• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.337-343
• /
• 2006

The purpose of this study was to estimate the relation between techniques used for microleakage from dye penetration and for marginal adaptation from SEM evaluation of the restoration. Using high speed #330 bur class V cavities ($4{\times}3{\times}1.5 mm$ around CEJ) were prepared on the buccal surface of 20 extracted human molars. Six dimples as reference points for SEM and dye penetration evaluation were made with 1/2 round bur. Cavity was bulk filled with microhybrid composite resin (Esthet X) and all-in-one adhesive (Xeno III). Teeth were stored in saline solution for one day, after then, they were finished and polished using Sof-Lex system. Fifty percent silver nitrate dye solution was used for the evaluation of microleakage and resin replica was used for marginal adaptation. All of these were done after 1000 times thermocycling between 5 and $55^{\circ}C$. Vertical sections were made through three dimples of restoration to obtain samples for the evaluation of dye penetration and inner marginal adaptation. Outer adaptational estimation was done with an intact restoration before sectioning. Dye penetration was determined in three degrees and percentage of outer and inner leaky margin was estimated from SEM image The data were analysed statistically: Spearman's rho test were used to check relationships between two methods. The result were as follows : 1. There were significant relationships between degree of dye penetration and inner and outer marginal adaptations each (p < 0.01). 2. However, there was no significant relationship between the results or inner and outer marginal adaptation. Within the results of this study, relationship between the percentage of marginal adaptation and microleakage shows significant relationship. However, inner and outer marginal adaptation did not show any significant relationship mutually.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2006.02a
• /
• pp.109-114
• /
• 2006

최근 Human 지놈 프로젝트를 포함한 다양한 종의 지놈 프로젝트가 수행되고 수많은 지놈정보가 생산되고 있으며 이를 해석하고 서로 연관성를 찾기 위한 다양한 연구가 진행되고 있다. 즉 최신 생명공학과 관련된 연구방향이 DNA의 구조적 해석에서 기능 해석과 유전자들의 상호연관성을 규명하는 방향으로 변화하고 있으며 이를 위한 강력한 도구로서 DNA microarray (DNA chip)는 방대한 양의 지놈 정보를 이용하여 단시간에 대량으로 고속처리하여 효율적으로 유전자 기능을 분석할 수 있는 주목받고 있는 방법이다. DNA microarray 실험과 분석에 있어 데이터분석, 재현성, 종간의 비교, 확인실험 및 비용 등의 문제가 있지만 유전자발현양상 데이터로부터 정확한 환자의 예후를 예측할 수 있는 비교적 적은 유전자 그룹의 진단마커를 찾거나, 하나의 유전자가 아니라 mouse 전체 지놈의 유전자발현 패턴을 인간의 암을 위시한 각종 질병 연구를 위한 발현 신호나 변화 등을 발견하여 신약개발 등에 활용하고자 하는 시도가 활발히 진행되고 있다. 서로 다른 종간에 비슷한 phenotype의 유전자발현도 진화적으로 보존되었다는 전제 하에서 지놈 sequence의 비교연구가 가능하고 DNA microarray 발현 데이터에 근거하여 독립적으로 각 종간의 유전자발현패턴을 비교함으로써 난치병 등을 새롭게 분류할 수 있다. 즉, 암세포 등에서 유전자발현 양상은 유전학적, 환경적 alteration들이 잘 반영되어 있다고 간주하고, 이러한 양상을 바탕으로 인간의 암을 위시한 다양한 질병 연구를 위한 최적의 mouse 모델을 찾을 수 있고, 이는 결국 새로운 치료 방법 개발이나 맞춤의학 실현에 중요한 역할을 할 것으로 기대된다. 특히 pathway 타겟으로 하는 치료를 위해서는 Human-mouse 비교를 통한 발현 신호를 찾는 것이 진단에서는 매우 유용한 방법이다. 이를 위한 고성능의 분석방법이나 시스템의 개발이 중요하게 된다.. 관류의 정도와 조영증강정도를 중심으로 관류 MR 영상소견과 조직학적 소견을 관련지어 분석하였다. 결과: 조영증강 T1강조MR영상에서 환상조영증강을 보이는 다형성 교보세포종 2예에서는 변연부 외륜이 고관류를, 중심부의 괴사부위는 저관류로 나타났다. 저등급 교종은 경계가 불분명한 저관류부위로 보였다. 뇌농양 2예는 변연부 외륜이 경도의 고관류를, 중심부는 저관류로 나타났다. 뇌수막종은 미만성의 균일한 중등도 혹은 고도의 고관류로 보였으며, 임파종과 배아종은 경계가 명확한 저관류부위로 나타났다. 신경세포종은 종괴\ulcorner 일부에 중등도 혹은 고도의 고관류부위가 관찰되었고, 전이암은 다수병변중 일부에서 중등도의 고관류를 보였다. 방사선괴사는 저관류부위내에 국소적 고관류부위를 보였다. 결론: 관류 MR영상은 뇌종양의 관류상태를 비교적 잘 반영하며, 조직학적 특성을 예측하는데에 도움을 주 수 있을 것으로 기대된다. 뇌종야에서의 관류MR영상의 분명한 역할을 규명하기 위해서는 앞으로 더 많은 임상적 연구가 필요할 것으로 생각된다.조증 환자의 자극성 전타액내 lactobacilli양은 peroxidase system을 함유한 세치제를 사용한 군에서 대조군에 비해 상대적으로 낮게 나타났으나(p = 0.067) 통계학적 유의성은 없었다.같은 예에서 찾아 볼 수 있다. 첫째, 발음상으로 동사의 변화형에서 "porte[$p{\jmath}rte$](들다: 현재형), porte[$p{\jmath}rte$](과거분사형), porta[$p{\jmath}rte$](단순과거형)"등이 대립되며, 이휘 "Porto[$p{\jmath}rte$](포르토)"와도 대립된다. 둘째, 어휘적 대립 "le haut[$l{\partial}o$](위)/l'eau[lo](물)"와 형태론적 대립 "le[$l{\partial}$](정관사, 남성단수)/l

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.1-11
• /
• 2005

Several Solid Freeform Fabrication Systems(SFFS) are commercialized in a few companies for rapid prototyping. However, they have many technical problems including the limitation of applicable materials. A new method of agile prototyping is required for the recent manufacturing environments of multi-item and small quantity production. The objectives of this paper include the development of a novel method of SFFS, the CAFL/sup VM/(Computer Aided Fabrication of Lamination for Various Material), and the manufacture of the various material samples for the certification of the proposed system and the creation of new application areas. For these objectives, the technologies for a highly accurate robot path control, the optimization of support structure, CAD modeling, adaptive slicing was implemented. However, there is an important problem with the conventional 2D lamination method. That is the inaccuracy of 3D model surface, which is caused by the stair-type surface generated in virtue of vertical 2D cutting. In this paper, We design the new control algorithm that guarantees the constant speed, precise positioning and tangential cutting on the 5DOF SFFS. We develop the tangential cutting algorithm to be controlled with constant speed and successfully implemented in the 5DOF CAFL/sup VM/ system developed in this paper. Finally, this paper confirms its high-performance through the experimental results from the application into CAFL/sup VM/ system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.209-220
• /
• 2013

Handover is the technology to minimize data lose of mobile devices and make continuous communication possible even if the device could be moved from one digital cell site to another one. That is, it is a function that enables the mobile user to avoid the disconnection of phone conversations when moving from a specific mobile communication area to another. Today, there are a lot of ongoing researches for fast and efficient hand-over, in order to address phone call's delay and disconnection which are believed to be the mobile network's biggest problems, and these should essentially be resolved in all mobile networks. Thanks to recent technology development in mobile network, the LTE network has been commercialized today and it has finally opened a new era that makes it possible for mobile phones to process data at high speed. In LTE network environment, however, a new authentication key must be generated for the hand-over. In this case, there can be a problem that the authentication process conducted by the hand-over incurs its authentication cost and delay time. This essay suggests an efficient key caching hand-over method which simplifies the authentication process: when UE makes hand-over from oMME to nMME, the oMME keeps the authentication key for a period of time, and if it returns to the previous MME within the key's lifetime, the saved key can be re-used.

• The Magazine of the IEIE
• /
• v.11 no.5
• /
• pp.42-50
• /
• 1984

국내의 다음세대 컴퓨터 개발을 위한 VLSI 설계와 CAD 분야에 대한 연구 방향을 제시한다. 연구의 목표는 국제적으로 경쟁할 수 있는 VLSI 설계능력과 백만개 정도의 트랜지스터로 자성된 회로를 경제적으로 설계하기 위한 CAD 기술과 System의 확립이다. ·새로운 회로 구조와 알고리즘에 대한 연구 · CAD 도구와 언어의 개발에 관한 첨단 CAD 기술개발연구 · VLSI 설계에 필요한 CAD 도구 이용과 개발에 필요한 표준 인터페이스, 네트워킹, 컴퓨팅 하드웨어. 시스템 소프트웨어에 대한 연구등의 부분으로 크게 나눌 수 있다. 이용 가능한 CAD system을 평가하고 개선하며 첨단 CAD에 대한 소프트웨어와 하드웨어에 대해 · 컴퓨팅 하드웨어 · 프로그램 분위기 · 네트워킹 능력 ·자료 교환을 위한 표준인터페이스 등에 관해 조사분석도 병행한다. CAD에 관한 세부적인 연구 과제는 · 시스템 사양언어 · 설계 검증 ·시스템시뮬레이션· 설계 합성 · 설계 해석· 설계 방법론·디바이스와 공정 모델링 프로그램 등이다. 고속 계산용 VLSI에 관한 구조와 알고리즘은 행렬 계산을 위한 ·분산 배열 처리 회로 ·시스토릭 (Systolic) 배열 회로 ·셀률라(Cellular) 논리 회로 · 3차원 배열 회로 와 · 비규칙적 계산 알고리즘을 갖는 VLSI가 있다. VLSI설계훈련과 CAD 기술 축적을 위해 CAD enter를 설립하여 전국적인 CAD 네트워킹을 관계 연구소와 여러 대학에 가설하며, MPC 계획을 추진한다. VLSI설계 가능성이 입증되면 VLSI 설계능력을 더욱 향상 시키기 위해 0.5∼1.0mm기술의 silicon faundary를 설립한다. 연구 개발 조직은 대학, 산업체. 연구소가 삼위일체가 되어 수행될 수 있도록 연구 개발 위원회를 설치 운영하며 경쟁적이며 경제적으로 연구 업무를 집행하는 것이 바람직하다.았다.형질에 관여하는 귀전자에 미치는 기구에 대하여 검토할 여타가 있다고 보여진다. 분해능의 특징으로 미루어 앞으로는 레이저를 이용한 계측 방법이 그 주류를 이룰 것으로 사료된다. 우선 본 해설은 기체의 온도 및 농도의 광학적 측정방법중 Raman산란광 검출법에 대하여 실제로 측정하는 입장에서 간단히 소개한다.lity)이, 높은 $GA_3$함량에 기인된다'는 주장은 본실험(本實驗)으로 부인(否認)되었다. 따라서, 응용학적(應用學的) 측면에서 고려해 볼 때, 리베스식물(植物)의 육종기간 단축을 위한 모든 화아분화(花芽分化) 촉진 조치는 P.J.-식물(植物)이 20. node이상 생육하였을 때 취하는 것이 효율적인 것으로 결론 지어진다.앞당겨진 7月 셋째 週였다. 8. Culex (Culex) tritaeniorhynchus summoro년의 最大發生 peak는 1981年, 1982年 모두 8月 둘째 週였다. 9. Anopheles (Anopheles) sinensis의 最大發生 peak는 1981年에 7月 다섯째 週, 1982年은 2週 앞당겨진 7月 셋째 週였다. 10. 重要 3種의 最大 peak를 比城하면 Culex (Culex) pipiens pallens와 Anopheles (Anopheles) sinensis는 1981年과 1982年 모두 最大 peak時期가 同一하였으며, Culex (Culex) tritaeniorhynchus summoro년는 2年間 모두 8月둘째 週에 나타났다.osterior to manubrium and anterior to aortic arch) replacing the normal mediastinal fat. (2) In benign thymoma, the marging of the mass was smooth and the normal fat

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.113-121
• /
• 2012

In this paper, we proposed fast and efficient algorithm for detecting near-duplication based on content based retrieval in large scale video database. For handling large amounts of video easily, we split the video into small segment using scene change detection. In case of video services and copyright related business models, it is need to technology that detect near-duplicates, that longer matched video than to search video containing short part or a frame of original. To detect near-duplicate video, we proposed motion distribution and frame descriptor in a video segment. The motion distribution descriptor is constructed by obtaining motion vector from macro blocks during the video decoding process. When matching between descriptors, we use the motion distribution descriptor as filtering to improving matching speed. However, motion distribution has low discriminability. To improve discrimination, we decide to identification using frame descriptor extracted from selected representative frames within a scene segmentation. The proposed algorithm shows high success rate and low false alarm rate. In addition, the matching speed of this descriptor is very fast, we confirm this algorithm can be useful to practical application.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.20-29
• /
• 2014

Recently, LTE is preparing to make a new leap forward LTE-A all over the world. As LTE privides high speed service, the role of mobile phones seems to change from voice to data service. According to Cisco, global mobile data traffic will increase nearly 11-fold between 2013 and 2018. Mobile video traffic will reach 75% by 2018 from 66% in 2013 in Korea. However, voice service is still the most important role of mobile phones. Thus, controllability of throughput and low BLER is indispensable for high-quality VoIP service among various type of traffic. Although the maximum AMR-WB, 23.85 Kbps is sufficient to a VoIP call, it is difficult for the LTE which can provide tens to hundreds of MB/s may not keep the certain level VoIP QoS especially in the cell-edge area. This paper proposes a new scheduling algorithm in order to improve VoIP performance after analyzing various scheduling algorithms. The proposal is the technology which applies more priority processing for VoIP than other applications in cell-edge area based on two-tier scheduling algorithm. The simulation result shows the improvement of VoIP performance in the view point of throughput and BLER.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.3
• /
• pp.402-408
• /
• 2007

This study was conducted in order to evaluate the antioxidant activity of extruded ginseng in different extracted fractions. Each of the fractions obtained from extruded ginseng and ginseng (control) were extracted with 80% ethanol, and then the lipophilic components were removed with ether while the hydrophilic components were separated with water-saturated butanol. Each of the 80% ethanol/butanol/water layers were collected and evaporated to acquire samples for tests of saponin content and antioxidant activity. The antioxidant activity of extruded ginseng fractions and ginseng fractions were determined via the oxygen radical absorbance capacity (ORAC) assay. Overall, the extruded ginseng samples harbored saponin contents of 2.2 (Rg1), 2.3 (Re), 1.2 (Rc), 1.3 (Rb2), and 2.2 (Rd) times that measured in the ginseng prior to extrusion. Antioxidant capacity was also higher, not only in the 80% ethanol/butanol which harbor a significant quantity of saponin, but also in the water fractions, which harbor relatively low quantities of saponin as compared to the control samples. All three of the fractions extracted from extruded ginseng evidence significantly higher antioxidant capacity than the controls (0.05

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.77-85
• /
• 2008

This work proposes a 12b 130MS/s 108mW $1.8mm^2$ 0.18um CMOS ADC for high-quality video systems such as TFT-LCD displays and digital TVs requiring simultaneously high resolution, low power, and small size at high speed. The proposed ADC optimizes power consumption and chip area at the target resolution and sampling rate based on a three-step pipeline architecture. The input SHA with gate-bootstrapped sampling switches and a properly controlled trans-conductance ratio of two amplifier stages achieves a high gain and phase margin for 12b input accuracy at the Nyquist frequency. A signal-insensitive 3D-fully symmetric layout reduces a capacitor and device mismatch of two MDACs. The proposed supply- and temperature- insensitive current and voltage references are implemented on chip with a small number of transistors. The prototype ADC in a 0.18um 1P6M CMOS technology demonstrates a measured DNL and INL within 0.69LSB and 2.12LSB, respectively. The ADC shows a maximum SNDR of 53dB and 51dB and a maximum SFDR of 68dB and 66dB at 120MS/s and 130MS/s, respectively. The ADC with an active die area of $1.8mm^2$ consumes 108mW at 130MS/s and 1.8V.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.3
• /
• pp.1-7
• /
• 2011

Recently, various researches have been proposed to accelerate GPU-based volume ray-casting. However, those researches may cause several problems such as bottleneck of data transmission between CPU and GPU, requirement of additional video memory for hierarchical structure and increase of processing time whenever opacity transfer function changes. In this paper, we propose an efficient GPU-based empty space skipping technique to solve these problems. We store maximum density in a brick of volume dataset on a vertex element. Then we delete vertices regarded as transparent one by opacity transfer function in geometry shader. Remaining vertices are used to generate bounding boxes of non-transparent area that helps the ray to traverse efficiently. Although these vertices are independent on viewing condition they need to be reproduced when opacity transfer function changes. Our technique provides fast generation of opaque vertices for interactive processing since the generation stage of the opaque vertices is running in GPU pipeline. The rendering results of our algorithm are identical to the that of general GPU ray-casting, but the performance can be up to more than 10 times faster.