• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.317-323
• /
• 2016

This paper suggests a system that can detect malfunctions of the temperature testing equipment, and then notify this information to surroundings using arduino. Precision electronics need a test under extremely high/low temperature using temperature called a chamber. If this chamber have a malfunction situation, the precision electronics under test is damaged and scrapped. Especially when the temperature test is automatically conducted at night with no representative, this system monitors the actual temperature of the tested product in real-time by attaching a temperature sensor to the inside of the test equipment. In case when it is out of the temperature range set up by the tester, the damage to high-priced products can be prevented in the condition of extremely high/low temperature, by turning off the power of the temperature testing equipment, and also notifying this information to the worker at night-time. Regardless of the equipment manufacturers, proposed system in this paper can be applied to all kind of temperature testing equipments, and it can be also produced for low cost.

• Journal of Mushroom
• /
• v.9 no.4
• /
• pp.155-160
• /
• 2011

Changes of fruiting body yield and morphology according to growing temperatures in Pleurotus strains were investigated. In this study, twelve commercial strains divided into low, medium and high temperature groups were tested. On the basis of fruiting body yield, they showed best in their own temperature properties. On the other hand, they didn't have any fixed tendency to growing temperatures on morphological characteristics. Thicknesses of pilei were best at $10^{\circ}C$, having nothing to do with strains. Lengths of stipes were increased with the progress of cultivation temperatures in five strains including 'Sambok'. The other strains showed differences on this trait. Thicknesses of stipes were decreased with the progress of cultivation temperatures in other strains excepting 'Sambok and ASI2029'. Days for harvest were extended as temperature decreased, even though the shortest days were different according to strains. Sometimes there were abnormal shapes of fruiting bodies in response to temperatures in some strains. In 'Suhan-1', white cilia fully covered onto the surface of pilei were observed macroscopically at the early stage and then disappeared or remained a little later at $10^{\circ}C$ cultivation. In 'Chunchu-2', their stipes were twisted and bent over $20^{\circ}C$ cultivation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.143-143
• /
• 2010

GTL(Gas-to-Liquids)공정 중 합성가스 제조공정(Reforming Process)인 ATR(Auto-Thermal Reforming), SCR(Steam Carbon Reforming), POx(Partial Oxidation)의 시뮬레이션 연구를 수행하였다. Reforming 공정에서 생산된 합성가스는 GTL 합성유 제조공정인 FT(Fischer-Thropsch) 반응기로 주입되며, 합성유 생산에 최적의 효율을 보이는 H2/CO 비(합성가스에 포함된 반응물비)는 2.0으로 알려져 있다. FT공정은 합성가스를 원료로 고온 및 고압 반응을 거쳐 GTL 공정의 최종 생산품인 FT합성유를 제조하는 공정이다. 본 연구에서는 FT공정 효율 극대화를 위해 reforming 공정에서 생성되는 합성가스 내 H2/CO의 비를 2로 수렴토록 모사조건을 설정하였으며, 상기 조건을 만족하는 reforming 공정들의 운전 온도 및 feed 조성을 분석하고 비교하고자 한다. 현재 GTL 플랜트관련 산업계에 적용 혹은 주 연구대상인 reforming 공정으로는 ATR, SCR, POx 공정이 있다. ATR 공정은 $850{\sim}1100^{\circ}C$에서 메탄, 스팀 및 산소를 원료로 활용하여 H2 및 CO를 생산하는 공정으로 발열/흡열 반응이 상존하여 에너지 비용이 낮지만 공정구조 상 열회수설비 및 ASU(Air Separation Unit)이 필요하기에 CAPEX(초기설비 설치비용)가 높은 편이다. SCR공정은 CH4, Steam 및 CO2를 연료로 하기에 이산화탄소가 일정부분 포함된 가스전에도 적용이 가능하나 공정 운전 중 지속적으로 외부에서 열을 공급해야 하기에 에너지 투입비용이 높은편이며, 탄소침적의 문제가 있어 대용량 플랜트에는 적합하지 않다. POx공정은 약 $1,500^{\circ}C$의 고온에서 CH4가 O2에 의해 부분 산화되는 방식으로 촉매가 필요없어 설비비가 타 공정에 비해 저렴하나 생산가스의 H2/CO비가 다소 낮아 전체적인 GTL 공정효율이 저하되는 단점이 있다. 상기 세 공정은 GTL 산업계에서 실증 및 효율증대를 위해 주로 연구되는 공정이기에 본 연구의 분석대상으로 설정하였다. 본 연구에서는 상용공정모사기인 Aspen Plus를 활용하여 reforming 공정별로 FT합성공정의 최적 조건(H2/CO=2)을 만족하는 합성가스 생산조건 분석 및 비교를 수행할 예정이다. 운전조건인 공정 운전온도 및 feed 가스조성 등을 모사하기 위해 합성가스 reforming 공정을 모델링하고 공급유량 및 압력 등의 운전변수는 GTL국책과제 1단계 연구수행 결과를 토대로 선정하고자 한다. GTL공정의 경우, 설비의 운전조건이나 연료가스의 구성 및 유량에 따라 적합한 reforming 공정이 다르기에 본 시뮬레이션 결과를 향후 GTL 플랜트 공정모델 설계시 reforming 공정선정에 참고자료로 활용하고자 한다.

• Clean Technology
• /
• v.25 no.4
• /
• pp.331-335
• /
• 2019

Interest in environmental pollution is increasing all over the world, and technology development to solve it is actively carried out. In areas where heat is used, especially, combustion is causing countless pollutants in the air environment. Combustion catalyst is a technology that reduces NOx and CO by lowering combustion temperature and enabling complete combustion. Traditional combustion catalysts are expensive and complex in the synthesis process using precious metal catalyst. In this study, hexaaluminate, a high-temperature combustion catalyst, was manufactured using urea, and the properties were investigated according to the synthesis time. The combustion performance and characteristics were evaluated using this catalyst. As the temperature increased, the changing methane conversion rate was shown in two patterns. The conversion rates for 1 hour, 9 hours, and 12 hours were similar, while the conversion rates for 3 hours and 6 hours showed similar patterns. Methane combustion performance increased rapidly as the synthesis time increased from 6 hours to 9 hours, whereas the temperature at T50 was approximately 745 ℃. The performance of the synthesized combustion catalyst for 9 hours was optimum as the NOx emission of this combustion catalyst was not present and the maximum emission of CO was 72 ppm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.1
• /
• pp.1-5
• /
• 2007

The structural and morphological properties of planar, nonpolar (11-20) a-plane GaN layers grown by hydride vapor phase epitaxy on (1-102) r-plan sapphire substrates are characterized. We report on the effect of low temperature ($500/550/600/660^{\circ}C$) AIN buffer layers on the structural properties of HVPE grown a-GaN kayers. and for the comparison, low temperature GaN and InGaN buffer layers are also tried for the growth of a-plane GaN layers. The structural geometry of a-GaN layers is severely affected on the growth condition of low temperature buffer layers. The most planar a-GaN could be obtained with $GaCl_3$ pretreatment at the growth temperature of $820^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.27-33
• /
• 1979

Eight winter wheat varieties were tested to study the varietal differences on yield and the other characteristics at four different treatments with two different photoperiod and two different temperature levels. In heading date, Changkwang and Parker exhibited the moot sensitive responses to short day length, but Yecora 70. Suweon 169 and Bezostaya were insensitive in general. Culm length was greatly increased at short day length in Bezootaya while Yukseong 3 expressed same responses under low temperature condition. However, little variation of culm length was observed in Yecora 70 regardless the day length. Blueboy, Changkwang and Yecora 70 exhibited the minimal variations in culm length due to the temperature treatment. High yieldings were produced in Blueboy, Suweon 169 and Parker under short day condition, but Parker, Yecora 70. Yukseong 3 and Study produced high yields due to the influences of low temperature. Yield increase was primarily due to the increased number of spikes per plant and number of spikes per plant and 1, 000 grain weight under the low temperature conditions.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.677-685
• /
• 2014

A direct carbon fuel cell (DCFC) generates electricity directly by converting the chemical energy in coal. In particular, a DCFC system with a solid oxide electrolyte and molten carbonate anode media has been proposed by SRI. In this system, however, there are conflicting effects of temperature, which enhances the ion conductivity of the solid electrolyte and reactivity at the electrodes while causing a stability problem for the anode media. In this study, the effect of temperature on the stability of a carbon-carbonate mixture was investigated experimentally. TGA analysis was conducted under either nitrogen or carbon dioxide ambient for $Li_2CO_3$, $K_2CO_3$, and their mixtures with carbon black. The composition of the exit gas was also monitored during temperature elevation. A simplified reaction model was suggested by considering the decomposition of carbonates and the catalyzed Boudouard reactions. The suggested model could well explain both the measured weight loss of the mixture and the gas formation from it.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.115-119
• /
• 1997

The chemical and microbial properties and acceptability of milk and soymilk inoculated with Bifidobacterium were studied at each storage time (0, 5, 10, 15, 20, 25, and 30 days). Soymilk, milk, low-heat milk, low-fat milk, non-fat dry milk with Bifidobacterium longum ATCC 15707 were incubated in a nitrogen-carbon dioxide atmosphere at $4^{\circ}C$ for 30 days. pH and acidity of all the samples were in the range of $pH\;6.6{\sim}pH\;6.9$ and $0.4%{\sim}0.55%$ for 30 days, respectively. The viable cell numbers in non-fat dry milk reached above $8.4{\times}10^9\;CFU/mL$ after 15 days. The glucose content in soymilk was $4.5{\times}10^{-2}{\sim}5.5{\times}10^{-2}\;mM$ at 10 days of storage. Milk and soymilk containing B. longum at $4^{\circ}C$ were found to be different in taste, odor, off-flavor at each storage time (0, 2, 4, 6, 8, and 10 days). Sensory scores indicated that milk containing bifidobacteria was poorly affected by the storage time, but milk at 4 days of storage was quite close in odor and off-flavor to milk with storage time 0. Soymilk containing bifidobacteria at 2 and 4 days of storage had significantly higher acceptability of taste than soymilk with storage time 0.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.483-487
• /
• 2001

As a part of basic investigation for utilizing of cuttle bone as a calcium source, we examined on the extraction methods (calcining at $800^{\circ}C$ for 2 hrs, autoclaving at $121^{\circ}C$ for 10 hrs and ultrasonic treatments at $60^{\circ}C$ for 10 hrs) as a pretreatment methods for preparation of calcium-based powder from cuttle bone, The color of calcined calcium-based powder from cuttle bone was white, while that treated by other methods was light yellow. The calcium content in calcined calcium-based powder was $70.5\%$, and revealed high about 2 times compared to those pretreated by other methods. And, calcium solubility in calcined calcium-based powder was improved 22 times compared to raw cuttle bone powder, Among calcining, autoclaving and ultrasonic treatments as a pretreaoent methods for preparation of calcium-based powder from cuttle bone, calcining treatment was superior to other methods on the aspect of color, calcium solubility and purity of calcium-based powder, Judging from X-ray diffraction pattern of calcined calcium-based powder, most of calcium was present as a form of calcium oxide, But, pH of calcined calcium-based powder revealed strong alkali of pH 12.9. This pH value might invoke health risk in using food resource. Therefore, for utilization effectively calcined calcium-based powder from cuttle bone, it requires a suitable treatment such as adjustment of pH to neutral condition.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.328-336
• /
• 2005

In order to remove the NO contained in exhaust gas by the non-selective catalyst reduction method, the catalysts were prepared by varing the loading amount of Ag and V into ${\gamma}-Al_2O_3$. The conversion of $NO_x$ using the prepared catalysts was studied by varying the temperatures, $O_2$ concentrations and $SO_2$ concentrations using. The influence of the catalyst structure on $NO_x$ conversion was studied through the analysis of the physical properties of the prepared catalysts. In the case of $AgV/{\gamma}-Al_2O_3$ catalyst, the $NO_x$ conversion was lower than that of $Ag/{\gamma}-Al_2O_3$ at higher temperatures but higher than that of $Ag/{\gamma}-Al_2O_3$ at lower temperatures. Even though $SO_2$ was contained in the reaction gas, the $NO_x$ conversion did not decrease. Based on the analysis including XRD, XPS, TPR, and UV-Vis DRS before and after the experiments, the experimental results were examined. The results indicated that, $NO_x$ conversion decreased at higher temperatures since Ag oxide could not be maintained well due to the addition of V, whereas it increased at temperatures lower than $300^{\circ}C$ due to the catalytic action of V.