• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.532-535
• /
• 2009

본 논문은 초고압 전력케이블의 접속재 개발을 위한 연구결과로써, 접속시스템의 핵심기술인 고절연 고무슬리브 및 현장에서 접속 작업의 용이성을 위한 Carrier Pipe의 구조해석과 전기적 절연설계에 의한 주요부의 전기적 특성과 전계의 집중을 완화하기 위해 Simulation Tool을 이용한 수치해석 등을 실시하여 최적화된 제품을 제작하였다. 절연설계 및 전계완화 해석에서는 고절연 고무슬리브 구조에서 전계가 집중될 수 있는 중요 포인트를 벡터로 선정하였고 이를 기초로 전계해석을 진행하여 선정된 포인트들에서 전계가 집중됨을 검증하였다. 접속재의 수축거동 해석에 의하면, Carrier Pipe의 구조적 안전성을 확보하기 위하여 고절연 고무슬리브로부터의 압력을 구하여 계산한 결과 최소한 9mm이상의 Carrier Pipe 두께가 필요한 것으로 파악 되었다. 이것은 충분한 강도뿐만 아니라 Carrier Pipe의 변형발생으로 인한 현장에서의 설치문제까지 고려하게 된 값이다. 고절연 고무슬리브 제품설계 에서는 고절연 고무슬리브의 특성조건을 설정하였고 고절연 고무슬리브 제품 및 Carrier Pipe의 Interface 설계 기준을 파악하기 위하여 기존의 고절연 고무슬리브를 활용하여 Carrier Pipe와의 장착 Test를 진행하였다. 그 결과, 확장비율 110%로 적용하였을 경우는 30시간 후에는 완전 붕괴가 되었고, 붕괴가 시작되는 지점이 고절연 고무슬리브의 중앙매립전극 경계면으로써, Simulation Tool을 활용한 접속재 수축 거동 해석 결과와도 일치함을 검증 할 수 있었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.1
• /
• pp.53-60
• /
• 2009

Isolated structures use devices such as high damping rubber bearings (HDRB) in order to dramatically reduce the seismic forces transmitted from the substructure to the superstructure. The laminated rubber bearing is the most important structural member of a seismic isolation system. The basic characteristics of rubber bearings have been confirmed through compression tests, compressive shearing tests and creep tests. This paper presents the results and analysis of a 1000hr, ongoing creep test conducted at 7.5MPa, 8.37MPa in our laboratory. The long-term behavior of bridge bearings, such as high-damping rubber bearings, will be discovered through a compression creep test subjected to actual environmental conditions. These tests indicated that the maximum creep deformation is about $0.3{\sim}1.92%$ of total rubber thickness.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.71-77
• /
• 2016

Characteristic of thermal reaction of Kevlar/EPDM internal insulator used in a solid rocket motor chamber was investigated at 1,030 psi, 35.86 s and 1,406 psi, 36.63 s. Surface status after test was similar each other and thermal destruction depth was 4.10 mm and 4.18 mm, respectively. Kinetic constant ${\xi}$, ${\zeta}$ and thermal destruction velocity $V_{TD}$ were also similar. It was concluded that characteristics of thermal reaction of Kevlar/EPDM internal insulator were not affected by change of chamber pressure.

• Composites Research
• /
• v.12 no.6
• /
• pp.83-89
• /
• 1999

The impact strength and fracture behavior of rubber/polymer composites were investigated with respect to two factors: (i) characteristic ratio, $C_{\infty}$ as a measure of chain flexibility of the polymer matrix and (ii) the rubber particle size in polymer blend system. In this study C was controlled by the composition ratio of polyphenylene oxide (PPO) and polystyene (PS). Izod impact test and fractographic observation of the fracture surface using scanning electron microscope were conducted. Finite element analysis were carried out to gain understanding of plastic deformation mechanism (shear yielding and crazing) of these materials. Shear yielding was found to be enhanced when the flexibility of matrix polymer was relatively low and the rubber particles were small.

• Elastomers and Composites
• /
• v.18 no.2
• /
• pp.51-59
• /
• 1983

The dielectric properties of polymers are very important when investigating the molecular structure of polymers. The characteristics of the dielectric absorption in vulcanized natural rubber were studied in frequency ranging from 10[KHz] to 32[MHz] at the temperature of 25[$^{\circ}C$]. As a result of the study, it has been confirmed that natural rubber vulcanized below 4phr leads to two kinds of dielectric losses due to the interfacial polarization and the dipole polarization by sulfur, and of above 7[%] was only a loss due to the dipole polarization by sulfur. Futhermore, the dielectric loss maximum $tan{\delta}$ spectrum, removed to the low frequency in accordance with increasing sulfur, depends greatly on sulfur. The volume resistivity of $10^{7}{\sim}10^{11}[{\Omega}{\cdot}cm}]$, regardless of whether the crosslinking of rubber is weakened by sulfur, was observed.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.2
• /
• pp.41-47
• /
• 1993

Electrical and electromagnetic wave absorbing properties of MnZn ferrite-rubber composites have been examined for varying the volume fraction of ferrite powder from 0.1 to 0.4 in the frequency range between 1-10 GHz. As the volume fraction of MnZn ferrite increased, the complex permittivity and permeability of composite increased. The peak of reflection loss at the frequency corresponding to 1/4 wavelength shifts to lower frequency, and shifts to lower frequency as the thickness of absorber increased. We show that for the ferrite-rubber composites the volume fraction of ferrite should be controled to obtain the absorbing properties required in given frequency range.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.76-83
• /
• 2010

In this paper, we propose a method that converts a inputted real image to a image feeling like printmaking. That is, this method converts a inputted real image to man made rubber printmaking style image using image processing techniques such as spatial filters, image bit-block transfer, etc. The process is as follows. First, after detecting edges in source image, we get the first image by deleting noise lines and points, then by sharpening. Secondly, we get second image using the similar method to the first image. Finally, we blend the first and the second image by logical AND operation This processing enables us to represent rubber panel and knife effects. Also, the proposed method shows that double edge detecting is effective in enhancing line-width and removing the tiny lines.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.587-592
• /
• 2021

Change in the cortical thickness of long bones occurring with aging and osteoporosis is known to be a risk factor for fracture. The present study aims to investigate the dependencies of phase velocities of ultrasonic guided waves on the cortical thickness in 7 soft tissue-bone mimicking phantoms consisting of acrylic plates covered by a 2 mm-thick silicone rubber layer by using the axial transmission technique with a pair of transducers with a center frequency of 200 kHz and a diameter of 12.7 mm. Two distinct propagating waves with different velocities, the First Arriving Signal (FAS) and the Slow Guided Waved (SGW), were consistently observed for all the soft tissue-bone mimicking phantoms. The FAS velocity decreased slightly with increasing thickness, whereas the SGW velocity increased strongly with increasing thickness. The FAS and the SGW velocities were found to be closely consistent with the S0 and the A0 Lamb mode velocities for a free acrylic plate, respectively, suggesting that the presence of the soft tissue mimicking material (2 mm-thick silicone rubber layer) covering the acrylic plates does not influence significantly the velocity measurements.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.1
• /
• pp.38-47
• /
• 1989

The optimal mounting system for reciprocating comperssor supported on a flexible is designed. Four short hollow rubber cylinders are used as mounting pads, and so the thickness, diameter, height and location of the rubber mounts are considered as design parameters. The optimal mounts parameters which give the smallest force transmittance, are obtained by Constrained Rosenbrock Method.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.32-36
• /
• 2016

Test equipment was designed and manufactured to evaluate thermal reaction characteristic of internal insulators of solid rocket motor. Test is allowed up to chamber pressure 2,500 psi, burn-time 100 s. A cross section of test sample part is quadrature, and various test samples can be comparable at the same time. Inner temperature of test sample can be measured by thermocouples during burning. Test was executed in condition of efficient average chamber pressure 1,000 psi, efficient burn-time 10 s and safety of equipment was confirmed. Basic data for understanding thermal characteristics of internal insulator, that is, pressure-time curve, temperature-time curve in the test sample, and thermal destruction thickness of test sample was gained successfully.