스너버에서 소모되는 전력을 줄여 효율을 향상시켰다. 실험에서는 일반적인 형태의 푸쉬풀 컨버터 1차측 회로와 고주파 변압기는 공유하고, 2차측회로만 변경하는 방법으로 효율을 측정하여 비교함으로써 제안된 방식의 우수함을 증명하였다. 제안된 방식의 푸쉬풀 컨버터는 기존방식에 비해 특히 경부하에서 높은 효율을 나타내었으며, 전 부하 구간에서 효율의 변화가 크지 않아 부하가변 방식의 운전에 유용하게 사용될 수 있을 것으로 판단된다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.119-122
• /
• 2007

The present study employs experimental approach to identify combustion stability characteristics of fuel-rich gas generators. The gas generator of interest, fueled by LOx and Jet A-1, experienced combustion instability coupled to a longitudinal resonant mode of the combustion chamber at about 1200 Hz. The occurrence of instability is strongly associated with acoustic boundary condition at the exit .and axial location of maximum heat release. As a result, stretching heat release zone in the axial direction by increase of the fuel nozzle diameter has dramatically stabilized combustion.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.69-75
• /
• 2001

Photoimageable thick film technology is a new technology in that the lithography process such as exposure and development is applied to the conventional thick film process. Line resolution of 25 $\mu\textrm{m}$ width and 25 $\mu\textrm{m}$ space could be obtained by laminating green sheet, printing photoimageable Ag paste, exposing the test patterns, developing, and co-firing. In case of using the alumina substrate, 20 $\mu\textrm{m}$ fine line could be also obtained by similar process. Test results showed that exposing power density and developing time were the most important processing parameters for the fine line formation. Microstrip and series gap resonators with well-defined line morphology and good transmission characteristics in high frequency were formed by this new technology, and thereby dielectric constant and loss of test substrate were calculated.