• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.112-113
• /
• 2021

선박을 주로 하는 자율 해상 모빌리티의 안전한 운항을 위해 필수적인 직접통신의 필요성에 대응하여 M-S2X 통신 개발 방안을 제시한다. M-S2X 통신을 선박중심 직접통신, SCDC(Ship Centric Direct Communication)으로 정의하며 선박과 선박 통신 중에서 선박과 선박 통신의 대용량 및 고속화가 필요한 점, 그리고 선박 운항 안전을 위한 통신 수요의 대부분이 선박을 중심으로 그 주변 객체와 상호 통신이 필요한 점을 고려한 것이다. 관련 연구에서 선박과 선박, 선박과 육상 간 통신 소요를 제시하였고 이를 통해 기존 AIS등의 레거시 해상통신만으로는 자율운항선박과 같은 해양 모빌리티의 자율성 확보에 어려움이 있음을 알 수 있다. 이에 따라 M-S2X 통신을 구현하는 기술로 VDE와 비면허대역과 같은 고대역의 통신기술을 활용하여 선박과 같은 해양 모빌리티가 주변의 객체(선박, 해양모빌리티, 인프라, 익수자 등)와 직접 통신할 수 있는 통신 인프라 환경을 제공한다면 향후 도래할 해양 모빌리티 환경의 기본 통신 기술로 활용될 수 있을 것이다.

• Economic and Environmental Geology
• /
• v.55 no.2
• /
• pp.137-148
• /
• 2022

In this study, ship movement simulation was performed based on a marine physics model for the ancient port presumed under the past environmental conditions in the coastal area of Hwaseong, which played an important role as a center of trade in the Three Kingdoms and Unified Silla periods. The paleo topographical surface was reconstructed through the analysis of borehole sediments, and the paleo coastline was extracted through the geomorphological maps published during before independence. Based on the established paleo environmental conditions of the Hwaseong coast, the marine physics model (FVCOM) was used to simulate the flow of surface currents and the route of floating materials assumed to be ancient ships. As a result, the processes of moving ships from the port to the open sea in the Eunsupo area, which is estimated location of the ancient port related to Dangseong, was well simulated, and thus the reliability of the location of the ancient port estimated by the scientific method was secured. This study is significant as a result of convergence research that encompasses archeology, history, geomorpology, geology, and oceanography.

• Korean Journal of Heritage: History & Science
• /
• v.13
• /
• pp.14-21
• /
• 1980

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.341-350
• /
• 2015

The preservation has been conducted for wooden ship timber excavated from Bonghwang-Dong, Gimhae, Korea. The species were analyzed for conservation as pre-treatment. Outer panel was analyzed as Cinnamomum spp. and trapezoid wooden material, wooden wedge was Cryptomeria japonica D. Don.. Wooden ship timber have been treated by vacuum-freeze drying after impregnation with aqueous PEG#3,350 solution(almost 45%). The timber of Bonghwang-Dong ship is considered as Japanese ship that many data such as conformation of ship, location of site, japanese artifact of around site were confirmed. In addition, The ship timber give us the important information about the international trade with Japan.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.849-854
• /
• 2013

Many researches on green ship with increasing on economics, efficiency and convenience have been carried out consistently. One of them is development of diesel engines with electronic control. While small duty one for automobiles had been adopted mainly already, disseminating heavy duty one for ships has trouble due to safety and reliability. In order to solve these problem in this study, performance of electronic control and cam type engine installed in parallel on training ship HANBADA of korea maritime university was analyzed and compared. It is certain that specific fuel oil consumption of the electronic control type is lower than cam type and excellent at lower engine load, especially. And the electronic control type shows more effective characteristic at sea trial on specific fuel oil consumption.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.593-597
• /
• 2003

Ennin was a Japanese buddhist monk who stayed in Tang from Jun. 13, 838 A.D. to Dec. 14, 847 A.D. in lunar's calender and wrote lengthy diary through the travel. This diary contained lots of information on the politics, economy, social culture, religion, diplomatic policies, militaries, geography, transportations and administrations of Tang China. Especially the beginning of his diary dated from Jun. 13, to July 3, 838 A. D. was recorded in the manner of ship's logbook entries. Many terms of navigation and naval architecture appeared on it. It is very important to understand them for studying ancient ship and its navigation skill. This paper aims to investigate the meaning of ‘Nu-A’ obviously referring to some part of hull of the ship as the first step to annotate the terms of navigation and naval architecture which were appeared in the diary.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.352-359
• /
• 2021

This paper presents the definition and importance of ship-centric direct communication concerning ship safety of maritime autonomous and unmanned ships. It also proposes the concept of MX-S2X communication based on high frequency for wide-bandwidth technology and describes the design and simulation result for the physical layer of MX-S2X. It considered high-speed communication as well as overcoming maritime multi-path fading required to be resolved in the marine environment. The physical layer of MX-S2X communication was designed to overcome the occurrence of error-floor caused by multi-path fading even with receiving sufficient signal strength. To this purpose, a performance analysis was conducted on the physical layer by applying the channel model of the actual maritime communication environment. As a result of the performance analysis of the MX-S2X physical layer, it was confirmed that the BER error-floor observed in the VDE physical layer test was overcome, and it operated within the SNR 2dB degradation range compared to the AWGN channel. It is expected that this will show enough performance suitable for short-distance ship-centered direct communication and can be used for direct communication of maritime autonomous ships, unmanned ships, and group navigation of themshortly.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.240-245
• /
• 2014

As the seriousness of the global environment pollution is gaining our attention recently, researches on application of greenhouse gas emission of ship are being carried globally. However domestic study on greenhouse gas emission from ship was not carried out in various fields. In this study, quantitative data which was presented by greenhouse gas emission of training ship HANBADA and greenhouse gas emission was calculated by Tier 1 method based on total fuel consumption and amount of shore power. Actual voyage data for 1year in 2012 was used to analysis the greenhouse gas emission. This study showed how many weight of gases were exhausted per 1 gross tonnage and per 1trainee in the training ship. There is a need of further research to reduce pollutant and to respond to international environment regulation consistently.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.611-616
• /
• 2013

Many researches have been carried out consistently for the green ship owing to its economic increasement, efficiency and convenience. One of them is an electronic controlled marine diesel engine. However, we are suffered from dissemination of above engine, due to its anxiety about safety and reliability. In order to solve these problems in this study, emission characteristics test of main propulsive two-stroke diesel engine, equipped both electronic control and cam drive fuel injection systems, has been performed and evaluated under the various load conditions. From the test results, we have confirmed that exhaust gas emission characteristics of the electronic control system is similar to the cam drive system in eco-mode operation, but NOx in emission mode has been decreased 100ppm or more in full load condition. HC emission from the electronic control system is decreased 10~20ppm at 50% load, and 35~40ppm at 25% load in comparison to cam drive system. In fuel consumption, it is considered that 7g/kWh is decreased than the value of cam drive system at 700bar of injection pressure, which is 200bar higher than cam drive system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.389-394
• /
• 2017

In a conventional ship structure, stiffeners with an asymmetric section, such as inverted angles, are used widely despite the disadvantage of strength compared to the stiffeners with a symmetric section, such as a built-up T. On the other hand, T-type built-up members are attracting more attention than L-type inverted angles due to the increased size of ships. The purpose of this study was to develop an optimal design program for a built-up T, and apply an evolution strategy as an optimization technique. In the optimization process, the gross thickness concept was adopted for the design variables and objective function, and the constraints are set up based on HCSR (Harmonized Common Structural Rules). Using the developed program in this study, the optimal stiffener design was carried out for 300K VLCC and 158K COT of which the orders were obtained lately. The optimal results revealed the weight reduction effect of 144 tons and 60 tons, respectively.