• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.107-116
• /
• 2002

Crash Cushion is a kind of safety facilities on roadside which acts the role of absorbing impact energy when vehicles are driven out of normal route such as Gore area of freeway off ramp. Criteria for severity index considering accident occurrence possibility are needed to have strong effect on installing the facilities. However, present criteria for establishing crash cushion design do not include such processes. Therefore, the paper presents two kinds of study to develop criteria for severity index. First of all, development of accident forecasting model on freeway off ramp is presented. The module is a relationship between accidents and road environment by negative binomial distribution (NB) which is called to reflect very well quality of accidents at Gore of crash cushion installed freeway Secondly, freeway exiting behavior model is developed because the human factor is the most important one. However, many literatures have shown between road environment and accidents which are more quantitative than human factor. The study supposed advanced process steps on actual freeway and analysed correlation between variables and accidents. The criteria for severity index is presented to determine whether to install or not by benefit cost analysis for each module. The standard for severity index will help to determine whether to install the crash cushion or not and to estimate severity for freeway and off ramp.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.30-40
• /
• 2010

The freeway congestion is largely generated by a mainline spillover of the exit ramp queue. So it is necessary to study for modeling of the phenomenon and applying the model. In this study, the authors evaluated applicability of the Supply-Demand model, which can express traffic flow for the freeway by applying flexibly supply and demand curves for capacity of the freeway. First the authors proposed methods processing input data required in the Supply-Demand model, such as sending & receiving functions and time-varying capacity constraints for the freeway mainline. After modeling the Supply-Demand application model, the authors applied the model to the site including congested Hongeun exit ramp in Seoul Ring-road, and improved the model by adjusting application techniques and calibrating parameters. The result of the analysis showed that the Supply-Demand model yielded a queuing pattern and queue location similar to them observed in the field data, and applicability of the Supply-Demand model was varified.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.7-19
• /
• 2007

The purpose of posted speeds is to provide a speed that ensures the safety of vehicle flow according to given road situations. Because of this, posted speeds must be carefully examined, and posted speeds at freeway exits and entrances in particular should consider car characteristics. Posted speeds at freeway exits and entrances must take changing speeds due to curve radiuses into consideration and in this study, an 85th percentile speed becomes the most important element to consider. When it is considered that most traffic accidents occur because of variations in speed between cars, posted speeds should be set after considering car traveling characteristics. Within these dimensions, instead of putting significance on an upper direction regulation or lower direction regulation, speed distributions which fit to the characteristics of each road should be fully considered. Accordingly, this study evaluated appropriate posted speeds that will reduce the dangers of traffic accidents through posted speed regulations of roads now in operation by offering a posted speed setting method theory, using entries at Yangji, Yongin, and Cheongwon interchanges as subjects.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.113-118
• /
• 2001

교통혼잡의 묘사를 보다 구체적으로 하기 위한 Mesoscopic시뮬레이션 모형으로서 INTEGRATION을 소개한다. 모형의 기본구조가 설명되고, 특히 응용사례로서 경부고속도로 축을 중심으로 한 주거지역의 급속한 팽창으로 야기된 고속도로상의 교통대안을 평가하려는데 초점을 맞추고 있다. 교통대안은 혼잡을 완화시키는데 타당하고 기술적으로도 실현가능한 대안이 제시된다. 이러한 대안들은 거시 및 미시 모의실험모형을 통해 면밀히 분석 평가되며 또한 대안을 도출하고 평가하는 과정의 제시로서 교통량조사에 근거한 OD 도출, Subarea 네트워크 분석 및 통합된 네트워크 모의실험과 같은 새로운 기법들이 아울러 제시된다. 대안의 대부분은 네트워크 개선에 관련한 것이다. 반포 IC 진출입로 공사(Al), 위빙 제거를 기초로 한 서초 IC TSM(A2), 서초-양재 구간의 고속 저속 분리(A3), 헌릉 IC(A4)의 신설, 판교 JC 개선(A5), 백현 IC(A6)신설. 가장 자본 집약적인 대안은 A4, A6순이다. A1, A5, A6은 구간은 짧으나, 자본 집약적이며 어느 정도의 공사 기간이 소요된다. 가장 비용이 적게 소요되는 대안은 A2, A3이다. A2는 시행이 용이하나, A3의 경우 공사기간 중 교통분산 대책이 필요하다. A1, A6은 속도증가와 통행시간 절감의 측면에서 가장 비용대비 효율적인 것으로 분석되었다. 시뮬레이션의 한계 및 개선방안이 함께 검토되었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.57-66
• /
• 2007

Weaving is defined as the crossing of two or more traffic streams traveling in the same general direction along a significant length of highway without the aid of traffic control devices. Compared with other freeway sections, perturbation is easy to happen at weaving section. Because there are a lot of lane-changing maneuvers at the weaving section, traffic is subject to turbulence in excess of that normally presents on freeway basic section. This turbulence causes operational problems and its impact must be considered. The purpose of this paper is to perform a basic study on flow characteristics by lane, which can be achieved through analyzing breakdown phenomenon in the microscopic approach. The study made use of data derived from the aerial photography for the microscopic analysis. This research produced the 30-second interval data such as flows, speeds, and densities for the macroscopic analysis and derived the vehicular data to draw time-space diagram for the microscopic analysis. The paper analyzed the traffic characteristics using flows, speeds and densities variation and investigated the conditions of breakdown occurrence with the time-space diagrams. The breakdown phenomenon was identified at weaving section and the propagation from free flow to synchronized flow was observed in this study. In the future, the findings help develop the traffic operational algorithm to manage the traffic congestion under ubiquitous circumstance since the conditions of breakdown Phenomenon can be understood more.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.569-575
• /
• 2010

The occupancy based O/D is essential for measuring efficiency of various transportation policies like HOV/HOT lane, ramp metering, and public parking station. There has been many studies on occupancy survey methodology and O/D estimation using TCS (Toll Collection System) data separately. The occupancy O/D estimation methodology using TCS data has not been attempted thus far. An overall process from data collection stage to the occupancy O/D estimation stage has been suggested. Field survey was performed at the northbound Seoul toll station of Gyeongbu Expressway by each 2 hours of AM peak, PM non-peak, PM peak, midnight periods on a day. The process of matching the TCS data and field survey data classified by tollbooth ID, car type/mode, and arrival time was also performed. One typical output of the results showed that the ratio of single occupancy vehicles bounding for Seoul during the AM peak amounted to 60%. With the key output of this study and the specific O/D estimation methodology suggested, the whole centroid-to-centroid occupancy O/D of the country could be available, and then various applications in which the occupancy information is required could be possible.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.146-157
• /
• 2016

The objective of this study is to actualize a statistical model of the 3-detector simplification model, which was proposed to detect outbreak situations by Daganzo in 1997 and to verify the statistical appropriacy thereof. This study presents the calculation process of the 3-detector simplification model and realizes the process using a statistics program. Firstly, the model was applied using data on detector of the main highways on which there is no entrances or exits. Moreover, in order to statistically verify the 3-detector simplification model, accumulative traffics for 30 seconds period, which reflects the dynamic changes of traffics due to shock wave, were estimated for outbreak traffics and steady flow, and the error of acquired data was statistically compared with that of the actual accumulative traffics. As a result, the error ratio between steady and incident cumulative flows has reached its maximum after 2-3 hours from an accident. Moreover, the incident traffic flows by accidents and the stade flows are heterogeneous in terms of their dispersion and means.