• The KSFM Journal of Fluid Machinery
• /
• v.14 no.5
• /
• pp.39-47
• /
• 2011

Flow control range of valve, which is installed on pipeline, varies according to valve type, pipe diameter, pipe length, roughness, and elevation difference of both ends of pipeline. A lot of computation efforts and knowledge are needed to estimate flow control range of valve, considering above many parameters. The table of flow control range of each valve type is presented for convenience of pipeline design engineers who must make decision of valve size and type in this study. Also the reason that butterfly valve is recommended for flow control, and gate valve is forbidden is presented via quantification and figures in this study.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.6
• /
• pp.11-17
• /
• 2011

The cause of waterhammer phenomenon due to valve closing which is installed on pipeline is clarified in this study. Also if waterhammer phenomenon occurs on simple pipeline, expensive facilities like pressure relief valve is adapted to protect pipeline from waterhammer so far. But this study shows that waterhammer phenomenon can be suppressed by just simple modification of valve control sequence, and this technique is verified by simulation and site experiment.

• ETRI Journal
• /
• v.14 no.4
• /
• pp.236-248
• /
• 1992

본 고에서는 국내 신호망에 사용될 NO.7 신호방식을 채택한 신호중계교환기 SMX-1 시스팀의 메시지전달부(MTP)중 레벨2 신호링크 기능에 대한 소프트웨어의 설계 및 구현에 대하여 기술하였다. SMX-1 시스팀내에서 요구하는 레벨2 신호링크의 기능은 NO.7 신호방식-메시지전달부 국내기준안에서 제시한 신호링크 고유기능, 고신뢰도가 만족되도록 설계된 SMX-1 시스팀의 유지보수기능, SMX-1 시스팀 운용시 망상태 파악 및 가용도 등을 파악하기 위해 필요한 측정 및 감시 기능들이 구현되었다. 또한 신호링크 고유기능중에서도 설계자 구현 의존 사항들인 신호 전송로 차단때의 감지 기능, 신호링크 폭주 기능, 옥텟계수 모드 처리기능, 긴 메시지 수신처리 기능 등이 구현되었다. 구현 완료된 신호링크기능이 NO.7 신호방식-메시지전달부 국내기준안에서 요구하는 메시지전달부 신호전송성능의 신호트래픽 처리용량을 만족하는지를 확인하기 위하여 NO.7 프로토콜 분석기를 통하여 시험하였으며 그 결과를 분석 및 기술하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.213-219
• /
• 2006

Interference occurs by signals received from directions that were different from the signals of the users in a mobile communication system. Various studies have been undertaken, including diversity, equalizer, etc., in order to reduce interference. In this study, the weighted value of the array antenna was obtained to improve signal-to-noise ratio. The weighted value was obtained as an eigen value and an eigen vector by using the correlation coefficient of the signal. The weighted value obtained was then applied to the CDMA system to increase system performance and capacity. Both QPSK and OQPSK modulation systems were applied to analyze performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.735-740
• /
• 2008

The Design manual for adjusting the capacity and LOS of facilities has been shared in urban railways and high-speed railway stations. However, the pattern of urban railways users and those of high-speed railway users are different from each other. For an example, the high-speed railway users tend to carry voluminous luggages and the transportation disadvantaged such as children and the elderlies. Accordingly, we see that the scale of facilities and the station itself should be constructed differently. The transfer facilities in the high-speed railway stations are classified widely into walking assisting facilities and convenient facilities. We invented the concept of PME (Pedestrian Moving Equivalent) and PWE (Pedestrian Waiting Equivalent)for the spatial calculation of those who are with wheeled luggages, back packs, and children to reflect the uniqueness of users in high-speed railway stations. These equivalents have been applied to the design of the facilities to asses the new Capacity and LOS that are users' favored.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.4
• /
• pp.326-332
• /
• 2015

Greenhouse-gas emission factors are widely used to estimate emissions arising from a defined unit of a specific activity. Such estimates are used both for international reporting to the United Nations Framework Convention on Climate Change (UNFCCC) and for a myriad of national and subnational reporting purposes. The Intergovernmental Panel on Climate Change (IPCC) provides a methodology for national and sub-national estimation of known greenhouse gas emissions including $N_2O$ for each sector from which the emissions arise. The objective of this study was to develop an emission factor to estimate the direct $N_2O$ emission from an agricultural field cultivated with Chinese cabbage during spring season in 2010-2012. An estimated emission factor of $N_2O$ calculated over three years from field experiment accounting for cumulative $N_2O$ emission, nitrogen fertilization rate, and background $N_2O$ emission was $0.0056{\pm}0.00254$ (95% CI) Kg $N_2O-N/kg$ N. More extensive studies are needed to develop $N_2O$ emission factors for other upland crops in various regions of Korea because $N_2O$ emission is influenced by many factors including climate characteristics, soil properties agricultural practices and crop species.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.344-349
• /
• 1995

셀구조물은 선박, 항공기, 우주선 등의 산업분야에 자주 사용되는 중요한 구조요소로서, 이에 대한 연구도 공학적 필요성에 의해 많은 연구가 진행되어 왔다. Maddox등의 Rayleigh-Ritz법, Srinivasan and Bobby의 적분방정식 기법, Petyt의 유한요소법, Irie, Henderson등의 전달매트릭스법, 그 외 Webster, Petyt and Deb Nath, Blevins, Srinivasan and Krishnan등에 의해 여러가지 해석방법의 진동해석이 행해져 왔다. 현재 주로 사용되고 있는 매트릭스 구조해석 및 진동해석 방법으로는 유한요소법과 전달매트릭스법을 들 수 있다. 유한요소법은 범용적인 해석 프로그램의 개발은 수월하지만 대규모의 선형 연립방정식의 해법에 귀착되므로, 기억용량이 큰 대형컴퓨터가 필요하고, 반면 전달매트릭스법은 기억용량이 적은 퍼스널컴퓨터로도 계산수행이 가능하나 고차의 고유진동수를 구할 경우나, 중간에 단단한 경탄성지지가 존재할 경우 등에는 수치계산상의 문제점이 지적되고 있다. 이에 대한 대책으로, 상태변수를 바꾸어 넣은 Riccati방법, 각 절점의 기지의 상태변수를 제거하는 Frontal법, 전달매트릭스와 강성매트릭스를 결합시키는 방법 등이 보고 되고 있다. 이에 자자들은 퍼스널컴퓨터 이용에 적합한 고속, 고정도의 구조해석 및 진동해석 기법으로 전달영향계수법을 제안하여, 원판구조물, 사각판구조물, 원통형 셀구조물 등의 여러가지 형상구조물의 자유진동 해석에 적용해서, 종래의 전달매트릭스법에 비해 계산정도 및 계산속도의 양면에서 매우 우수함을 보고한바 있다. 본 연구에서는 동적영향계수의 축차전달에 그 개념을 두고 있는 전달영향계수법을 좀 더 일반화시키고 체계화시키기 위하여 탄성지지를 갖는 셀구조물에 적용하여 자유진동 해석 알고리즘을 정식화한 후, 간단한 모델에 대한 수치실험을 통해서 전달 영향계수법으로 구한 해를 전달매트릭스법의 결과와 비교.검토하여 본 방법의 유용성을 확인하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.155-166
• /
• 2016

It is important to configure capacitance(C) of the capacitor and the induction coefficient(L) of the work coil on the resonant circuit design stage in order to induce heating on the object by a precise and constant frequency components in the electromagnetic induction heating equipment. Work coil conducts a direct induction heating according to heating point and area of the object which has a fixed heat factor so that work coil is designed to has fixed value. On the other hands, Capacitor should be designed to be changed in order to be the higher the utilization of the entire equipment. It is extracted the samples by variation of single electrode capacity from the selection stage of raw materials for capacity to the stage of process design for output of the high frequency LC resonance of 700kHz on 1000 VAC maximum voltage and current to $200I_{MAX}$. It is suggested fundamental experiment results in order to prove relation for the optimal design of HF-LC resonance conduction-cooled capacitor based on the response of frequency characteristics and results of output parameters according to variation of the capacitance size.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.91-98
• /
• 2007

This paper presents the induced mathematical modeling equations for evaluating the operation stability with automatic transmission of heavy duty vehicle. This theoretical approach indicates that linearized governing equations of system can be converted into eigen-value problems. if the eigen-value has positive number, we can predict the engine operating point locates an unstable operating region. To be a stable state, the unstable operating point diverges toward a stable point which is able to maintain uniform velocity. Based on the previous theoretical analysis, we carry out dynamic simulation to show the behavior of engine operating point and torque converter in transient state. As a result of the dynamic simulation, the suggested theoretical method is found to be reasonable for evaluating the operation stability of a torque converter. In addition, the numerical results explain the engine stops and fluctuating phenomenon in reality.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.179-184
• /
• 2013

BACKGROUND: Accurate estimates of total direct $CH_4$ emissions from croplands on a country scale are important for global budgets of anthropogenic sources of $CH_4$ emissions and for the development of effective mitigation strategies. Methane production resulted by the anaerobic decomposition of organic compounds where $CO_2$ acts as inorganic electron acceptor. This process could be affected by the addition of rice straw, water management and rice variety itself. METHODS AND RESULTS: Rice (Oryza sativa L. Japonica type, var Samkwangbyeo) was cultivated in four plots: (1) Nitrogen-Phosphorus-Potassium (NPK) ($N-P_2O_5-K_2O$:90-45-57 kg/ha); (2) NPK plus 3 Mg/ha rice straw (RS3); (3) NPK plus 5 Mg/ha rice straw (RS5); (4) NPK plus 7 Mg/ha rice straw (RS7) for 3 years (2010-2012) and the rice straw incorporated in fall (Nov.) in Gyeonggi-do Hwaseong-si. Gas samples were collected using the closed static chamber which were installed in each treated plot of $152.9m^2$. According to application of 3, 5, 7 Mg/ha of rice straw, methane emission increased by 46, 101, 190%, respectively, compared to that of the NPK plot. CONCLUSION(S): We obtained a quantitative relationship between $CH_4$ emission and the amount of rice straw applied from rice fields which could be described by polynomial regression of order 2. The emission scaling factor estimated by the relationship were in the range of IPCC GPG (2000).