• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.640-647
• /
• 1997

Wagnerite ($Mg_2PO_4F)$ was successfully synthesized in a sealed platinum tube and the complete substitutions of $Co^{++}, Ni^{++}, Cu^{++} \;and\;Zn^{++}$for Mg were made in the wagnerite structure. Wagnerite did not decompose until it reached its melting temperature. It was observed that wagnerite underwent only one inversion at $1255^{\circ}C$, prior to melting at $1340^{\circ}C$. The lattice parameters of wagnerites were linearly increased by the substitutions of $Co^{++}$ and $Zn^{++}$ and decreased by the substitutions of $Ni^{++}$ and $Cu^{++}$. The substitutions of wagnerite with $Co^{++}, Ni^{++}$ and $Cu^{++}$ resulted in purple, orange and green colors, respectively, The colors of pigments became more intense and suitable for coloring of glazes and plastics as the amount of metal ions increased.

• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.18-24
• /
• 1993

The phase diagram of the Pt-Sb system was reinvestigated, using the conventional sealedcapsule technique. The identification of phases present in the reaction products was made by reflected light microscopy, X-ray diffraction and electron microprobe analysis. The existence of compounds, Pt5Sb, Pt3Sb, Pt3Sb2, PtSb and PtSb5 was confirmed. A new phase, Pt5Sb with a composition of 83at% Pt and tetragonal structure of the lattice parameters a=3.948(3), c=16.85(1)A, was found. The X-ray powder data of Ptsb may be indexable on a tetragonal cell with a=3.9455(7), c=16.959(5)A. PtSb is stoichiometric up to 800t and becomes Pt-deficient as much as lat% at 1000t. Solid solubility limits of Sb in Pt were determined to be 7.5,10.0 and 6.1at% at 1000˚,800˚ and 600˚ , respectively. The earlier reported Pts Sbf was not found in this study. The liquidus curve between the Ptsb2 and Sb phases was revised.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.200-200
• /
• 2003

고체산화물 연료전지(SOFC)에서 사용되는 연결재의 주 기능은 각 단위 셀의 연료극과 다음 셀의 공기극을 전기적으로 연결하여, 공기와 사용연료의 분리역할을 하기 위하여 사용된다. SOFC용 연결재는 다른 구성요소 소재보다, 높은 전자 전도성, 낮은 이온전도성, 우수한 기계 적강도가 요구되며, SOFC는 고온에서 작동되기 때문에, 상온에서 작동온도까지 다른 요소 소재들과 유사한 열팽창계수와 물리, 화학적으로 안정성이 요구된다. 현재 연결재 제조기술은 EVD, CVD, plasma spraying, tape casting 등 다양하게 연구되고 있으며, 본 연구는 세라믹 연결재 증착방법 중 저렴한 비용으로 대량 생산이 용이한 습식법(dip coaling)을 적용하여, 연료극 지지체식 flat-tube형 고체산화물 연료전지의 지지체를 위해 세라믹 연결재를 제조하고, 그 특성을 연구하였다. 세라믹 연결재로써 선정한 합성조성은 LaCr $O_3$에 Ca이 치환 고용된 L $a_{0.6}$C $a_{0.41}$Cr $O_3$으로 pechini법으로 합성하였다. 합성된 조성은 100$0^{\circ}C$에서 5시간 하소후 가속 Ball Milling하여 0.5$\mu\textrm{m}$의 평균입자크기를 얻을 수 있었다. XRD 상분석결과 perovskite상 (L $a_{1-x}$ Ca/x/Cr $O_3$)과 CaCr $O_4$를 얻을 수 있었다. slurry를 제조하여 막의 밀착성을 증진시키기 위해 sand blasting시킨 flat tube지지체에 진공펌프를 이용하여 소재내부와 외부의 압력차로 dip coating한 후, 140$0^{\circ}C$로 소결 하였다. coating 결과 박리현상은 없었으나, 표면과 단면의 SEM분석결과 다소 porous한 박막층이 형성되었으며, Ca이온이 지지체로 permeation되는 현상이 발생하였다. 이와 같은 결과로부터 보다 치밀한 박막생성을 위해, slurry 제조조건을 변화시켰으며, Ca이온의 migration을 막기 위해 barrier layer를 이용하였다 완전 소결된 지지체는 가스투과도와 전기전도도측정을 통하여 특성을 평가하였다.였다.다.

• The Korean Journal of Applied Statistics
• /
• v.21 no.2
• /
• pp.201-210
• /
• 2008

The government employment statistics show the close comovement of the whole domestic unemployment rate with the youth unemployment rate for the past 10 years, implying the dominant influence of the unemployment of the youth age. This study investigates the structure of the short-run variation and the process of the long-run adjustment in the unemployment rates of the youth and middle ages by formulating the dynamic equation system. The estimation result consistently reflects the vulnerability of the youth class in the aggravation of the employment condition. The effect of exogenous changes is found to be persistent in the unemployment rates of both ages, which appear to have similar structures of the long-run time path. However, the youth unemployment rate turns out to have a relatively long adjustment process to the long-run equilibrium.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.448-459
• /
• 2020

Recently, there has been considerable talk about urban regeneration support centers that are currently promoting urban regeneration projects. The reason is that the role and authority are unclear, and the experience of each local government center is not accumulated, resulting in many trial and error and side effects. This study analyzed the current state of operations of urban regeneration support centers in Chungcheongbuk-do to find desirable ways to operate them in the future. The main findings are as follows. First, the role and division between metropolitan and basic centers and field centers of urban regeneration support centers in Chungcheongbuk-do are unclear. Second, the limitations of the center's operation methods, operational autonomy, and independence are not secured. Third, as a participant in urban regeneration, it has relatively low authority and status compared to administration. Fourth, the lack of professional manpower related to urban regeneration and the instability of staff employment were derived as overall problems.

• Cartoon and Animation Studies
• /
• s.11
• /
• pp.11-28
• /
• 2007

The article concerns the public policy for the development of the arts educator in the field of the comic and animation education. The comic and animation education programs are focused on the promotion of the creativity and communication skills of the student in terms of the arts education. The article seeks to examine the case on the support program for the comic and animation educators, which has been managed by Korea Arts & Culture Education Service(KACES) since 2005. The forty two educators were surveyed. As a result, the support program of the KACES has an effect on the educator's recognition of the comic and animation education in the positive way. The most of the educators suggest that the support program should try to develop the comic and animation educator job as a special work with the full time job. In this repect, the article recommend the policy alternatives such as the promotion of the education program R & D, the knowledge and information system, training system and the establishment of the governance system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.153-153
• /
• 2006

ZnO 박막은 II-VI족 화합물 반도체로서 상온에서 3.37eV 의 넓은 밴드갭을 가지고 있을 뿐만 아니라 GaN(28meV) 보다 상온에서 큰 엑시톤 결합 에너지(60meV)와 열 안정성을 가지고 있다. 특히 ZnO를 base로 한 2차원의 화합물 (MgZnO, CdZnO 그리고 MgO) 반도체 물질은 UV LED, 생 화학 센서와 투명전극 등으로 응용이 가능하다. ZnO/MgZnO 양자우울 구조의 양자제한 효과로 인한 엑시톤 결합에너지와 전기적 광학적 특성 향상으로 광전자 소 자 제작이 가능하다. 그렇지만, Zn-Mg 상평형도에서 ZnO 내에 Mg 고용도가 상온에서 열역학적으로 4at% 이하 이고, 또한 ZnO와 MgO는 각각 우르짜이트 구조와 면심입방 구조를 가지기 때문에 Mg 함량용 높이는데 어려움이 있다. 이러한 문제점을 해결하기 위해 열처리를 함으로써 MgZnO 박막 내에 Mg 함량의 증가와 결정성 향상으로 고품질의 광전자 소자 제작을 가능하게 했다. 본 실험에서는 RF 마그네트론 스퍼터링 장비로 MgZnO 박막 성장 후 Si 기판위에 성장된 박막의 결정성 향상과 MgZnO 내의 Mg 함량 변화를 관찰하기 위해 성장된 박막에 대한 열처리 효과를 연구 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.65-65
• /
• 2006

ZnO 박막은 II-VI족 화합물 반도체로서 상온에서 3.37eV의 넓은 밴드갭을 가지고 있을 뿐만 아니라 GaN(28meV) 보다 상온에서 큰 엑시톤 결합 에너지(60meV)와 열 안정성을 가지고 있다. 특히 ZnO를 base로 한 2차원의 화합물 (MgZnO, CdZnO 그리고 MgO) 반도체 물질은 UV LED, 생 화학 센서와 투명전극 등으로 응용이 가능하다. ZnO/MgZnO 양자우물 구조의 양자제한 효과로 인한 엑시톤 결합에너지와 전기적 광학적 특성 향상으로 광전자 소 자 제작이 가능하다. 그렇지만, Zn-Mg 상평형도에서 ZnO 내에 Mg 고용도가 상온에서 열역학적으로 4at% 이하 이고, 또한 ZnO와 MgO는 각각 우르짜이트 구조와 면심입방 구조를 가지기 때문에 Mg 함량을 높이는데 어려움이 있다. 이러한 문제점을 해결하기 위해 열처리를 함으로써 MgZnO 박막 내에 Mg 함량의 증가와 결정성 향상으로 고품질의 광전자 소자 제작을 가능하게 했다. 본 실험에서는 RF 마그네트론 스퍼터링 장비로 MgZnO 박막 성장 후 Si 기판위에 성장된 박막의 결정성 향상과 MgZnO 내의 Mg 함량 변화를 관찰하기 위해 성장된 박막에 대한 열처리 효과를 연구 하였다.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.310-317
• /
• 2016

Lithium ion secondary battery (LISB) is an energy conversion system operated via charging-discharging cycle based on Lithium ion migration. LISB has a lot of advantages such as high energy density, low self-discharge rate, and a relatively high lifetime. Recently, increasing demands of electric vehicles have been encouraging the development of LISB with high capacity. Unfortunately, it causes some critical safety issues. It includes dendrite formation on negative electrode, resulting in electric shortage problems and battery explosion. Also, the elevated temperatures occurred during the LISB operation induces thermal shrinkage of polyolefin (e.g., polyethylene and polypropylene) separators. Consequently, the low thermal stability leads to decay of LISB performances and the reduction of lifetime. In this study, sulfonated poly (arylene ether sulfone) (SPAES) random copolymers were used as key materials to prepare polyolefin pore-filling separator. The resulting separators were evaluated in the term of metal ion chelation capability associated with dendrite formation, $Li^+$ ion conductivity and thermal durability.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.664-664
• /
• 2001

The mechanical alloying (MA) effect in $\sigma$-VFe intermetallic compound was studied by neutron and X-ray diffraction. The structure of MA $\sigma$-VFe powders were characterized by the X- ray diffraction with Cu- $K\alpha$ radiation and neutron diffraction with monochromatic neutrons of $1.835\AA$ using a high resolution powder diffractometer (HRPD). Mechanical alloying of $\sigma$-VFe compound gives rise to a dramatic structural change. After 60 hours of MA, the Fe-Fe distribution of the $\sigma$- phase VFe tetragonal structure with 30 atoms in a unit cell is found to change into that of the $\sigma$-(V,Fe) solid solution with bcc structure, which is a stable phase at elevated temperature above $1200^{\circ}C$. A comparison of X-ray diffraction data for the $\alpha$-phase has been also made with the corresponding neutron diffraction data. The (101) and (111) diffraction peaks of the $\sigma$-phase was clearly observed only in neutron diffraction pattern, which is believed to be a characteristic feature due to the chemical atomic ordering of $\sigma$- VFe phase.