• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.21-30
• /
• 2005

Traffic volume data have been used for the plan, the design, and the operation of highway. Since 1955, traffic survey has been nation- widely carried out at national highway and the regular survey in national highway has been conducted at the intersections of highways. However, it is critical issue to select the priority of the regular survey because it is almost impossible to conduct regular survey at all intersections of national highways. In this study, MCDM(Multiple Criteria Decision Making) using AHP(Analytic Hierarchy Process) was applied to decide the priority of the regular survey. The following standard variables for determining the priority was selected the highway plan variables[AADT, VKT, Peak Hourly Volume, Location of highway from Urban], the highway design variables[Volume(pcu), Directional Traffic Volume, Heavy Vehicle Rate], and the highway operation variables[Speed, Density, V/C]. The standard variables were quantified and normalized. Using the Eigen vector method, the weighted values of each hierarchy based on the pair-wise comparison values from the questionnaire survey were calculated. The selection of the priority of regular survey was dependent on the size of the product of the weighted values for each hierarchy and the normalized values for the standard variables. Finally, the priority of regular survey of the intersections of national highways was determined according to the order in the size of the product of two values.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.127-140
• /
• 1993

The purpose of this paper is to examine the possible benefits of combining transportation planning models with geographic information systems (GIS) in the hope that intergrating these systems can alleviate the inherent problems of transportation planning models such as user unfriendliness, labor intensiveness, and theoretical limitations. Specially, this paper focuses on the issue of incompatiblity between GIS and the conventional transportation planning models in dealing with network topologies. Resolving this conflict in topologies is a conerstone for eliminating the user-unfriendliness and labor-intensiveness issues. This paper presents the development of an algorithm that converts GIS topology into transportation network topology. The FORTRAN-based topology conversion algorithm generates transportation networks from the GIS cartographic file and establishes a communication charmel between the two systems.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.47-58
• /
• 2009

Calibrating toll roads of highway networks needs additional weights within volume delay functions not like other general highway lints. However, current methods assigning additional weights in the volume delay function of toll roads are not sufficiently enough to predict real toll road volumes measured, since it does not consider discounting rates and an extra charges. This study develops methods to improve relevant and reliable volume delay functions. Suggested ideas include a method of weighting volume delay functions considering a value of time of vehicle types, a method of weighting volume delay functions considering lane distributions of vehicles, and a method of weighting volume delay functions considering percentages of link lengths per a number of lanes of toll roads. It is found that the method of weighting volume delay functions considering lane distributions of vehicles show most reliable and appropriate results, while the first method shows overestimation and the third method does underestimation of highway link volumes. In terms of assignment methods, total OD equilibrium assignment shows better results than PCU based assignment.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.8
• /
• pp.403-410
• /
• 2008

The noise problem became more serious by the rapid urban population growth and traffic. This study estimates the noise level considering actual traffic volume and building shape and location. Based on the state of the arts noise level, changing amount of noise that was controlled by the speed control and truck and passenger car restriction is calculated. Some conclusion is found out. The 2-D type more than 3-D type is more than over standard of noise pollution and night time's over rate is larger than day time. And in the case of various solutions are used instead of applying one solution, noise pollution is effectively reduced.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.631-638
• /
• 2023

This paper is to introduce methodologies of travel time reliability evaluation using daily traffic volumes. The methodologies include desirable speed concept, the relation between averaged daily speeds and daily traffic volumes, the standardized way in integration of travel time deviations obtained from continuous highway sections. The study began with traffic data collection from a freeway line with long lasting congestion. And then, provided establishment of the relation between averaged daily speeds and daily traffic volumes, and usability of Point estimate method (PEM) to integrate travel time deviations of sections. Based on the relation between averaged daily speeds and daily traffic volumes, it is identified that travel time reliability begins to decrease around LOS (Level of Service) C even before LOS D or F. It may be concluded that travel time reliability could be evaluated based on daily traffic volumes in highway sections using standardized PEM. The methodologies introduced in the paper, could be useful in practicing evaluation of travel time reliability during the works of highway operation or highway planning.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.41-48
• /
• 2009

The capacity analysis of signalized intersection usually includes a HCM method used at home and abroad and a ICU method this study presents. The HCM method focuses on operation analysis measuring an intersection's delay in terms of given traffic volume, signal operation, and intersection structure data. This method includes planning and design analysis, but these analyses are complex due to being possible through repetitive operation analysis. However the ICU method is a powerful tool for planning and design analysis, because these are possible through brief traffic volume and geometry structure data and consider minimum green time. In this study, the authors studied the ICU method and compared the HCM and ICU by analyzing traffic volume scenarios. Also to consider effectiveness for application of the ICU method, the authors applied the ICU to capacity analysis of intersections on urban arterial for setting major intersection and effect analysis for changing crosswalk type, the number of lane, lane use and operation form of left turn. The result of the analyses shows that the ICU method can measure correct capacity of intersection consist of a broad road in urban area, and is effective for planning and design analysis. This study is expected that traffic experts can grasp correct intersection's capacity and carry out a proper planning or improvement by applying the ICU method to planning and design analysis.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.495-499
• /
• 2003

As an alternative to overcome the limitations of current popular schedule system such as Bar Chart, PERT, CPM in proving the feasibility of a given project schedule and duration, this research applies simulation to the 'Shiwha Techno-Valley project, and then reviews its usability in time management. Shiwha-Techno-Valley is a gigantic project requiring large number of equipment and resulting in traffic congestion. In particular, project site is located near the Shiwha industrial complex and Daeboo-Do tourist place. Therefore, current traffic needs should not be ignored. This research evaluates whether the project can be finished in a given time even if construction equipment increase in addition to the current traffic. Through the analysis of the simulation output, the research identifies the optimal resource input and the needs on alternative schedule for the project.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.199-209
• /
• 2008

This paper is described the concepts and limitations for the traditional directional design hour volume estimation. The main objective of this paper is to establish an estimation method of probabilistic directional design hour volume in order to improve the limitation for the traditional approach method. To express the traffic congestion of specific road segment, this paper proposed the link travel time as the probability that the road capacity can accommodate a certain traffic demand at desired service level. Also, the link travel time threshold was derived from chance-constrained stochastic model. Such successive probabilistic process could determine optimal ranked design hour volume and directional design hour volume. Therefore, the probabilistic directional design hour volume can consider the traffic congestion and economic aspect in road planning and design stage. It is hoped that this study will provide a better understanding of various issues involved in the short term prediction of directional design hourly volume on different types of roads.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.380-388
• /
• 2014

Annual average daily traffic(AADT) serves as important basic data in the transportation sector. AADT is used as design traffic which is the basic traffic volume in transportation planning. Despite of its importance, at most locations, AADT is estimated using short term traffic counts. An accurate AADT is calculated through permanent traffic counts at limited locations. This study dealt with estimating AADT using various models considering both the spatial correlation and time series data. Kriging models which are commonly used spatial statistics methods were applied and compared with each model. Additionally the External Universal kriging model, which includes explanatory variables, was used to assure accuracy of AADT estimation. For evaluation of various kriging methods, AADT estimation error, proposed using national highway permanent traffic count data, was analyzed and their performances were compared. The result shows the accuracy enhancement of the AADT estimation.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.455-462
• /
• 2007

This paper estimated the future traffic volume incoming and outgoing in Incheon port, and analyzed the value of information serviced by tidal current signal operation center in Incheon. The cargo traffic in 2020 will increase twice as much as in 2005 according to the national ports basis plan. The maritime traffic will increase greatly consequently. Also, MOMAF has operated tidal current signal operation center to prevent marine accidents caused by current influence on vessels navigating through Incheon. However the quantitative effect is not known because there is no analysis about its value. Therefore the value of information serviced by tidal current signal operation center in Incheon was calculated with contingent valuation method(CVM), and the information value was analyzed considering future traffic in this study. Thus, the annual information value was calculated at about $170{\sim}280$ million won, considered traffic volume using the information of tidal current directly in 2020 since 2006.