• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1019-1024
• /
• 2005

To research effects of various chemical superplasticizers(Lignosulfonic acid, Naphthalene sulfonated formaldehyde condensate, melamine sulfonated formaldehyde condensate, and Polycarboxylate) on the hydration of cement, experiments involving XRD, SEM, and DSC have been analysed with cement paste specimens. Regardless of types and dosages of superplasticizers, hydration reaction of specimen applied superplasticizer was delayed to 3 day, but then it showed similarity to plain which don't add superplasticizer. Moreover, the hydrating rate of cement paste was retarded as dosage of superplasticizer was increased. Also, kinetics related with hydrate of cement paste was slow in order of lignosulfonic acid, polycarboxylate, melamine and naphthalene sulfonated formaldehyde condensate. Nevertheless, when all kinds of chemical admixtures were used, morphologies of these hydrates were denser and more uniform than those of plain.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.811-818
• /
• 2005

It is well known that the fluidity and the fluidity loss of fresh concrete are affected by the kind of organic admixtures. Organic admixture can improve the properties of concrete. Sulfonated Naphthalene-Formaldehyde(SNF) Superplasticizer is used representatively, but has a problem in fluidity loss. In this study, we synthesized the Sulfonated Melamine-Formaldehyde(SMF) superplasticizer at the various synthetic conditions and compared the physical properties with SMF superplasticizer. SW superplasticizer is synthesized with four synthetic steps. Step 1 is hydroxymethylation, Step. 2 is Sulfonation, Step. 3 is Polymerization and Step. 4 is Stabilization. Synthesis of SMF superplasticizer depends on pH, temperature and reaction time. In this reaction, we changed the mole ratio of melamine to formaldehyde at 1:3, 1:4, and the amount of acid catalyst at Step. 3. After application of SMF superplasticizer and its mixture with SNF superplasticizer to cement pastes and mortars, we measured the physical properties of them at the different dosages(0.5, 1.0, 1.5 wt%) to cement. All samples including superplasticizer showed higher compressive strengths and slump, smaller pore size and porosity than CEM

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.203-204
• /
• 2010

In this study, We synthesized new generation of superplasticizer(SP) which show a shrinkage reducing effect as well as water reducing effect with adequate slump retention in a wide range of water cement ratio by introduction a shrinkage-reducing group into the molecular structure. To investigate effects of the SRS on the hydration of cement, DSC have been analysed. Also the general and shrinkage properties of the concrete were evaluated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.457-460
• /
• 2008

It was predicted that the most recent technological developments in concrete technology rely on enhanced admixture efficiency rather than on improvement in cement manufacturing. Four major commercially available of organic chemical admixtures are modified lignosulfonates (LS), sulfonated naphthalene-formaldehyde resins (SNF), sulfonated melamine-formaldehyde resins(SMF) and polycarboxylate(PC). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps and reaction conditions such as the mole ratio of melamine to formaldehyde was changed. After application of SMF superplasticizer to cement concrete, the physical properties including workability, slump loss, compressive strength were compared with SNF

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.815-821
• /
• 2005

Three major commercially available organic chemical admixtures are modified lignosulfonates (LS), sulfonated naphthalene-formaldehyde resins (SNF) and sulfonated melamine-formaldehyde (SMF). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps including hydroxymethylation (Step 1), sulfonation (Step 2), polymerization (Step 3) and neutralization and stabilization (Step 4). In this synthesis, mole ratio of melamine to formaline and the amount of acid catalyst used were varied. The obtained SMF superplasticizers were applied to cement paste and mortar and their physical properties including workability, slump loss, compressive strength were investigated. Also their hydrate shapes were investigated by examining SEM images of the cured paste. It was found that the fluidity properties of cement were significantly influenced by the structure of SMF condensates.

• Cement Symposium
• /
• no.31
• /
• pp.52-58
• /
• 2004

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.146-159
• /
• 1984

This study was the contrast of the compressive strength, the tensile strength, the reducing ratio and the flow of mortar using dispersing agent and high fluid admix. 1. The admix ratio of chemical admixtures espressing maximum strength appeared the same result high fluid admix SP was 0.6%, the dispersing agents LG and C211 were 0.2%, SK was 0.3%, C376 was 0.5%. But two or three times more than standard quantity made the strength's fast lowness, which influenced bad to wateriness and retard the soli-dification. 2. When proper quantity of chemical admixture was used, the increment of compressive strength was as follows. High fluid admix SP was 40.7% and the average increasing rate of dispersing agents(C211 was 19.5%, LG was 19.1%, C376 was 17.9%) was 18.7% more than normal mortar in the codition of 7 days. Also, in the condition of 28 days, high fluid admix SP was about 24.4% and the average of dispersing agents(LG was 21.1%, C211 was 16.4%, SK was 11.1%, C376 was 7.6%) was 14.1%. 3. When proper quantity of chemical admixture was used, the increment of tensile strength was as follows. High fluid admixture SP was 26.6% and the average increasing agents(SK was 16.0%, C376 was 14.7%, LG was 10%, C211 was 5.8%) was 11.6%. Also, in the condition of 28 days, high fluid admix SP was 16.5% and the average increasing rate of dispersing agents(LG was 19.1%, SK was 10.6%, C211 was 10.1%, C376 was 8.7%) was 12.1%. 4. As for the reducing ratio of each dispersing agent, he flow of mortar was less than the slump of concrete. That is; the reducing ratio of concrete was 15% adding each dispersing agent, but the reducing ratio of mortar was in the range of from 5.8% to 13.5% in 1 : 1 mixture, from 7.6% to 14.2% in 1 : 2, from 9.5% to 18.8% in 1 : 3. 5. The fluidity of each chemical admixture was as follows. High fluid admix SP in the condition of 1: 1 and 1 : 2 showed the best result than other dispersing agent and 1 : 3 showed the same result like other agents. Therefore these good dispersing agents were suitable in the prepact concrete construction using intrusion mortar.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.300-302
• /
• 2001

폴리카본산계 기능성 고분자를 합성해서 고성능 감수제 원료로 활용하여 고유동화 혼화제를 개발하고자 한다. 폴리카본산계 기능성 고분자를 합성한 후, 이를 고유동, 고강도 혼화제 원료로의 제반 물성을 확인하고, 이를 현장에 적용하여 현재의 제품을 획기적으로 개선하고, 혼화제 품질의 우위성을 확보하기 위해 1) 시멘트 및 골재 표면에서의 적절한 계면활성을 갖는 분자설계를 하였으며, 2)분자량의 조절 기술의 개발을 개발하였다. 합성에 있어서 첫째, 시멘트 및 골재 표면에서의 적절한 계면활성을 갖는 분자설계와 둘째, Mw 5,000정도의 분자량을 갖는 감수제의 합성기술을 개발하였다. 이렇게 제조된 고성능 유동화제의 화학구조 해석을 해석하고 분자량 및 분자량 분포를 측정한 다음, 시멘트 페이스트의 유동성, 점도, 슬럼프로스 등을 측정하여 고성능 유동화제의 성능인 시멘트 페이스트의 유동성을 시험하였다. 그 결과 고유동성을 갖는 것과 장시간 안정한 유동성을 나타내었으며, 경과 시간에 따른 겉보기 점도변화를 측정한 결과 점도의 상승이 초기에 일어나다가 시간의 경과에 따라 점도가 감소하는 경향을 나타내었다. 따라서 경과시간에 따른 유동성 손실을 억제할 것으로 기대한다.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.3
• /
• pp.149-156
• /
• 1997

In order to improve compressive strength of cement mortar, powder admixture(FAS) was mmufactured by mixing fly ash. Il-anhydite and silica hume, and superplasticizer was used for the control of fluidity reduction with the use of this admixture. Cement was substituted by 10, 20wt% of FAS respectively. At W/S = 0.40, the fluidity of' cement paste substituted by PAS was decreased. NSF and NT-2 were very effective fbr the control of fluidity reduction. As the particle size of U -anhydrite was fine, the fluidity of cement mortar was increased. The fluidity reduction of cement mortar substituted by 10wt% of FAS was controlled. The compressive strength of cement mortar substituted by 10wt% of FAS showed higher. value than that of 20wt%, expecially specimen(C1) substituted by 10wt% of $\gamma$ had the highest compressive strength value.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.257-260
• /
• 2003

아마미오오시마는 아열대 고립지역으로 많은 고유종이 확인되었다. 이를 장래 경제성이 있는 이도(離島)육성의 일환으로 도로를 개설하게 될 경우 이곳 제 환경에 동화될 수 있는 조건이 전재하여야 한다. 따라서 개설구간 각 요소별로 시설계획을 수립하고 수혜주민들과의 충분한 이해 성립이 요구된다.