• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.407-415
• /
• 1999

There are two kinds of instability phenomena for shell-type structures which are snap-through and bifurcation buckling. These are very sensitive according to the shape characteristics including rise-span ratio and especially shape initial imperfection. In this study, the equilibrium path of shallow sinusoidal arches supported by hinges at both ends is investigated to grasp the instability behavior of shell-type structures with initial imperfection. The Galerkin method is used to get the nonlinear discretized equation of governing differential equation considering geometric nonlinearity of arches and the perturbation method is also used to transform the nonlinear equation to incremental form.

• Annual Conference on Human and Language Technology
• /
• 1997.10a
• /
• pp.353-359
• /
• 1997

주로 영어, 불어 등의 형상적 언어(configurational languages)의 구문 분석을 위해 개발된 범주 문법은 문장 구성 성분의 문장 내의 위치가 대체적으로 고정적이며 통사 기능이 그 위치로서 할당 되는 형상적 언어의 통사적인 특성에 따라 방향성의 개념을 도입하였다. 그러나 이 방향성 개념은 문장 구성 성분의 문장 내의 위치가 비교적 자유로운 한국어 등의 비형상적 언어(non-configurational languages)에 그대로 적용하기에는 많은 무리가 따른다. 심지어 형상적 언어에 적용하는 경우에도 도치나 외치된 문장 또 격리된 구조(unbounded dependency constructions)가 있는 문장들도 적절히 분석해 내지 못한다. 이런 이유로 본고에서는 범주 문법에 도입되어 있는 방향성을 재고하고 아울러 한국어 구문 분석과 문장 생성을 위한 범주 문법 적용상의 다섯 원칙을 제안한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.173-180
• /
• 1994

본 논문에서는 임의 형상의 블록 다각형 박막 고유 진동해석을 위해 파 형태의 해석해를 사용하는 새로운 기법을 제시하였다. 파 형태의 해석해를 임의 형상의 박막에 사용하는 데 있어 나타날 수 있는 시도해의 종속적인 문제점을 지적하고, 이를 극복하는 방안을 제시하였다. 여러 수치 예제를 통해 본 기법의 유용성과 타당성을 보였고, 특히 이 기법은 특정 주파수 대역에서 고유 진동수를 찾고자 할 때, 매우 효율적임을 알 수 있다. 본 논문은 기초 연구로서 제한된 모든 변이 고정된 블록 다각형 형상의 박막의 고유 진동 해석만 수행하였지만, 이 기법을 확장, 발전시켜 나가면, 어떠한 형상이나 경계조건을 갖는 박막뿐만 아니라 평판의 진동 해석에도 적용할 수 있으리라 기대하며, 이를 위한 연구가 진행중이다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.195-198
• /
• 2011

석유 및 천연가스 생산에 사용되는 고정식 해양플랜트에는 자켓 구조물이 가장 많이 사용되고 있다. 생산에 사용되는 자켓 구조물은 풍하중이나 파랑하중에 의해 인명의 피해 없이 변위 및 응력에 대해 안전해야 한다. 그러나 1940년대 후반부터 사용되어 온 자켓 구조물은 피로하중, 노후화로 인해 내구성에 문제가 생기고 있다. 본 논문에서는 자켓 구조물의 안전성을 검토하기 위해 모드형상을 이용하여 자켓 구조물의 손상 위치를 탐색하는 방법을 제시한다. 제시한 손상탐지기법의 효용성을 입증하기 위해 자켓 구조물의 유한요소모델에 임의의 손상을 모사하였다. 유한요소모델의 손상 전 모드형상과 손상 후 모드형상의 모달 변형에너지의 변화를 이용하여 손상 지수를 유도하고 유도한 손상지수를 사용하여 손상이 있는 부재와 손상이 없는 부재를 분류하였다. 연구 결과 손상지수가 '0'인 부재를 제외한 나머지 부재 모두 본 연구에서 제시한 손상탐지기법으로 손상 부재를 판별할 수 있었다.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.87-93
• /
• 2011

FSSA(Fine Sun Sensor Assembly) is the important sensor for satellite attitude control. FSSA measures the direction of the sun's rays and determines whether the satellite is in the eclipse or not. FSSA for GEO Satellite is also used to acquire the attitude error information in the attitude control reference frame and acquire the Sun direction during transfer orbit or mission Process. This paper shows the configuration of Fine Sun Sensor for LEO and GEO Satellite and their principle of operation that angle measurement is obtained by using the transfer function which is the ratio of the difference between output currents of Solar Cell to the sum of all output currents.

• Clean Technology
• /
• v.7 no.2
• /
• pp.141-149
• /
• 2001

The effects of various factors such as adsorption temperature, interstitial velocity, species and concentration of adsorbates(benzene and toluene) and aspect ratio(L/D) on adsorption characteristics were investigated in a fixed bed with activated carbon. The breakthrough time in a fixed bed was decreased with the increasing of adsorption temperature, interstitial velocity and concentration of adsorbates. The interstitial velocity, concentration of adsorbates and adsorption temperature had influenced considerably upon the MTZ(mass transfer zone) and LUB(length of unused bed) obtained through the breakthrough curves, while aspect ratio(L/D) had smaller effect than former factors. Especially, the concentration of adsorbates among factors have the largest effect on MTZ and LUB. From comparison with the model isotherms, such as the Langmuir, Freundlich and Langmuir-Freundlich, the experimental isotherm data of benzene and toluene agreed farily well to three adsorption isotherm models.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.16-23
• /
• 2021

Domestic and foreign manufacturers are developing VTOL UASs in various shapes in line with demand for future technologies. UASs have been developed in a shape classified as fixed/rotary wing, and verified by appropriate certification standards. However, airworthiness certification of recent VTOL UASs is strict with the absence of VTOL-specific certification standards. In this paper, criteria applicable to VTOL UAS were presented through analysis of STANAG-4671 and STANAG-4702, which are certification standards for fixed/rotary wing UAS of the North Atlantic Treaty Organization (NATO) and the Special Condition for VTOL Aircraft (SC-VTOL) of European Aviation Safety Agency (EASA). For this, the categorization criteria of general/fixed-wing/VTOL characteristics were established for each standard item and utilized for analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.253-258
• /
• 2012

The Cartesian grid system has generally been used in casting simulations, even though it does not represent sloped and curved surfaces very well. These distorted boundaries cause several problems, and special treatment is necessary to resolve them. A cut cell method on a Cartesian grid has been developed for the simulation of threedimensional mold filling. Cut cells at a cast/mold interface are generated on Cartesian grids, and the governing equations are computed using the volume and areas of the cast at the cut cells. In this paper, we propose a new method based on the partial cell treatment (PCT) that can consider the cutting cells which are cut by the cast and the mold. This method provides a better representation of the surface geometry, and will be used in the computation of velocities that are defined on the cell boundaries in the Cartesian gird system. Various test examples for several casting process are computed and validated.

• Journal of Practical Engineering Education
• /
• v.7 no.2
• /
• pp.119-123
• /
• 2015

ABS material is easy to process, impact resistance and heat resistance is strong. ABS material is often used as a substitute for the interior and exterior metal material for an automobile. As the demand of ABS increases, fabricating education using ABS has also been increasing its importance. As part of its education, ABS material is used in the mold fabricating part of the regional and national skills competition. At this time, the force of the vise for fixing the ABS material in the processing using the ABS material can affect the final shape after machining. However, it has not been an accurate description of the notes and instructions of working in education. Therefore, in this study, we study the impact the force of vise affect structural shape in the fabricating education using ABS material and during fabricating education of ABS material, trying to present the notes of the appropriate it.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.11
• /
• pp.1099-1104
• /
• 2012

The study investigates the mechanical deformation of a newly developed screwless omega-wire dynamic system for stabilization of the spine. The omega-wire spring stabilization system was tested under tension, compression, and dynamic compressive fatigue loads. In addition, its bending deformation was compared to that of a spiral-wire spring system using FEA. A model whose hanger inter-center distance is 60 mm showed an ultimate tensile stress of 3981.7 N at a displacement of 3.61 mm and an ultimate compressive load of 535.6 N at a displacement of 2.16 mm. Under fatigue loading of 5 Hz with 10 N/1 N, it did not show any failure over 5 million cycles, and the displacement was restricted to 8-9 mm. In the FEA, the omega-wire spring system showed more flexible bending features than did the spiral-wire spring system.