• Korea journal of population studies
• /
• v.25 no.2
• /
• pp.69-105
• /
• 2002

This paper is aimed at three points. Firstly the size and trend of women self-employed in korea are analysed during 30 years. Second the demographic characteristics and labor condition like working hour, income and etc. of them are presented. Last, when did they begin or end their own work as their life stages were changed.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.04a
• /
• pp.101-122
• /
• 2007

In this study, as the result of analyzing the relationship and influence between economic outcome and R&D supporting investment, the number of supporting subjects among the technological innovational areas of SMEs, it is as below. First, as the economic result of analyzing companies from the investment in R&D of technological innovational areas of minor companies, the number of supporting subjects and amount of R&D have relationship with increase of sales and export amount, employee reduction & the effect of new job creation shows positive correlation with the effect of import replacement. Second, as analyzing the influence of the investment in R&D has economic effect from of technological innovational minor companies. This is thought that the financial and R&D support increase a significant effect on economical, technical against SMEs.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.63-72
• /
• 2011

The high capacity bi-directional pile load test is an optimum pile load test method for high-rised buildings. Especially, a high pressure and double-acting bi-directional pile load testing, a special type of the high capacity bi-directional pile load test, is the most practical way to overcome limitations of loading capacities and constraints of field conditions, which was judged to be a very useful test method for requiring high loading capacities. Total of 2 high capacity bi-directional pile load tests(P-1 and P-2) were conducted in high-rised building sites in Korea. Based on the field load test results, the sufficiency ratio of loading capacities to design loads for P-1 and P-2 were 3.3 and 2.1, respectively. For P-2, the load test could not verify the design load if 1-directional loads applied slightly smaller than the actual applied load. Also, high capacity bi-directional pile load tests were difficult to determine an ultimate state of ground or piles, although the loads were applied until their maximum loads. Hence, finite element analyses were conducted to determine their ultimate states by calibrating and extrapolate with test results.

• 한국사회정책
• /
• v.20 no.2
• /
• pp.261-304
• /
• 2013

This article is aiming intensively to analyze the polarizing tendency of labour market and social integration. The polarization of labour market is being regarded as one of the hottest issues not less important than those problems of economic growth, employment, income distribution and national security etc. in the national policy. In this article, we will first follow up the important phenomena of labour market polarization and the background as well as its consequence. Especially, it asks if the present labour policy in the new government which is now being concentrated on the improvement of employment rate(from the present 63% to the 70% in the future) could deserve to diminish the polarization of labour market in korea. At one side, this article makes the special attention on the diversifying tendency of labour market and the various phenomena of fragmentation and segmentation in the labour market according to the forms and types of employment and according to the employee's status as much as the company's size. At the other side, it emphasizes that to overcome the polarization of labour market should require the wide reform from the legal measure to the improvement of the wage system, and the qualification system and the social investment as well as the human resource development. Furthermore, this article stresses the importance of integrative approach between the active market policy and the social policy instead of choosing each policy option, seperatively.

• Korean Journal of Social Welfare Studies
• /
• v.41 no.2
• /
• pp.279-308
• /
• 2010

This study examines the association between family policies and family gap using data for 14 OECD countries. As family policies have different assumptions about women's roles and include variant sub-policies, this study identify two distinct family policies: 'employment support policy' to support women as employed workers and 'caregiving support policy' to support women as caregivers. Meanwhile, women's wage cannot be determined by the effect of 'only' family policy. Therefore, analysis model includes variant macro structure supposed to affect women's labor status and wage, like labor market structure, wage structure(compression), women's social status and economic status, and examines interaction effects between family policies and these labor market and social structures using Fuzzy-Set Qualitative Comparative Analysis (FSQCA). The FSQCA result shows that relatively low family gap is associated with the conjunctual causation of developed 'employment support policy' and compressed wage structure.

• Korean Journal of Food Science and Technology
• /
• v.37 no.1
• /
• pp.103-107
• /
• 2005

Immunomodulatory activities of crude ${\beta}$-glucans extracted from oat bran under different conditions, fractions A ($55^{\circ}C,\;5%,\;pH\;6$), B ($45^{\circ}C,\;15%,\;pH\;6$), C ($50^{\circ}C,\;20%,\;pH\;7$), D ($50^{\circ}C,\;0%,\;pH\;7$), and E ($50^{\circ}C,\;10%,\;pH\;9$) were investigated. All crude ${\beta}$-glucan fractions stimulated macrophages, producing nitric oxide dose-dependently, and, efficiently promoted nitric oxide production in presence of IFN-${\gamma}$. Except for fraction C, in vivo test indicated fractions B, D, and E (100 mg/kg) substantially enhanced carbon-phagocytic indices of blood macrophages by oral administration of crude ${\beta}$glucan for 7 days prior to carbon injection. These immunomodulatory effects could be determined with extraction conditions of crude ${\beta}$-glucan.

• Journal of Biomedical Engineering Research
• /
• v.20 no.6
• /
• pp.539-546
• /
• 1999

현재 상용화되고 있는 치과용 76.5% Pd-11.2% Cu-7.2% GarP 합금의 왁스모형을 원심주조기로 주조하여, 임상조건의 탈개스 및 세라믹 소성처리를 하였다. 이에따른 각각의 시편에 대해 미세조직의 변화를 주사전자현미경 및 EDS로 관찰하고, 최종적인 투과전자현미경으로 조사하였다. 각 조건의 편석, 결정립계 및 석출물부위를 주사전자현미경과 EDS 고 관찰한 결과, 이원계 Pd-GA합금의 안정상들에 해당하는 정량적인 조성비는, 단지 상대적으로 Ga의 성분비만 높게 감지되었다. 특히, 세라믹소성 처리후 미세조직에서 형성된 석출물에 근접한 기지조직일수록 Ga의 농도가 상대적으로 줄어든 고갈현상을 확인하엿다. 또한 투과전자현미경의 제한시야회절도형 분석결과, 주조 및 탈개스처리 후 미세조직의 편석부위에서는 GA의 가장 큰 강도를 보였고, 또 Ga과 Pd 고용체 사이에 미세한 판상의 석출물에 기인하는 줄무늬를 관찰하였다. 한편, 세라믹소성처리후 미세조직의 석출물은 금속간화합물 Pd2Ga으로 밝혀졌으며, 기지조직은 <100> 방향을 따라 약 25nm의 폭을 가지는 미세한 섬유상 형태의 소위 "tweed 조직'을 형성하였다.성하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.138-138
• /
• 2016

의료용 공구로 사용되는 합금은 마르텐사이트계 스테인리스강의 대표 강종인 420스테인리스강이 사용되며, 이 합금은 고온의 오스테나이트 상태에서 ?칭하면 마르텐사이트 조직으로 변태하여 현저하게 경화하는 특징을 가지고 있으며, 오스테나이트화 후 템퍼링시 우수한 기계적 성질이 얻어진다. 그러나 템퍼링 온도의 영향으로 석출탄화물이 형성되어 기계적 성질이나 내식성이 저하되는 단점이 있다. 본 연구에서는 STS 420스테인리스강의 템퍼링 온도에 의한 내식성 문제점을 개선시키기 위해 STS630 합금을 사용하여 다양한 석출 열처리 조건 및 플라즈마 질화공정을 연구하였다. 구입한 소재의 균일한 성분 조정을 통한 미세 편석 및 물성부여를 위한 균질화 조건 도출 열처리를 실시하였으며, STS630의 고용화열처리는 오스테나이트 균일조직이 되는 온도영역으로 가열하여 급냉하는 것으로 마르텐사이트 변태시키는 열처리를 진행하였으며, 열처리온도는 $1020{\sim}1060^{\circ}C$로 설정하였다. 석출경화 열처리는 $460{\sim}480^{\circ}C$와 $500{\sim}520^{\circ}C$의 온도에서 실시, 제품에 따른 인성을 부여하였으며, 질화공정은 플라즈마 장비를 이용하여 플라즈마 가열 ${\rightarrow}$플라즈마 이온질화를 통하여 가장 최적의 공정을 도출하였다.- 질화가 마무리 된 시료는 내식성 및 물성 평가를 통해 제품으로서의 특성을 평가하였다. 석출경화 열처리에 의해 STS420합금에 버금가는 인장강도 및 경도값이 나타났으며, 플라즈마 질화에 따라 물성 값의 향상이 나타났다. 용출실험결과 STS420합금의 경우 Fe, Cr원소의 용출이 나타나며 변색이 형성되었으나 STS630합금의 경우 그 현상이 미미하였다.

• Journal of Nutrition and Health
• /
• v.33 no.1
• /
• pp.86-101
• /
• 2000

Various kinds of living circumstances are making population structure of Korean changed. That is, number of the children is decreased and that of the aged is increased. It is predicted that population of the children and the aged will be almost same until 2020. With above, as the expectation of the aged on healthy living might be increased, some special programs for the aged will be needed strongly. At this point, Korean aged population might be economically poor, comparing with other generation. In general, economic factor affects the subjective living-satisfaction and health status of them. Moreover, educational status, household shape and family tieing also affect their health status. According to the foreign articles, health status of the aged might be related to income, educational status, job, employed or/not, marital status, family structure, sex, and childhood condition. decrease of the income or unemployment could make the death rate of the aged higher. During childhood, discordance among the family might affect their health status after. IGUR is also important factor to affect the adulthood health. Positive life style of the aged would lessen their unequality of the health among them. Nutritional status of the Korean aged population might be indicated under the nutritional recommendation. It is affected by their income, education level, social class, and residing place. (Korean J Nutrition 33(1) : 86-101, 2000)

• Journal of Power System Engineering
• /
• v.16 no.3
• /
• pp.44-50
• /
• 2012

The reliability qualification test is essential in order to ensure the life time of the product under the normal operation conditions when a new product is developed. The reliability qualification test period has an important impact on the development time of new product. Therefore, some researches to reduce the test time of reliability qualification test have been actively studied. Generally, accelerated life test is well known as one method that can save the test time of the reliability qualification test. This test is conducted under the higher stress condition than normal condition. So we need to investigate what factor affects to the higher stress condition. This paper shows the relationship between the acceleration factor and reliability qualification test period. Especially, we focused on the method to obtain effective acceleration factors under the high temperature condition. Through some experiments for a refrigerator's compressor, we were able to confirm how to increase acceleration factors and how to reduce the reliability qualification test period with minimum samples.