• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.1
• /
• pp.25-33
• /
• 2017

The lower $2^{nd}$ molar eruption is beginning to mesiolingually, then rotate to distobuccally so it has a tendency to be tilted and impacted mesially. Signs and symptoms of impacted $2^{nd}$ molar are similar to impacted $3^{rd}$ molar's. However, treatment plan for impacted $2^{nd}$ molar is different from that of impacted $3^{rd}$'s. The former is the preservation and uprighting of $2^{nd}$ molar so that it could act to recovery of mastication, symmetrical facial growth, maintaining the symmetry of dental arch, stable occlusion, while the latter is the extraction of tooth. If the uprighting treatment is planned, most proper protocol of treatment and the additional treatment opition should be applied with consideration for it's crown exposure, present of $3^{rd}$ molar which interrupt the uprighting process, extrusion of opposite tooth. Although it could not improve the esthetic result, it could prevent many dental problems. Therefore, uprighting for impacted lower $2^{nd}$ molar is meaningful treatment.

• The korean journal of orthodontics
• /
• v.14 no.1
• /
• pp.15-24
• /
• 1984

The purpose of this study was to evaluate the effect of O.M.A on Angle's class III malocclusion. The author analysed the data obtained from pre- and post-treatment lateral cephalograms. The results obtained were as follows : 1. Forward growth of maxillary complex was accomplished. 2. The mandible showed few morphological changes in the presence of downward and backward swing. 3. It was assumed that the hooks attached to the intraoral appliance should be placed as far frontally as possibie. 4. Relations of the upper and lower jaws were improved resulting in better facial profiles.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.308-320
• /
• 2006

Rapid canine retraction, first introduced by Liou, is a distraction osteogenesis applied to the periodontal ligament tissue. Rapid tooth movement was facilitated by establishing minimal bony resistance on the distal surface of the canine by socket preparation and by osteogenesis on the mesial side in response to the periodontal distraction. Since undesired buccal tipping or extrusion of the canine during retraction tends to occur, it is crucial to maintain the firm path of movement and the axis of the canine during retraction. In order to improve the predictability of the canine movement, lingually extended distraction screws with heavy labial guiding wires were designed. Prefabricated plastic canine models for the estimation of socket depth and miniscrew implants for anchorage reinforcement were also devised. Applying these devices to a female patient with Class II anterior protrusion, the whole treatment was effectively finished in 13 months. Loss of vitality or periodontal problems did not occur throughout treatment, and stable occlusion was maintained during 10 months of retention. This case report demonstrates that a predictable rapid canine retraction can be achieved through the use of this modified technique.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.547-552
• /
• 2001

Extracting mandibular incisors for orthodontic treatment may adversely affect the occlusion. However, when properly used, extraction of mandibular inciors is a selection for the correction of the malocclusion. Generally, treatment for crowding needs to select between nonextraction and four premolar extraction. Approaches for crowded mandibular incisors include distal movement of posterior teeth, lateral movement of canines, labial movement of incisors, interproximal enamel reduction, removal of premolars, removal of one or two incisors, and various combinations of the above. Extraction of incisors is used in case of crowding, anterior tooth size discrepancy, absent of maxillary lateral incisors, and ectopic eruption. But severe overjet. overbite, and space are the contraindication of it. A patient had severe crowding on upper anterior teeth, impacted upper left lateral incisor, palatal ectopic eruption of upper right incisor and severe crowding on lower anterior teeth. Lower lateral incisors are extracted for space availability and facial esthetics. We report the case of orthodontic treatment of upper and lower anterior crowding through extraction of lateral incisor.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.1-2
• /
• 2021

3D NAND 플래시 메모리는 플래너(2D) NAND 셀을 적층하는 방식으로 단위 면적당 고용량을 제공한다. 하지만 적층 공정의 특성상 각 레이어별 또는 셀 위치에 따라 오류 발생 빈도가 달라질 수 있는 문제가 있다. 이와 같은 현상은 플래시 메모리의 쓰기/지우기(P/E) 횟수가 증가할 수록 두드러진다. SSD와 같은 대부분의 플래시 기반 저장장치는 오류 교정을 위하여 ECC를 사용한다. 이 방법은 모든 플래시 메모리 페이지에 대하여 고정된 보호 강도를 제공하므로 물리적 위치에 따라 에러 발생률이 각기 다르게 나타나는 3D NAND 플래시 메모리에서는 한계를 보인다. 따라서 본 논문에서는 오류 발생률 차이를 보이는 페이지와 레이어를 분류하여 각 영역별로 차별화된 보호강도를 적용한다. 우리는 페이지와 레이어별로 오류 발생률이 현저하게 달라지는 3K P/E 사이클에서 측정된 오류율을 바탕으로 페이지와 레이어를 분류하고 오류에 취약한 영역에 대해서는 패리티 데이터를 추가하여 차별화된 보호 강도를 제공한다. 오류 발생 횟수에 따른 영역 구분을 위하여 K-Means 머신러닝 알고리즘을 사용한다. 우리는 이와 같은 차별화된 보호정책이 3D NAND 플래시 메모리의 신뢰성과 수명향상에 기여할 수 있는 가능성을 보인다.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.543-555
• /
• 1995

In the orthopedic therapy, the biomechanical analysis of the appliance is necessary to get a desirable orthopedic effect. The purpose of this study was to investigate the desirable direction and application position of the protraction force. The protraction force of 500g was applied to the first premolar or to the first molar. The direction of force application was paralell or $20^{\circ}$ downward to the occlusal plane respectively. The stress distribution and the displacement within the maxilla was analyzed by a 3-dimensional finite element method. The findings obtained were as follows 1. Protraction forces caused a counterclockwise rotation of the maxilla. 2. The degree of maxillary rotation was less when the force was applied $20^{\circ}$ downward direction to the occlusal plane than when applied to the parallel direction. 3. The degree of rotation of maxilla was greater when the parallel force was applied to the 1st premolar than when applied to the first molar, whereas it was greater when force is applied $20^{\circ}$ downward than at the first premolar. In conclusion, the $20^{\circ}$ downward protraction from the first premolar induced the least counterclockwise rotation of the maxilla and was thought as the desirable direction and application position of the protraction force.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.63-72
• /
• 2003

Over the Past decades, the number of Patients seeking orthodontic treatment has increased markedly with socioeconomic development and change of recognition on appearance. The purpose of this study was to provide an epidemiologic data base related to the orthodontic treatment need. We could take an adequate information regarding the characteristics of orthodontic patients, and the changing trends about treatment mordality. Distrubution and treands were Investigated in 676 patients who had been examined and diagnosed at Department of orthodontics, Dental Hospital, Seoul National University from January to June in 1992 and 2002. 1. Sex distribution of patients changed from 1:2.1 to 1:1.5 (male female). 2. In 2002, are distribution had shown $7\~12$ year-old group being the largest$(32.0\%)$ and percentage of $19\~24,\;13\~18,\;over\;25,\;4\~6,\;0\~3$ year-old group were $24.0\%,\;21.6\%,\;14.2\%,\;5.8\%,\;2.4\%$ respctively. Compared with data in 1992, the number of adult patients highly increased. 3. With regard to Angle classification, each percentage of Class I, Class II div 1, Class II div 2, and Class III malocclusion were $25.0\%,\;20.9\%,\;3.4\%,\;and\;48.1\%$ respectively in 2002. 4. Geographic distribution showed that most of the patients visited $(37.0\%)$ lived in northeast of Seoul in 2002. 5. Mandibular prognathism showed the highest percentage in chief complaints. The percentages of crowding and facial asymmetry were $14.2\%\;and\;11.8\%$ in 2002. Patients with facial asymmetry increased significantly. 6. Percentages of patients treated with fixed appliance and orthognathic surgery were $38.0\%\;and\;25.0\%$ in 2002. Patients needed to observe the growth pattern comprised $13.0\%$ with increasing trends. The use of chin cap reduced and the percentage of ortognathic surgery and growth observation increased significantly.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.43-53
• /
• 2009

Objective: The purpose of this study was to compare the difference in three dimensional tooth movement using three different wire sizes($0.018{\times}0.025-in,\;0.016{\times}0.022-in$ 0.016-in) on a NiTi scissors-bite corrector. Methods: Computed tomography(CT) images of the experimental model before and after tooth movement were taken and reconstructed into three dimensional models for superimposition. The direction and the amount of tooth movement were measured and analyzed statistically. Results: The lingual and intrusive movements of the crown of the maxillary second molar were increased as the size of the NiTi wire increased. The roots of the maxillary second metals moved buccally except for the 0.016-in group. The intrusive movement of the roots of the maxillary second molars was increased as the size of the NiTi wire increased. Due to the use of orthodontic mini-implants, anchorage loss was under 0.2 mm on average. Conclusions: The $0.018{\times}0.025-in$ NiTi wire was most effective in lingual and intrusive movement of the maxillary second molar which was in scissors-bite position. Indirect skeletal anchorage with a single orthodontic mini-implant was rigid enough to prevent anchorage loss.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.8 no.1
• /
• pp.10-14
• /
• 2012

Self-injurious behavior (SIB) has been defined as the deliberate destruction or alteration of body tissue without conscious suicidal intent. It occurs in conjunction with a variety of psychiatric disorders as well as various developmental disabilities and some syndromes. The behavior is destructive and causes concern and distress to all involved in the care and treatment of the affected individual. A 13-year-old girl with autism, mental retardation and delayed development was reffered from her pediatrician because of severe and painful lower lip biting. An intraoral examination revealed a diffuse swelling of lower lip. It was covered with necrotic slough and the ulcer and scarring of the lower lip was observed. We chose to use an oral removable prosthesis for Conservative treatment. It was decided to use a soft silicone mouthguard in the maxillary arch. Initially, she could not tolerate the appliance inside her mouth but soon adapted with the appliance. After one month, she lost the mouth guard and started lip biting. So we made mouth guard again. There are no standard methods for preventing self-injurious behavior in a patient who is developmentally disabled. Appropriate preventive methods must be developed for each individual patient based on close observation and clinical findings. Behavior modification techniques, pharmacological treatment, extraction of teeth, orthognathic surgery and intra/extra oral appliances can be performed for adjust self-injurious behavior. A suitable oral guard could be tried initially before employing more invasive approaches.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.132-132
• /
• 2000

환경오염과 이상기후의 영향으로 인한 수자원의 고갈과 함께 국내의 경우 수자원 개발 계획 및 수요량을 감안할 때 향후 7 년 내에 물부족 현상을 겪을 것이라는 보고가 있 었으며, 환경부담을 줄이기 위해 폐수의 배출기준은 강화되고 있다. 이러한 상황에서 제조 특성상 타 업종에 비해 폐수 발생량이 높은 편인 국내의 제지산업은 여러 해전부터 이에 대 한 방안을 모색하여 왔다. 일반적으로 폐수 수질 관리와 청수 사용량의 절감을 위해 고가의 폐수 처리 장치를 설치하거나 폐수 재활용을 통해 공정을 극도로 폐쇄화하는 방안으로 연구 가 진행되어 왔다. 이 중 용수의 재활용이 가장 경제적인 방법이지만, 재활용이 지속될수록 각종 무기염과 콜로이드성 유기물질이 축적되어 각종 약품의 효능 저하, 탈수속도의 저하 및 생산 제품의 품질 악화 등의 문제를 유발한다고 알려져 있다. 이를 해결하고자 하는 노 력으로 펄프 원료에 따른 공정수 내 용해성 물질의 분석과 재활용 횟수에 따른 각종 SS와 D DS의 축적 정도에 대한 기초 연구가 수행되었으며, 고폐쇄화된 공정에서 성능을 발휘할 수 있는 첨가제의 개발과 적용 방법에 대한 연구도 수행된 바 있다.여러 지종 가운데 골판지 원지는 용수의 재활용률이 상당히 높은 지종이기 때문에 공정수의 재활용이 진행될수록 열악한 저급 원료로부터 각종의 다양한 물질이 용출 혹은 배 출되며, 이러한‘물질은 골판지 원지의 강도 발현에 더욱 악영향을 미칠 것으로 판단되었다. 미세분으로 구성된 SS의 경우 이미 많은 연구를 통해 특성이 파악되었기 때문에 본 연구에 서는 ss를 제외한 공정수를 두 가지로 크게 나누어 고려하였다. 즉, ss로 측정되지 않지만 닥도를 유발할 수 있는 미세 무기물질과, 용해성의 무기염, 첨가제 및 추출물 둥으로 이루어 진 용해성 성분으로 나누어 분석하였으며, 또한 각각이 초지 특성에 미치는 영향을 살펴보 고자 하였다.을 해석코자 하였으며, 그 방법으 로 수치해석기법을 도입하였다. 또 실제 캘린더링 전후의 두께 변화를 측정하여 유리전이온도 의 도달 깊이와 비교하였다. 지필의 압축 정도는 롤의 직경과 닙 폭을 이용하여 MD 방향으 로 함수화하였으며, 열전달 계수로는 겉보기 값을 사용하였다. 이때 지펼은 균질한 것으로 가 정하였다. 함수율은 유리전이온도를 좌우하는 가장 큰 인자이나 본 연구에서는 항온항습처리 를 통해 유입지의 함수율을 고정시켰으며 캘린더링 시 함수율의 변이는 없다고 가정하였다. 그 결과 열침투깊이가 증가할수록 지필은 보다 변형되기 쉬운 상태가 되어 주어진 압력 조건에 대해 소성변형 정도가 증가하는 것으로 나타났다. 이는 캘린더링 전후에 두께 변화를 측정하여 정량적으로 평가할 수 있었다. 수치해석기법을 통해 같은 압력 조건에서 온도가 증 가함에 따라 혹은 같은 온도 조건에서 압력이 증가함에 따라 지필 내의 유리전이온도의 침투 깊이가 증가함을 알 수 있었으며 이는 캘린더링 전후의 두께 변화의 측정 결과와 일치하였 다. 또 NRT가 증가함에 따라서도 유리전이온도 침투 깊이가 증가하였다.합편에 비해 일부 우수한 양상을 보였지만 본 실험의 범위내에서는 통계적 정량적 차이를 제시할 수는 없었다. 향후 보다 광범위한 동물 실험이 필요할 것으로 사료된다.된다.하고도 완전교정술 도달 확률이 높은 치료전략이라는 사실을 입증하였으며 주대동맥폐동맥혈관부행지의 크기나 숫자가 단일화하기 쉬운 형태학적 특징을 지닌 경우에는 조기에 일단계완전교정술을 시행하여 양호한 결과를 얻을 수 있다는 사실을 발견하였다. 반면 본 환아군 중 단일화술을 먼저 시도한 군에서는 비록 단계적인 단일화를 시도한 군에서 단일화술과 관계된 수술사망율이 약간 낮기는 하였으나 완전교정술까지 완료될 가능성에는 차이가 없었다. 그러나 이 경우 보다 정련된 적응 환자의 선택을 통한 단일화 우선전략의 시도와 장기 추