• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.51-51
• /
• 2009

Ni 기 초내열합금은 원자력 발전설비의 열교환기용 재료를 비롯한 발전용 가스터빈, 제트엔진, 화학공장용 튜브 및 파이프재료 등 우수한 고온 기계적 특성 및 고온 내식성을 요구하는 각종 부품재에 광범위하게 이용되고 있다. Al 확산침투처리는 Ni기 초내열합금에 Al 혼합분말을 이용하여 금속간합화물을 코팅함으로써 고온산화특성 향상에 효과적인 방법이다. 본 연구에서는 Al 확산침투처리를 통하여 Inconel 617 표면에 Aluminide 코팅층을 형성함으로써 고온 내산화특성을 향상시키고자 하였다. Al 확산침투처리는 Al :$Al_2O_3$ : $NH_4Cl$ = 15g : 83g : 2g(wt.%)의 비율의 혼합분말을 사용하여 $900^{\circ}C$에서 1 시간 동안 Ar 분위기에서 수행되었다. Al 확산침투처리 후 $950^{\circ}C$에서 1000 시간 동안 air 분위기에서 열화시험을 수행하였다. Al 확산침투처리 후 고온열화를 통해 고온산화특성을 평가였으며, 고온 열화에 의해 형성된 코팅층의 석출물과 계면상의 상분석을 수행하였다.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.44-50
• /
• 1987

The silkworms were inoculated with flacherie virus and reserved at high temperature (37$^{\circ}C$) to find out the effect of high temperature on the multiplication of the virus in silkworms. The obtained results are summarized as follows. 1. It was shown that the inhibitory effect of high temperature treatment on the virus multiplication was achieved at high level at the newly molted stages in 5th instar larvae and both in 4th and in 5th larvae. 2. Twelve hours treatment and 24 hours treatment showed high inhibitory effect on the multiplication of flacherie virus. 3. The silkworms were inoculated with flacherie virus at the newly molted stage in 2nd instar larvae and followed by have temperature (37$^{\circ}C$) treatment at the newly molted stages in 5th instar and both in 4th and in 5th instar for 12 and 24 hours respectively. The increase in the survival rate with high temperature treatment ranged from 33.8 to 39.5 percent in index number and cocoon productive was 45.8 to 54.2 percent compared to non-treatment. 5. In the inoculation of the virus to the 4th instar larvae, the high temperature treatment at the newly molted stage in 5th instar brought increases in the survial rate from 49.7 to 68.9 percent in index number and in cocoon production from 44.3 to 69.0 percent.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.34-41
• /
• 1990

본 연구는 CCA로 방부(防腐)처리된 Lodgepole pine 각재(角材)의 재건조(再乾燥)시 고온건조법(高溫乾燥法)의 적용이 건조속도(乾燥速度) 및 건조결함(乾燥缺陷)의 발생에 어떻게 영향하는가를 고찰하고자 수행되었다. 고온건조시 건조속도는 통당(通常) 열기건조(熱氣乾燥)시보다 약(約) 2.5배 증가되었으며, 방부처리재의 재건조 속도는 처리전(前)의 전건조속도보다 약간 감소됨을 보였다. 표면할열(表面割裂)의 발생정도(程度)은 전건조시의 경우, 고온건조시 보다 심(甚)하였으나 재건조시에는 건조방법간에 큰 차이가 없었다. 방부제의 침투(浸透)를 도모(圖謀)하기 위하여 자상(自傷)처리(Incising)된 각재의 경우에는 재건조시 절개부(切開部)의 연장(延長)에 의해 할렬의 정도가 증가됨을 보였다. 뒤틀림(Warping)의 발생정도는 고온건조시가 통상 열기건조에 비해 심하지 않았으며, 전(全) 건조과정을 통하여 발생된 뒤틀림은 WWPA가 정(定)해놓은 Lodgepole pine 2등급(等級)(No. 2 grade)의 뒤틀림 허용치(許容値)의 범위내(範圍內)에 있음을 보였다. 결론적(結論的)으로, 고온건조시 증가되는 건조속도와 건조재의 질(質)에 큰 영향을 주지않는 범위내에서 발생되는 건조결함을 고려할 때, Lodgepole pine의 전건조및 CCA 처리후 재건조를 위해 큰 문제없이 고온건조법이 적용될 수 있음을 보였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.307-317
• /
• 2021

In recent years, global warming has led to frequent climate change-related problems, and elevated temperatures, among adverse climatic factors, represent a critical problem negatively affecting crop growth and yield. In this context, the present study examined the physiological traits of wheat plants grown under high temperatures. Specifically, the effects of elevated temperatures on seed development after heading were evaluated, and the vegetation indices of different organs were assessed using hyperspectral analysis. Among physiological traits, leaf greenness and OJIP parameters were higher in the high-temperature treatment than in the control treatment. Similarly, the leaf photosynthetic rate during seed development was higher in the high-temperature treatment than in the control treatment. Moreover, temperature by organ was higher in the high-temperature treatment than in the control treatment; consequently, the leaf transpiration rate and stomatal conductance were higher in the control treatment than in the high-temperature treatment. On all measuring dates, the weight of spikes and seeds corresponding to the sink organs was greater in the high-temperature treatment than in the control treatment. Additionally, the seed growth rate was higher in the high-temperature treatment than in the control treatment 14 days after heading, which may be attributed to the higher redistribution of photosynthates at the early stage of seed development in the former. In hyperspectral analysis, the vegetation indices related to leaf chlorophyll content and nitrogen state were higher in the high-temperature treatment than in the control treatment after heading. Our results suggest that elevated temperatures after the booting stage positively affect wheat growth and yield.

• Korean Journal of Poultry Science
• /
• v.17 no.2
• /
• pp.127-133
• /
• 1990

This study was undertaken to find out the effect of heating time and temperature, pH and NaCl concentration on the heat stability of egg albumen gel during heat treatment. With the transient decrease at 110-$130^{\circ}C$, hardness of heat-set albumen gel was increased as the heating temperature increased. The cohesiveness showed similar trend as well. The lightness was decreased while the yellowness was increased as the heating time and temperature increased. Heat-set albumen gel showed maximum hardness at pH 4.5-5.0 and pH 9.0 High heat treatment($120^{\circ}C$, 30min) showed higher hardness at alkaline range compared to low heat treatment($96^{\circ}C$, 30min.). Color of the albumen gel was relatively dark at acidic range and bright at alkaline range. High heat treatment caused darker albumen gel at alkaline range and brighter albumen gel at acidic range. The addition of NaCl increased hardness and cohesiveness of the albumen gel and improved the lightness after high heat treatment regardless of NaCl concentration.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.250-251
• /
• 2004

하나로(HANARO) 수조고온층 정화 계통은 수조고온층에 유입되는 원자로 수조수의 방사성 이온을 거르는 장치이다. 주기적인 수조고온층 계통의 이온교환수지 교체 및 폐기물 처리 작업은 원자로실에서 행하는 작업 중 방사선 피폭이 큰 작업 중의 하나이다. 지금까지 교환되어 일정기간 붕괴된 수조고온층 이온교환수지의 시료를 채취하고 HPGe MCA를 이용하여 수지에 흡착된 방사성 핵종의 종류 및 농도를 측정하고 이를 토대로 붕괴 추세선을 작성하였다.(중략)

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.102-107
• /
• 2002

This study deals with a physical properties of Larch(Larix kaemferi Carr.) treated at temperatures above 100℃. Treatment conditions of this experiment were operated at regular intervals of 20℃ at temperature up to 180℃ for 10, 30, 60 and 90 minutes by using the bomb, respectively. The results of this study were as follows : 1) The density was decreased with increasing the times and temperatures of steaming. 2) It was considered that the steaming treated specimen's higher shrinkage compared to control was due to change of composition and structure in cell wall. 3) The warpage of half edge grain specimen was decreased by high temperature steaming.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.1
• /
• pp.14-18
• /
• 2010

This study was conducted to investigate the effect of high-temperature during the reproductive growth period on the soybean growth and yield. Two soybean cultivars, Hwangkeumkong (HKK) and Pungsannamulkong (PSNK) were used in this study. By high-temperature treatment, plant height was increased in the two soybean cultivars, however, leaf area and dry weight were greatly reduced. Number of pod per plant was not changed by high-temperature treatment. However, number of seeds and 100 seed weight were reduced in two soybean cultivars. As compared with control, yield were decreased by 45% in both HKK and PSNK. It was also appeared that nitrogen contents in leaf, stem, and root of the HKK and PSNK were decreased by high-temperature treatment.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.1
• /
• pp.31-37
• /
• 1990

For fine-denier cocoon filament production, the precocious trimolting silkworms were induced by the treatments with both the imidazole compound "KK-42" hating anti-juvenile hormone activity and high temperature, and their growth, dietary efficiency, cocoon and cocoon filament qualities were compared with those of normal tetramolters as control. 1. The percentage of precocious trimolters was higher in the application of KK-42 than the treatment of high temperature. The effective concentration of KK-42 was 10$\mu\textrm{g}$/1arva. The high temperature treatment for 48 hour was more effective than 36 hour treatment, and silkworm larvae fed on mulberry leaves were more sensitive than artificial diet to induce trimolters. 2. The larval duration of the trimolters induced by KK-42 was 5.17 day shorter than that of normal tetramolters in mulberry leaves rearing, and the increasing pattern of body weight in the 4th inster larvae of trimotlers was similar to the 5th instar larvae of normal tetramolters. 3. The qualities such as cocoon weight, cocoon layer weight and cocoon layer ratio of precocious trimolter induced by KK-42 were much lower those of normal tetramolters: the cocoon weight and cocoon layer ratio were 0.78g, 14.2cg and 18.4% in mulberry leaves rearing, and 0.86 cg, 10.3cg and 12.3% in artificial diet rearing, respectively. 4. The size of cocoon and cocoon filament was smaller in the precocious trimolter, both KK-42 and high temperature, as compared with that of the normal tetramolters. 5. The efficiency of cocoon layer production of the precocious trimolters by the KK-42 was lower than that of the normal tetramolters: amount of the cocoon layer production per 1g of dry mulberry leaves ingested was 7.97cg in the precocious trimotors, while 9.20cg in the normal tetramolters.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.137-143
• /
• 2005

Oriental melons hold at $38^{\circ}C$ for 48 hours before storage increased their soluble solid, titratable acidity, vitamin C contents and ${\alpha}$-tocopherol activity. These heat treated oriental melons maintained lower production of carbon dioxide, ethylene and acetaldehyde and loss of fresh weight than untreated them, called control, during $3^{\circ}C$ MA storage. After 39 days in storage, the last day of storage, visual quality and internal quality, such as firmness, soluble solid, titratable acidity, vitamin C and ${\alpha}$-tocopherol activity, showed higher in heat treated oriental melons. Especially, Ion leakage of flesh, index of chilling injury, increased remarkably in control, so that heat treatment had to alleviate chilling injury in oriental melon. Moreover, while Alternaria rot was shown in control plot after 25 days in $3^{\circ}C$ MA storage, oriental melons treated heat were not appeared any decomposition after 39 days in $3^{\circ}C$ MA storage. As storage life of oriental melon was calculated by regression equation between visual quality and days in storage, that was longer 8 days in heat treated than control. Consequently, heat treatment that was mild, $38^{\circ}C$ and long period, 48 hours, executed before storage, sterilized surface alleviated chilling injury and lengthened storage life in oriental melons.