• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.7 s.184
• /
• pp.39-50
• /
• 2006

Laser heat treatment technologies have been used to improve characteristics of wear and to enhance the fatigue resistance for automotive parts. The bjective of this research work is to investigate the influence of the process parameters, such as power of laser and defocused spot position, on the characteristics of laser heat treatment for the case of SM45C medium carbon steel. CW Nd:YAG laser is selected as the heat source. The optical lens with the elliptical profile is designed to obtain a wide heat treatment area with a uniform hardness. From the results of the experiments, it has been shown that the maximum hardness is approximatly 780 Hv when the power and the travel of laser are 1,095 W and 0.6 m/min, respectively. In addition, the hardening width using the elliptical lens was three time larger than that using the defocusing of laser beam.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1251-1252
• /
• 2013

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.141-146
• /
• 2002

The cast iron cylinder liner of the marine engine must be scrapped after its inner surface was definitely worn out due to the friction between the surface and piston ring during the operating. In this research, the restoring method of the worn out cast iron cylinder liner are discussed based on the results of experimental work of the thermal plastic deformation technique.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.78-84
• /
• 2012

Mold may experience deterioration of molding quality as the abrasion of mold occurring due to friction between mold and molded product works as allowance in the course of press process. Therefore, to improve the wear-resistance of mold, methods like nitriding, carburizing, flame and induction surface hardening treatment etc have been applied. However, as such methods are accompanied by problems like shape limitation or product deformation etc, laser surface treatment technology is under review as surface treatment method that can solve such problems. Therefore, in this study, mold material cast iron was surface-treated by using high power diode laser. In previous report 1 and report 2, the heat treatment characteristics were compared by the differences of die materials and shapes, then this paper observed microstructure by using optical microscope and scanning electronic microscope to analyze the structural difference of hardened zone, interface area and base metal after heat treatment. And the structural condition was grasped through EDS. As a result of microstructure, hardened zone showed formation of acicular martensite.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.44-52
• /
• 2010

Recently, with the high performance and efficiency of machine, there have been required the multi-functions in various machine parts, such as the heat resistance, the abrasion resistance and the stress resistance as well as the strength. Fatigue crack growth tests were carried out to investigate the fatigue characteristics of high carbon steel (SM53C) experienced by high-frequency induction treatment. The influence of high-frequency induction treatment on fatigue limit was experimentally examined with the specialfocus on the variation of surface microstructure and the fatigue crack initiation and propagation through fractography. Also, the shape of hardening depth, hardened structure, hardness, and fatigue-fracture characteristics of SM53C composed by carbon steel are also investigated.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.538-545
• /
• 1993

By using propagation characteristics of ultrasonic surface wave, the depth of the surface hardened layer of SCM440 steel with different high frequency induction heat treatments was measured and the same was done on the carburized SCM415 steel. The propagation velocity of surface wave was constant and independent of frequency in t.he specimens with identical microstructure, it was, however, decreased by 59m/s in the hardened layers compared to the unhardened part. From t.he relationship between the effective case depth and the wave length of surface wave, the depth of the hardened layer could be measured and evaluated nondestructively for both induction hardened and carburized steels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.429-436
• /
• 2013

This study considers how the fatigue behavior and probabilistic properties of SAE1055 steel are related to its hardness level. SAE1055 steel was heat-treated using induction hardening. Five types of specimens were prepared (A: base material, B: through hardened material with HV390, C: through hardened material with HV510, D: through hardened material with HV700, and E: surface hardened material with HV700). Fatigue tests were performed under a stress ratio of R = -1 using a 4-point rotary bending fatigue tester. The fatigue behaviors were greatly influenced by the hardness, but the fatigue limit did not increase over a hardness of HV510. In addition, the effect of the hardness level on the failure mechanism was evaluated using a scanning electron microscope. The probabilistic properties of the fatigue life were investigated using a probabilistic S-N approach, and the effect of the hardness level on these properties was evaluated using a residue analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.533-539
• /
• 2008

An high frequency induction hardening technology of vehicle body press-formed of thin sheet steel has been developed to increase the strength of vehicle body parts locally by high frequency induction heating, thereby eliminating the need for reinforcements. And this technique for increasing the tensile strength of sheet steel was practically applied to the front floor cross member and center pillar reinforcement of a passenger car. The side impact behavior has been investigated when induction hardening technology is applied to the conventional low-carbon steel and weight reduction of an automotive body is expected. In this paper, basic experiments were performed for the hat-shaped specimen under high frequency induction heating process. Martensitic transformation was found in the heating zone through microscopic observation which showed higher hardness. In addition, the hardness and strength of the center-pillar specimen made of boron steel increased remarkably by high frequency induction heating.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1005-1006
• /
• 2008

기존의 전자식 안정기 특히 펄스로 시동되는 HID램프용의 안정기에서는 부가적인 시동회로가 필요하게 된다. 하지만 램프 제조업자에 의해 규정된 점화 펄스폭은 제조업자 간에서도 다양하며, 대단히 높게 되어 있으며 그 펄스폭에는 최소 필요한 값이 있고 이것은 통상 $1.5{\sim}2.5us$정도이다. 이와 같은 시동 펄스폭의 조건을 만족하기 위해서는 시동회로 또한 복잡해지고 제작비용도 고가가 된다. 본 연구는 전력소모가 20[%]이상 절감되면서도 광량이 더 많이 방사되는 메탈핼라이드 램프를 UV경화 시스템 즉, LCD, PDP OLED 모듈조립, 평면, 곡면 스크린 인쇄용, 코팅용, 실험용 UV경화 및 UV노광 시스템 등에 사용 가능한 전자식 안정기를 고주파 시동의 이점을 유지해 가면서 지연 시간에 기인하는 램프의 꺼짐 및 대순환 전류의 문제를 해소하고 고압 대용량 램프를 구동할 수 있는 20KW급 전자식 안정기를 제안하여 22KW UV LAMP를 사용하여 전자식 안정기를 구동 실험으로 검증하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.41.1-41.1
• /
• 2009

최근 금형은 자동차뿐만 아니라 여러 산업에서 필수적이며 제품의 품질은 물론 제조원가에 막대한 영향을 미친다. 이러한 금형은 침탄, 질화, 고주파담금질등에 의해 표면처리 되어져 왔으나, 이와 같이 기존의 처리 방법은 모두 처리물 전체를 가열하거나 균일한 가열을 하지 못하기 때문에 변형의 문제와 처리후의 후가공의 경비 문제, 그리고 극히 일부분만 경화가 필요한 부품에는 적용하기 어려운 문제점이 있다. 이러한 문제를 해결할 수 있는 표면처리로서 레이저 표면처리 방법이 대두되고 있으며, 레이저 표면처리는 레이저 빔을 피처리물의 표면에 조사하고 적당한 속도로 이동을 하게 되면 레이저조사부위가 급속하게 가열되고 레이저빔이 통과한 후에는 표면의 열이 내부로 열전도 되어 급속히 자기냉각(Self-quenching)됨으로서 표면에 새로운 기계적 성질을 갖게 하는 표면처리법이다. 이와 같이 레이저를 이용한 표면처리로 기존의 CW Nd:YAG 레이저 열원보다 효율이 좋은 HPDL(High Power Diode Laser)를 이용한 고효율, 고기능 금형 표면처리 후 재료적 물성을 평가하고자 한다. 평가방법은 레이저빔의 조사속도 및 온도변화에 따른 표면처리부, 열영향부 그리고 모재 부분에 대한 경도특성 및 미세조직 변화를 관찰하였다. 또한 조사속도 및 온도변화에 대해 경화깊이를 관찰하였다.