• Journal of the Korea Institute of Building Construction
• /
• v.22 no.5
• /
• pp.473-483
• /
• 2022

BIM(Building Information Modeling) is a technology that can manage information throughout the entire life cycle of the construction industry and serves as a platform for improving productivity and integrating the entire construction industry. Currently, BIM is actively applied in developed countries, and its use at various overseas construction sites is increasing This is unclear. due to air shortening and budget savings. However, there is still a lack of institutional basis and technical limitations in the domestic construction sector, which have led to the lack of utilization of BIM. Various activation measures and institutional frameworks will need to be established for the early establishment of these productive BIMs in Korea. Therefore, as part of the research for the domestic settlement and revitalization of BIM, this study derived a number of key factors necessary for the development of the construction industry through brainstorming and expert surveys using AHP techniques and analyzed the relative importance of each factor. In addition, prior surveys by a group of experts resulted in 1, 3 items in level, 2, 9 items in level, and 3, 27 items in level, and priorities analysis was performed through pairwise comparisons. As a result of the AHP analysis, it was found that the relative importance weight of policy aspects was highest in level 1, and the policy factors in level 2 and the cost-based and incentive system introduction factors were considered most important in level 3. These findings show that the importance of the policy guidance or institutions underlying the activation of BIM rather than research and development or corporate innovation is relatively high, and that the preparation of policy plans by public institutions should be the first priority. Therefore, it is considered that the development of a policy system or guideline must be prioritized before it can be advanced to the next activation stage. The use of BIM technologies will not only contribute to improving the productivity of the construction industry, but also to the overall development of the industry and the growth of the construction industry. It is expected that the results of this study can provide as useful information when establishing policies for activating BIM in central government, relevant local governments, and related public institutions.

• Journal of Digital Convergence
• /
• v.19 no.12
• /
• pp.243-253
• /
• 2021

In this study, AHP analysis was conducted on potential residents who are willing or likely to live in a smart city. The purpose is to identify priorities for strategic objectives. In order to establish a hierarchical structure for the vision, core values, and strategic goals of the smart city business, we researched domestic and overseas smart city-related academic papers and research reports, business plans, and institutional websites. After reviewing professors, researchers, experts, and focus groups, 4 2nd tier and 12 3rd tier properties were finally selected and the hierarchical structure was confirmed. As a result of AHP analysis, it was found that residents place the highest importance on quality of life in smart city projects. As a result of the analysis of the lower-level factors, it was found that safety was the most important. The priorities were analyzed in the order of living convenience, eco-friendliness, and social inequality resolution. It is expected that the results of this analysis will be able to suggest strategies to be established when promoting smart city projects in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.95-104
• /
• 2010

In wireless communication system, a variety of retransmission algorithms are used in order to improve the quality of service of users. But the system may be inefficient because retransmission algorithms operate independently with other layers. Also, the quality of service can be degraded due to the unnecessary retransmission of packets. To solve these problems, the study on the cross-layer retransmission schemes have been widely performed. However, in order to apply cross-layer retransmission schemes to wireless communication system, whether the performance of cross-layer retransmission schemes meets QoS requirements of each service class has to be verified. Thus, this paper proposes the mathematical model for analyzing the performance of the cross-layer retransmission schemes and derives both the suitable retransmission scheme and the optimal retransmission parameter on each service class. The proposed mathematical model selects the MCS level based on channel state information and The performance analysis is comparatively easy in case that HARQ, ARQ, and AMC schemes are combined. The proposed mathematical model also enables the analysis of the packet transmission delay. To utilize the analytical model, this paper derives the suitable retransmission scheme and the optimal retransmission parameter for delay sensitive services in WiMAX system. Also, the proposed analytical model can be used to analyze the performance of wireless communication system such as LTE and WLAN.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.633-635
• /
• 2000

본 논문에서는 프로그램을 루프 구조에 근거하여 계층적으로 표현한 HTG (Hierarchical Task Graph)의 복합 노드 태스크들을 공유 메모리 다중처리기 환경에서의 효율적 수행을 위한 새로운 스케쥴링 기법을 제안한다. 단일처리기의 멀티스레드 구조를 비롯한 여러 플랫폼에 적용하기 위해 자바의 스레드를 사용하여 구현하였으며, 기존의 HTG의 함수 병렬성을 위한 비티 벡터 알고리즘과 성능을 비교 분석하였다. 실험 결과에서 보듯이, 제안된 기법이 비트 벡트 방법에 비해 수행 시간 측면에서 효율적임을 알 수 있으며 또한, 좋은 부하 균형을 유지하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.437-438
• /
• 2018

문서 군집화 성능을 높이기 위한 한 방법으로 차원 축소를 적용한 문서 벡터로 군집화를 실시하는 방법이 있다. 본 발표에서는 특이값 분해(SVD), 커널 주성분 분석(Kernel PCA), Doc2Vec 등의 차원 축소 기법을, K-평균 군집화(K-means clustering), 계층적 병합 군집화(hierarchical agglomerative clustering), 스펙트럼 군집화(spectral clustering)에 적용하고, 그 성능을 비교해 본다.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.04a
• /
• pp.283-291
• /
• 2000

인터넷 서비스 제공자들이 관심을 가지고 있는 것 중 하나는 인터넷 사용자들의 서비스 이용 패턴과 경향을 분석하는 것이다. 이를 통해 매출 증대와 실제 경영에 도움이 되는 사용자의 특성을 이해할 수 있기 때문이다. 이와 관련된 기본적인 접근방법은 사용자가 웹 서버에 접근했을 때 서버에 남는 웹 로그를 분석하여 사용자 패턴을 분석하는 것이다. 웹 로그 분석에 전형저인 통계기법이 사용되고 있다. 그러나 단순 통계 기법만으로는 알려지지 않는 데이터들 사이에 숨겨진 유용한 정보를 찾는 데에는 한계가 있다. 최근에는 이러한 한계를 극복하기 위해 데이터 마이닝 기술을 이용한 새로운 접근 방법이 시도되고 있다. 그러나 실제로 웹 로그에서부터 데이터 마이닝 기술을 이용하는 데에는 전처리 과정의 어려움과 실제 유용한 패턴을 어떻게 정의하는 가가 어려운 문제이다. 본 연구에서는 로(raw) 데이터인 웹 로그에서 유용한 패턴을 찾기 위한 전처리 과정을 알아보고, 웹 마이닝 시스템에 적합한 트랜잭션의 데이터 구조를 제시한다. 그리고 정의된 데이터 구조를 통한 패턴 발견 과정인 웹 사이트의 개념계층을 이용한 통계 기법과 연관규칙(Association Rules) 탐사에 대해 알아본다. 마지막으로 정의된 데이터 구조를 통한 새로운 유용한 패턴을 정의한ㄷ.

• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.557-568
• /
• 2008

An ontology as the core element of Semantic Web is a formal specification of a conceptualization of shared domain knowledge. The use of well-defined ontologies can increase the quality of interoperable information systems in the area of Semantic Web. However, in practice, it is not easy to develop high-quality ontologies which have no errors. Therefore, with methodologies for ontology design, various methods or tools for ontology analysis supporting for error-detection might be very helpful for ontology developers. In this paper, we propose a novel approach for analyzing the core constructs of ontology based on the Formal Concept Analysis and develop a tool that supports error-checking ontologies. Our approach can serve not only as a guidance to modify the existing ontologies, but also as a valuable tool in developing high-quality ontologies.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.243-248
• /
• 2019

Multi-Task Learning(MTL) is a training method that trains a single neural network with multiple tasks influences each other. In this paper, we compare performance of MTL Named entity recognition(NER) model trained with Korean traditional culture corpus and other NER model. In training process, each Bi-LSTM layer of Part of speech tagging(POS-tagging) and NER are propagated from a Bi-LSTM layer to obtain the joint loss. As a result, the MTL based Bi-LSTM model shows 1.1%~4.6% performance improvement compared to single Bi-LSTM models.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.289-305
• /
• 2021

Purpose: The purpose of this study is to check the importance of higher level, sub higher level and lower alternative factor and the factor for relieved life and also check the comprehensive priority in executed "Safety and relieved life level improvement of apartment house residents by AHP analysis". Method: The safety management evaluation elements and alternatives have been arranged as hierarchical structure based on the preceding studies and the advice of experts for the maintenance and system of apartment house in this study. Study model is used for the survey of pair wise comparison composition targeting experts and AHP analysis method is used for alternative plan ranking, etc. Result: The response result of survey secured the consistency and it is confirmed that safety inspection for apartment house electricity facility is most important for higher level, safety inspection, detailed inspection and diagnosis evaluation are most important for sub higher level and plumbing equipments is most important for alternatives based on the analysis result of relative weight comparison for sub higher level and alternatives for final goal attainment of the study. Conclusion: Plumbing equipments, crime prevention safety and electrical safety are shown as top priority alternatives when observe it with expert manager's point of view for apartment house. It shows that securing the importance of living safety accident and deciding the level of relieved life can be improved are the alternatives of pre-prevention and management strengthening.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.4
• /
• pp.179-192
• /
• 2004

In this paper, we present that the result of document clustering can change dramatically with respect to the different ways of indexing compound nouns. First of all, the automatic indexing engine specialized for Korean words analysis, which also serves as the backbone engine for automatic document clustering system, is introduced. Then, the details of hierarchical agglomerative clustering(HAC) method, one of the widely used clustering methodologies in these days, was illustrated. As the result of observing the experiments, carried out in the final part of this paper, it comes to the conclusion that the various modes of indexing compound nouns have an effect on the outcome of HAC.