• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.125-147
• /
• 2009

The Basic Environmental Policy Act (BEPA) (Law No. 4257 effective 1. August 1990) sets forth the basic policies and administrative framework for environmental preservation, leaving more detailed regulations, and emission controls to separate laws targeting air, water, and solid waste, etc. The BEPA Article 31 adopts an unprecedented strict liability standard for damages as an absolute liability. The BEPA Article 31 provides for liability as follows. If a company is alleged to have caused damage through pollution of the environment, it will be liable for damages unless it can show that the pollution did not cause damages, or that it did not actually cause pollution. If the company did cause pollution, and if the pollution is the cause for the damages in question, the company will be liable irrespective of whether it was negligent or otherwise at fault. If there are two or more companies involved in the pollution, but it is unclear which company caused the damages, all of the companies will be jointly and severally liable for the damages. In this paper, the author attempts to uncover the problems of BEPA Article 31 and then seeks desirable amendments by comparing it to the German Environmental Liability Act. First, it will be necessary to provide definitions of 'companies etc.'. Second, it will be necessary to enumerate the kinds of company facilities. Third, it will be necessary to provide exclusionary clauses on material damages. Fourth, it will be necessary to show 'presumption of cause and effect'. Fifth, it will be necessary to provide a clause on 'right to information'. Sixth, it will be necessary to provide a clause for force majeure. Seventh, it will be necessary to take measures to secure abundant liability for damages which can be caused by the owner of the facility, the potential polluter. Finally, it is appropriate that Korea now legislate an Environmental Liability Act akin to the German Environmental Liability Act.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.663-674
• /
• 2019

Birds are effective ecological indicators but there is no national protocol in place to monitor population dynamics of forest birds in Korea. To support the establishment of future monitoring protocols, we compared the results of two generally used monitoring methods for forest bird surveys in two temperate mixed forests in central Korea. There was no statistical difference in the number of species and individuals detected per unit survey effort when comparing line transects and point counts. The number of species and individuals were higher in a five-minute count than in a three-minute point count, but the total accumulated number of expected observed species showed no difference between the two count durations. The number of observed species and individuals increased in both methods as plot radius or transect width increased, suggesting that multi-layer or multi-band surveys may be useful for quantitative and qualitative objectives. The decreasing number of observed species and individuals after sunrise suggested that bird monitoring should be conducted earlier in the morning, within four hours after sunrise. To detect 70% of the total number of species, 7.0 to 7.6 survey hours, equivalent to 42 three-minute counts (95% confidence interval [CI]: 26 to 61) or 33 five-minute counts (95% CI: 19 to 53) were needed for unlimited radius point counts. On the other hand, 4.8 survey hours, equivalent to 26 line transect counts (95% CI: 15 to 45) using 200-m transects with unlimited width, were required to achieve the same level of species detection. Therefore, the line transect method may be more effective than the point count method, at least in terms of local species richness assessment. For national forest bird monitoring, our data indicated that one or both survey methods can be selected as a basic protocol, based on the goals and scales of monitoring, forest types, and the conditions of the target areas.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.5
• /
• pp.576-584
• /
• 2000

Background : With the increase of cigarette consumption by women and the young, the incidence of lung cancer is expected to increase during the next three or four decades in Korea. The purpose of this study was to analyze the smoking habits in patients with lung cancer and to identify the gender differences in terms of their susceptibility to cigarette related carcinogens. Method : This investigation was a hospital-based case control study, which included the data of 178 case subjects (72 females, 106 males) with lung cancer and 218 control subjects (97 females, 121 males) with diseases unrelated to smoking. The information was obtained through a direct personal interview and a questionnaire related to personal smoking history. Results : The relative frequency of the squamous cell carcinoma was substantially higher in males than in females (61.3% in males, and 29.2% in females), while adenocarcinoma including bronchoalveolar cell carcinoma was higher in females(31.9% in females, 18.9% in males). Kreyberg I lung cancer was of relatively higher frequencies in males and smokers, while Kreyberg II lung cancer was higher in females and never smokers. The odds ratios (ORs) at each exposure level were consistently higher in females than males. For all cell types, the risk of lung cancer was increased with the quantity of smoked cigarettes, duration of smoking, and depth of inhalation. Odds ratio was distinctly higher in Kreyberg I lung cancer than in total lung cancer and a steeper gradient of risk with increased smoking was observed in females. Conclusion : The relative risk for lung cancer was consistently higher in females than in males at every level of exposure to cigarette smoke. This is believed to be due to the higher susceptibility of females to tobacco carcinogens, such as gender associated differences of carcinogen activation and/or the elimination of smoking related metabolites.

• Tuberculosis and Respiratory Diseases
• /
• v.63 no.2
• /
• pp.154-164
• /
• 2007

Background: Irinotecan hydrochloride, a topoisomerase I inhibitor, is effective against small-cell lung cancer. Irinotecan also can act as a potential radiation sensitizer along with cisplatin. To evaluate efficacy and toxicity of irinotecan plus cisplatin (IP) with concurrent thoracic radiotherapy, we conducted a phase II study of IP followed by concurrent IP plus hyperfractionated thoracic radiotherapy in patients with previously untreated limited-stage small-cell lung cancer. Methods: Twenty-four patients with previously untreated small-cell lung cancer were enrolled onto the study since November 2004. Irinotecan $60mg/m^2$ was administered intravenously on days 1 and 8 in combination with cisplatin $60mg/m^2$ on day1 every 21 days. From the first day of third cycle, twice-daily thoracic irradiation (total 45 Gy) was given. Prophylactic cranial irradiation was given to the patients who showed complete remission after concurrent chemoradiotherapy. Restaging was done after second and sixth cycle with chest CT and/or bronchosocpy. Results: Up to November 2004, 19 patients were assessable. The median follow-up time was 12.5 months. A total of 99 cycles (median 5.2 cycles per patient) were administered. The actual dose intensity values were cisplatin $19.6mg/m^2$/week and irinotecan $38.2mg/m^2$/week. Among the 19 patients, the objective response rate was 95% (19 patients), with 9 patients (47%) having a complete response (CR). The major grade 3/4 hematological toxicities were neutropenia (35% of cycles), anemia (7% of cycles), thrombocytopenia (7% of cycles). Febrile neutropenia was 4% of cycles. The predominant grade 3/4 non-hematological toxicities was diarrhea (5% of cycles). Toxicities was not significantly different with concurrent administration of irinotecan and cisplatin with radiotherapy, except grade 3/4 radiation esophagitis (10% of patients). No treatment-related deaths were observed. The 1-year and 2-year survival rate of eligible patients was 89% (16/18) and 47% (9/18), respectively. Conclusion: Three-week schedule of irinotecan plus cisplatin followed by concurrent IP plus hyperfractionated thoracic radiotherapy is an effective treatment for limited disease small-cell lung cancer, with acceptable toxicity.

• Korean Journal of Environment and Ecology
• /
• v.21 no.5
• /
• pp.400-414
• /
• 2007

This study has analyzed the vegetation structure to suggest a vegetation ecological restoration model by using the case of the afforestation for erosion control area with Pinus koreaiensis and Betula platyphylla, etc., on the hills of the Young-in mountains after its great fire in 2000. Of the area having a dimension of $1,152,404.3m^2$ selected as a survey site for the existing vegetation, the forest fire area accounted for 69.2% among which, brushwoods accounted the most for 24.67%. As a result of analysis of the 27 surveyed unit plots[unit dimension: $100m^2$] set up in consideration of the existing vegetation pattern and damaged state from the forest fire, the surveyed area was classified into 10 communities. Shrub layer's vegetation was found to be dominant in forest fire areas and the surveyed sites were classified into 5 plant communities, i.e. P. koraiensis community, Quercus variabilis community, P. thunbergii community, Q. serrata community, B. platyphylla community in forest fire areas, while non-forest fire areas were classified into 5 plant communities, such as P. densiflora community, Q. acutissima community, Q. serrata community, Q. mongolica-Q. serrata community, B. platyphylla community. Species diversity of forest fire areas was $0.3679{\sim}0.5907$ and that of non-forest fire areas was $0.5728{\sim}0.8865$. In addition, the number of the species in the forest fire areas was $5{\sim}8$ and that of non-forest areas was $8{\sim}12$; however, the population of forest fire areas$(156{\sim}456)$ was higher than that of non-forest fire areas$(61{\sim}227)$. In the analysis of growth density per layer$[of\;100m^2]$, there appeared $1{\sim}8$ trees of Q. mongolica and $3{\sim}5$ trees of Q. serrata in the upper layer species; $2{\sim}4$ trees of Q. serrata and one tree of Q. mongolica in the canopy layer. As for the characteristics of soil, acidity of forest fire areas was pH 5.45 and that of non-forest fire was pH 5.25. By setting up the middle D.B.H range of Q. mongolica-Q. serrata community as the vegetation restoration model, planting species, planting density and planting models are suggested.

• Progress in Medical Physics
• /
• v.26 no.2
• /
• pp.87-92
• /
• 2015

The gated RapidArc may produce a dosimetric error due to the stop-and-go motion of heavy gantry which can misalign the gantry restart position and reduce the accuracy of important factors in RapidArc delivery such as MLC movement and gantry speed. In this study, the effect of stop-and-go motion in gated RapidArc was analyzed with varying gating window time, which determines the total number of stop-and-go motions. Total 10 RapidArc plans for treatment of liver cancer were prepared. The RPM gating system and the moving phantom were used to set up the accurate gating window time. Two different delivery quality assurance (DQA) plans were created for each RapidArc plan. One is the portal dosimetry plan and the other is MapCHECK2 plan. The respiratory cycle was set to 4 sec and DQA plans were delivered with three different gating conditions: no gating, 1-sec gating window, and 2-sec gating window. The error between calculated dose and measured dose was evaluated based on the pass rate calculated using the gamma evaluation method with 3%/3 mm criteria. The average pass rates in the portal dosimetry plans were $98.72{\pm}0.82%$, $94.91{\pm}1.64%$, and $98.23{\pm}0.97%$ for no gating, 1-sec gating, and 2-sec gating, respectively. The average pass rates in MapCHECK2 plans were $97.80{\pm}0.91%$, $95.38{\pm}1.31%$, and $97.50{\pm}0.96%$ for no gating, 1-sec gating, and 2-sec gating, respectively. We verified that the dosimetric accuracy of gated RapidArc increases as gating window time increases and efforts should be made to increase gating window time during the RapidArc treatment process.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.207-216
• /
• 2020

Purpose: To compare the polishing characteristics and their influence on Candida albicans adhesion to the recently introduced polyetherketoneketone (PEKK) and the conventional polymethylmethacrylate (PMMA) denture resin material. Materials and methods: Specimens from PEKK (Group E) and PMMA (Group M) were made in dimensions of 8 mm in diameter and 2 mm in thickness. The specimens were further divided into sub-groups according to the extent of polishing (ER, MR: rough; EP, MP: polished, N = 12 each). The specimens were polished using polishing machine and SiC foil. ER and MR group specimens were polished with 600 grit SiC foil only. EP and MP groups were further polished with 800, 1,000, 1,200 grit SiC foils sequentially. To measure the surface roughness values (Sa) of specimens, atomic force microscope (AFM) was used and scanning electron microscope (SEM) observation under 1,000, and 20,000 magnifications was performed to investigate surface topography. The polished specimens were soaked in C. albicans suspension for 2 hours with shaking to promote adhesion. The attached C. albicans were detached from the surface with 10 times of pipetting. The suspension of detached C. albicans was performed by serial dilution to 10³ times, and the diluted suspensions were inoculated on Sabouraud dextrose agar plates using spread plate method. After incubating the plate for 48 hours, colony forming unit (CFU)/plate of C. albicans was counted. Statistical analysis was performed using one-way ANOVA and Tukey HSD test to confirm significant difference between the groups (α=.05). Results: Average Sa value was significantly higher in MR group compared to other groups (P<.05), meaning that additional polishing steps reduced surface roughness effectively only in the PMMA specimens. There was no significant difference in Sa values between MP and EP groups. In SEM images, PEKK specimens showed numerous spikes of abraded material protruding from the surface and this phenomenon was more significant in EP group. The mean CFU/plate value was the highest in EP group and this was significant when it was compared to MP group (P<.05) which was the lowest. Conclusion: Polishing PEKK using serial SiC abrasive foil may result in higher adhesion of C. albicans. In clinic, this should be considered carefully.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.673-682
• /
• 2001

The use of resin composites has continued to increase over the last several years. In spite of their growing popularity, composites continue to exhibit a number of undesirable characteristics. One of the major deficiencies of composite restorative resins is their inadequate resistance to wear. Of the multitude of factors that have been associated with wear, subsurface degradation within the restoration is considered to be one. The aim of this study was to evaluate the resistance to degradation of four commercial composite resins in an alkaline solution. This solution with a high concentration of hydroxyl ions is a convenient medium for accelerated degradation of silane coupling and filler particles. The brands studies were Definite($Degussa-H\ddot{u}ls$ AG, Germany), Prodigy(Kerr, USA), Pyramid(Bisco, USA) and Synergy(Coltene, Swiss). Preweighed discs of each brand were exposed to 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCl, washed with water and dried. Resistance to degradation was evaluated on the basis of following parameters : (a) mass loss(%)-determined from pre-and post-exposed specimen weights : (b) Si loss(ppm)-obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation $depth({\mu}m)$-measured microscopically (SEM) from polished circular sections of exposed specimens. The results were follows: 1. Mass loss of Synergy was $1.24{\pm}0.002%$, it was the highest, there was no significant difference among the materials. 2. The degree of degradation layer depth of Synergy was $107.83{\pm}2.52{\mu}m$, it was the highest, there was no significant difference among any other materials than Synergy. 3. There was no difference among the four materials in Si loss. 4. The correlation coefficient between mass loss and degradation depth was relatively high(r=0.06, p<0.05). 5. There was no coefficient correlation between Si loss and mass loss, the degree of degradation layer depth and Si loss. 6. When observed with SEM, destruction of bonding is observed between resin matrix and filler.

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.2
• /
• pp.87-94
• /
• 2007

Objective: To examine determinants of successful pregnancy and evaluate COH-IVF outcomes of infertile patients after conservative surgical treatment of borderline ovarian tumor (BOT). Methods: In women of BOT (n=93), from January 1995 to December 1999, 44 of 93 women underwent conservative surgical treatment. From theses 44 women, patients characteristics, surgical and histological parameters were compared between 14 women who conceived and 30 women who failed to conceive. For 5 infertile women of 30 women who failed to conceive, 10 attempt IVF cycles were analysed; clinical pregnancy rate (CPR), implantation rate (IR) and live birth rate (LBR). Results: Women who conceived tend to be younger (25.9 vs 27.0 years) and lower serum CA-125 level (59.7 vs 72.9) compared to women who failed to conceive without significant difference. For 8 cycles out of 10 attempt IVF cycles, except for 2 cancellation cycles, the mean number of oocytes retrieved was 5.6 (range 2$\sim$16) with a mean fertilization rate of 74.4%. The CPR, IR and LBR per embryo transfer were 50.0% (4/8 cycles), 31.6% (6/19) and 50.0% (4/8 cycles) respectively. During the mean follow-up period after COH-IVF initiation, 29.6 (range 14$\sim$61) months, no recurrence was found. Conclusion: No determinant of successful pregnancy was found after conservative treatment for BOT. COH-IVF may be considered for infertile patients after conservative treatment of BOT. However, larger clinical studies with longer follow-up are necessary to evaluate the safety and efficacy of COH-IVF. All patients should be informed of the potential risks associated with ovarian hyperstimulation and close follow-up is necessary after COH-IVF.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.253-264
• /
• 2012

This study was carried out to investigate growth characteristics, yield, chemical compositions and nutrients yield of corn hybrids for silage in the newly reclaimed hilly land. The experimental design was arranged in a randomized block design with three replications. The seeding time was at May 6. The harvest time of four treatments was milk stage (97 days), dough stage (105 days), yellow stage (112 days) and late yellow stage (119 days after seeding). Plant height, ear height, leaf numbers and ear length were highest in yellow stage (p<0.05, 0.01), but dead leaf, stem hardness and sugar degree (Brix) were higher in late yellow than other treatments. Leaf width, tip filling degree and fresh yield were not significantly different. Dry matter yield increased as the maturity stage progressed (p<0.01). Crude protein and crude fat were not significantly different. NDF and ADF decreased as the maturity stage progressed (p<0.01). Ca content was the highest at milk stage (p<0.05), Fe and P were the highest at dough stage (p<0.05, 0.01). However another minerals were not significantly different. Essential amino acid (EAA), nonessential amino acid (NEAA) and total amino acid were highest at yellow stage, but no significant differences were found among the treatments. Total free sugar contents were higher in the order of Milk > dough > yellow > late yellow stage, but no significant differences were found among the treatments. Crude protein yield was the highest at yellow stage, but crude fat yield, amino acid yield and TDN yield were highest at late yellow stage (p<0.01). Total mineral yield showed no significant difference. Based on the above results, yellow and late yellow stage compared to other maturity stage have been shown to increase dry matter yield and nutrients yield, when silage corn grow cultivate in the newly reclaimed hilly land.