• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.269-275
• /
• 1997

Wind tunnel test results and their interpretations, which were performed to study the aerodynamic stability of tower of self-anchored suspension bridge, are presented in this paper. Tower and full models were tested under smooth and turbulent flow conditions. In the case of the tower with inclined two columns, the vibration due to wakes were occurred at wide velocity zone because the wakes with various frequencies were generated by inclined upstream column. It has to be emphasized that the vibration characteristics of the tower in the self-anchored suspension bridge may be very sensitive to the longitudinal boundary conditions of the girder at the supports. Because of the two natural frequency of the tower, out-of-plane bending and torsional, were not well separated, coupled motions were observed in a wide range of wind velocity. The effectiveness of corner cut, countermeasure to reduce the tower vibrations, was also studied. It has been found that 1:10, comer cut size to column width, may be the most effective ratio for reducing the vibrations.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.376-384
• /
• 2017

Color therapy is a diagnostic method for treating psychological problems using unique vibration and frequency color. The color has strong subjective psychology, it can give psychological stabilization effect as a spring as a favorite color and stability become personally personal. Also, to give various influences on emotion, we can obtain information via brain wave to evaluate these emotions. In this research, before viewing two kinds of VR color images of red and blue, responding to the stress questionnaire(BEPSI-K) via a mobile terminal. At this time, we analyzed the real-time we used four emotional data measurable via brain waves and grasped the user's emotional state. In addition, the stress questionnaire was used to quantify the emotion degree, and comparative analysis was made on how the color image affects the change of emotions with 3D virtual reality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.108-114
• /
• 2018

Due to the development of nondestructive testing techniques, methods of inspecting cracks in mechanical parts have drawn attentions. Among various non-destructive testing methods the acoustic resonance method which analyzes the natural frequencies has been developed into a technique suitable for the prompt judgements of the existence of the defects in the mechanical parts. In this study, we investigated the crack inspection technique to examine the cracks in the yoke tubes by using the acoustic resonance method and realized the system to quickly detect the cracks. A 24bit ADC circuit and an MCU were installed for the smooth data collection, and a TCP / IP communication interface was configured for the data communication with PC. We used a microphone as a sensor measuring the vibrations. We constructed an analysis software to obtain the frequency spectra of the vibrations, to find the existence of the cracks, and to feedback to the user. Tests were conducted using the yoke tubes manufactured in the real industrial field. The tests were successfully conducted to distinguish the good products from the defective (cracked) products and confirmed that they can be employed in the actual industrial field.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.669-676
• /
• 2016

North Korea has various ballistic missiles from short range to long range such as inter continental ballistic missiles. Short range ballistic missiles such as SCUD series are threatening to Korea peninsula. Therefore Korea is constructing various missile defense systems to protect country. Parameters influencing the received power from the target to the radar are transmitting power, antenna gain, carrier frequency, RCS(Radar Cross Section) of target and distance from radar to target. Especially, RCS and distance from target are not radar performance defined parameters but external parameters. Therefore radar deployment position that large RCS can be observed and target to radar distance should be considered in parallel to improve target detection probability. In this paper, RCS pattern of SCUD-B ballistic missile is calculated, received power is analyzed based on radar deployment position during ballistic missile trajectory and methode for optimum radar deployment position to improve target detection probability is suggested.

• The KIPS Transactions:PartD
• /
• v.17D no.3
• /
• pp.193-202
• /
• 2010

Recently, there have been several researches on automatic object identification and distributed computing technology to realize a ubiquitous computing environment. Radio Frequency IDentification (RFID) technology has been applied to many business areas to simplify complex processes and gain important benefits. To derive real benefits from RFID, the system must rapidly implement functions to process a large quantity of event data generated by the RFID operations and should be configured dynamically for changing businesses. Consequently, developers are forced to implement systems to derive meaningful high-level events from simple RFID events and bind them to various business processes. Although applications could directly consume and act on RFID events, extracting the business rules from the business logic leads to better decoupling of the system, which consequentially increases maintainability. In this paper, we describe an RFID business aware framework for business processes in the Electronic Product Code (EPC) Network. This framework is proposed for developing business applications using business services. The term "business services" refers to generated events that can be used in business applications without additional data collection and processing. The framework provides business rules related to data collection, processing, and management, and supports the rapid development and easy maintenance of business applications based on business services.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2
• /
• pp.104-112
• /
• 2003

The in-duct acoustical sources of fluid machines are often characterized by the source impedance and strength using the linear time-invariant model. However, negative resistances, which are physically unreasonable, have been found throughout various measurements of the source properties in IC-engines and compressors. In this paper, the effects of the time-varying nature of fluid machines on the source characteristics are studied analytically. For this purpose, the simple fluid machine consisting of a reciprocating piston and an exhaust is considered as representing a typical periodic, time-varying system and the equivalent circuits are analyzed. Simulated measurements using the analytic solutions show that the time-varying nature in the actual sources is one of the main causes of the negative source resistances. It is also found that, for the small magnitude of the time-varying component, the source radiates large acoustic power if the piston operates at twice the natural frequency of the static system. or integral submultiples of that rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.92
• /
• pp.102-112
• /
• 2005

In this work, we developed fully integrated broadband MMIC chip set employing CSP(Chip Size Package) for K/Ka band applications. By utilizing an ACF for the RF-CSP, the fabrication process for the packaged amplifier MMIC could be simplified and made cost effective. $STO(SrTi_{3})$ capacitors were employed to integrate the DC biasing components on the MMIC, and LC parallel circuits were employed for DC feed and ESD protection. A pre-matching technique and RC parallel circuit were used to achieve a broadband matching and good stability fer the amplifier MMIC in K/Ka band. The amplifier CSP MMIC exhibited good RF performance over a wide frequency range in K/Ka band. This work is the first report of a fully integrated CSP amplifier MMIC successfully operating in the K/Ka band.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.301-301
• /
• 2010

현재 전 세계는 앞으로 사용 될 대체 에너지에 많은 관심 가지고 있다. 지금 사용하고 있는 에너지 연료는 한정되어 있기 때문에 대체에너지에 대한 연구가 활발히 진행 되고 있다. 그 중 압전체를 이용한 에너지 하베스팅은 많은 주목을 받고 있다. 주변 환경에서 필요한 에너지를 끌어 쓸 수 있는 대표적인 청정에너지 시스템 중 하나이기 때문이다. 최근 전원 공급원으로써 에너지 수확 시스템은 현 사회에 사용되고 있는 배터리로 전원을 사용하는 제품들을 소용량과 저전압 분야에서의 에너지 수확의 원리를 이용하여 전기전자제품의 사용시간 연장 및 응용분야 확대를 시도하는 연구가 활발히 수행되고 있다. 압전세라믹스를 이용한 에너지 하베스팅은 진동에너지를 전기에너지로 변환하는 것으로서 압전 특성이 높아야 한다. 일반적으로 압전 세라믹스는 PbO 성분이 들어가므로 환경적 오염 뿐만 아니라 인체에도 영향이 좋지 않으므로 많은 나라에서 이러한 성분을 제한하고 점차적으로 줄어들고 있는 시점에서 PbO를 사용하지 않고 Lead-Free 세라믹를 사용한 연구가 진행되고 있다. 이 논문에서는 일반적인 소결 방법을 이용하여 (Na,K)NbO3 세라믹에 CeO2를 첨가한 압전 세라믹을 제작하였다. 제작된 압전 세라믹스로 에너지 하베스팅 소자를 제작하고, 이 소자로 수확된 에너지로 DC-DC Converter 응용 특성에 대하서 연구하였다. 압전 세라믹스의 좋은 압전 특성을 출력하기 위하여 캔틸레버의 고유 진동수가 진동원의 주파수와 일치하는 공진을 일으켜야 한다. 따라서 구동회로는 주파수원을 찾아 설계하였고, 압전 세라믹스의 진동은 가진기를 이용하여 구동실험을 하였다. 지금까지 나와있던 에너지 하베스팅 회로와 비교하여 그 특성을 분석하고, 시뮬레이션 및 실험을 통하여 검증하였다.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.179-184
• /
• 2017

The cage of a tapered roller bearing keeps the gap between the rollers, which prevents friction, wear and suppresses heating. The material of the cage is changing from metal to plastic for lightening the weight. If the cage is severely deformed due to resonance, the roller may not be able to roll and even get off the cage. In this paper, the dynamic characteristics of the cage is analyzed according to the cage material. Under the assumption that a train runs at the highest speed, frequency harmonics of that speed is calculated, and the comparative analysis is carried out in order to select the optimum thickness of the cage, which is easy to change among the cage design variables for avoiding the resonance.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.71-80
• /
• 2005

This paper proposes a new circuit topology of the half-bridge resonant inverter and presents its digital control scheme. As the proposed half-bridge inverter can be operated in the load-freewheeling modes, pulse width modulation (PWM) control method can be used for the output power control. The proposed half-bridge inverter can keep unity output displacement factor under the load-impedance varying conditions, if a new PWM control scheme based on the resonant frequency tracking algorithm is adopted. In this paper, the operation principle, electrical characteristics and detailed digital control scheme of the proposed half-bridge resonant inverter and loss analysis comparing with a conventional half bridge inverter is described. The experimental results of the proto-type experimental setup to verify the validity of the proposed half-bridge resonant inverter are presented and discussed.