• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.26-29
• /
• 2017

KARI has been conducting R&D for independent development of KSLV-II since 2010. Vehicle holding device is a device for vertically standing SLV on the launch pad of launch complex and fixing the lower part of vehicle in order to firmly fix vehicle so that SLV does not fall from an external load such as a wind load. When thrust generated after the 1st stage engine ignition of SLV must exceed the takeoff weight of vehicle, and holding device should be quickly released so that it does not interfere with takeoff of vehicle like other ground equipment at the beginning of the launch. Pyro-valve is one of the key components constituting VHD, and it should have high reliability and quick response characteristics with similar functional parts applied to launch vehicle separation device and satellite separation device. Through this paper, I intend to broaden the overall understanding of the development process of pyro-valve for VHD and KSLV-II.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.1-13
• /
• 1994

Procedures for the development of a preswirl stator-propulsion system for a VLCC 300K are described in this paper. The preswirl stator-propulsion system is one of the compound propulsor systems, which is used for the purpose of recovering propeller slipstream rotational energy by locating a stator in front of the propeller. The preswirl stator-propulsion system can be considered as a most reliable energy saving device because of its simple mechanism. Five stators are designed for the existing hull form and propeller, and their effects are verified by model tests. Open-water test result of the preswirl stator-propulsion system at the cavitation tunnel show $4{\sim}6%$ increase of open-water efficiency compared to that of a propeller without stators. Maximum 6.5% decrease of delivered power at the design speed(15.5knots) is expected with the designed stator based on the analysis results of resistance and self-propulsion test at the towing tank.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.104-109
• /
• 2009

In this paper, economic analysis of Energy Storage System for power system is performed. Economic analysis is performed to show the benefits of Energy Storage System. Results illustrate the advantages of Energy Storage System not only acting as an alternative generation resource but also giving a better reliability and stability in power system.

• Clinics in Shoulder and Elbow
• /
• v.13 no.2
• /
• pp.266-269
• /
• 2010

Purpose: We report case of neglected elbow dislocation for three years. Material and method: A 45 years old female patient presented with neglected elbow dislocation for three years. Since the patient had contracture in both lateral and medial collateral ligament of elbow, dissection was done. After total separation of posterior articular capsule and incision of anterior articular capsule, by manual manipulation, reduction of radiohumeral and ulnohumeral joints were obtained. We applied modified Morrey type hinged external fixation in the elbow and done early elbow exercise. Result and Conclusion: Since we have experienced a satisfactory result in the case with neglected elbow dislocation for 3 years by using open reduction and hinged external fixation, we report it with the literature.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.1
• /
• pp.10-16
• /
• 2018

Purpose: The purpose of this study was to evaluate distalizing effects from the Pendulum appliance on vertical component of craniofacial structures. Materials and Methods: 20 Patients who visited for orthodontic treatments are assigned to two groups. Group I, SN-MP > 37 degrees are showing hyperdivergent pattern. Group II, 29 < SN-MP < 37 degrees are showing mesocephalic pattern. Each group are consisted of 10 people. Results and Conclusions: Differences between skeletal classifications result in significant differences at labioversion of lower incisors and distalized amount, which is larger at Group I (P <.05). Group II has only shown significant distalized molars (P < .05). Labioversion of lower incisors has not shown significant change. Skeletal anchorage-assisted Pendulum appliance doesn't deteriorate vertical component nor significantly improve.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.628-634
• /
• 2018

In an examination of the temporomandibular joint disc, MRI(Magnetic Resonance Imaging) is a useful method, and it is necessary to conduct an examination with one's mouth open for a long time to observe the accurate position change of the disc. Thus, this study would produce a TMJ device, using the 3-D printing technology, which would maintain the state of opening the mouth and would evaluate its usefulness as compared to the existing fixed device. As compared to the image using the existing TMJ device, the image taken with the self-produced TMJ device with a 3-D printer showed a somewhat lower SNR, but there was no defect for a clinical use. It is judged that benefits to costs would increase, since it can be customized for the individual patient and can contribute to the production of similar tools by utilizing the 3-D printing technology.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.27.3-27.3
• /
• 2009

인공위성이 발사체로부터 분리되면, 인공위성은 가장 먼저 태양 전지판을 전개한 후 전력을 생산한다. 전력은 인공위성의 운영에 반드시 필요하므로, 태양전지판의 성공적인 전개는 인공위성의 성공적 임무 수행의 필수 요소이다. 따라서, 태양전지판 또는 태양전지판의 전개장치 개발시에는 태양전지판이 이상없이 전개되는지를 확인할 수 있는 태양전지판 전개해석을 반드시 필요로 한다. 현재 개발중인 저궤도 지구관측위성의 경우, 3장의 태양전지판이 사용이 되며, 각 태양전지판의 전개 및 고정은 힌지 및 스트럿으로 이루어진 태양전지판 전개장치에 의하여 이루어진다. 이 논문에서는 다물체 동역학 해석프로그램인 Recurdyn을 이용하여, 상세 태양전지판 전개해석을 수행하고자 한다. 이전 연구에서는 기본적인 전개해석 모델을 수립하여, 태양전지판의 기본 전개거동을 확인할 수 있었다. 그러나, 태양전지판이 완전히 전개된 이후에 고정되는 부분의 모델링이 복잡하여, 단순하게 가정하여 전개해석을 수행하였다. 이러한 가정은 태양전지판의 전개 입장에서는 좀 더 극한상황이 되었으며, 이러한 환경하에서도 충분히 태양전지판이 잘 전개됨을 확인할 수 있었다. 이 논문에서는 간략화된 태양전지판 고정장치 및 기타 다른 부분들을 좀 더 상세모델링 하여, 전개 거동이 좀 더 실제에 가깝도록 하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.640-644
• /
• 2009

현재 태양광 산업에서는 고정식 태양광 발전장치보다 발전 효율이 우수한 추적식 태양광 발전장치를 개발하는 연구가 활발하게 진행되고 있다. 추적식 태양광 발전장치는 고정식에 대비하여 단위면적당 일사량을 최대로 유지할 수 있을 뿐만 아니라, 일조시간을 최대로 하여 태양전지의 발전효율을 극대화할 수 있다. 따라서 정밀하면서도 저렴한 태양위치 추적장치는 태양광 발전사업의 경제성을 높이고, 성능 대비 투자비용을 낮춰 태양광 발전설비의 보급을 촉진시켜줄 수 있는 중요한 기술이다. 본 연구는 태양위치를 감지하는데 센서를 사용하지 않고 천문학과 수학을 이용하여 정밀도 1분($0.016^{\circ}$)이내의 태양위치를 계산하는 알고리즘에 관한 것이다. 본 연구에서 제안하는 알고리즘은 장치의 제작비용을 낮추어 줄 뿐 아니라, 발전효율도 높여준다. 구현된 알고리즘을 적용시킨 추적식 태양광 발전장치를 운용 실측한 결과, 최대 30초($0.0038^{\circ}$)의 오차를 보여 추적식 발전장치의 경제성을 높일 수 있고, 시간복잡도(Time Complexity)와 공간복잡도(Spatial Complexity)가 낮아 실시간 태양 추적장치에 최적임을 확인하였다.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.191-196
• /
• 2004

Most of studies for landing gear have been performed to analyze the shock absorbing characteristics of oleo-pneumatic struts. But it is not easy to solve the dynamic specific properties of spring type composite landing gear using a present method. The shock absorbing abilities of oleo-pneumatic landing gear strut are under influence of the internal design method on the strut rather than the landing gear structure itself. Unlike oleo type, spring type composite strut absorbs the shock with structural strength and dynamic characteristics of the strut's material and shape. The tests and analysis for the shock absorbing rate and dynamic behavior of the spring type composite fixed landing gear for 4 seats small aircraft, have been performed using landing gear drop test rig.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.3
• /
• pp.321-327
• /
• 2009

This paper studied the influences of the main design parameter-the expansion angle and the material properties of the self-expansion anterior cruciate ligament fixation device on the contact condition with the bone and the initial stability of the device. Using finite element analysis, the stress distributions of the ring part of the device and the wall of the bone tunnel were calculated. And the micro-migration of the device by the pull-out force was calculated. From the analysis results, it was found that when designing the self-expansion type anterior cruciate ligament fixation device, it is desirable to use the material having higher Young's modulus and to design the fixation device that all wedges uniformly maintain contact with bone to obtain initial stability after operation.