• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.82-87
• /
• 1998

여러 음원들에 의해 형성된 파동장내에서 각 신호음의 주파수 특성과 시간 지연 (time delay)을 추정할 수 있는 알고리즘을 개발하였다. 이 알고리즘의 관련 수식은 두 개의 상호 간섭하는 신호가 입사하고 여기에 주변 환경에 의한 랜덤 잡음이 첨가된다고 가정하여 유도되었으며 두 개 이상의 신호음이 있는 상황에 대해 확장이 가능하다. 본 논문에서 시간 지연이 일정한 수신 신호 영역에 등간격으로 놓여진 수신기로부터 각 센서에 수신된 신호의 스펙트럼은 M개의 센서에 대해 K개의 음원 스펙트럼과 K개의 조정 벡터(steering vector) 의 선형 조합(linear combination)으로 주파수에서 모델된다. 각 음원의 주파수 특성과 음원 으로 들어오는 신호의 입사각을 결정하기 위하여 본 알고리즘은 전달 행렬(transfer matrix) 을 계산하고 그 전달 행렬의 고유값(eigenvalue)과 고유벡터(eigenvector)를 분석한다. 이 고 유값들은 복소수이며 그 크기는 진폭 변환 계수를 결정한다. 위상은 수신기의 간격으로부터 시간 지연을 결정하는 기울기를 갖는 주파수의 선형 함수이다. 전달 행렬에의 입력 자료들 은 동일 간격 소자간의 cross-power spectra이다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.165-173
• /
• 2010

In this paper, the dynamic stiffness of scaled boundary finite element method(SBFEM) was analytically derived to represent the non-homogeneous space. The non-homogeneous parameters were introduced as an expotential value of power function which denoted the non-homogeneous properties of analysis domain. The dynamic stiffness of analysis domain was asymptotically expanded in frequency domain, and the coefficients of polynomial series were determined to satify the radiational condition. To verify the derived dynamic stiffness of domain, the numerical analysis of the typical problems which have the analytical solution were performed as various non-homogeneous parameters. As results, the derived dynamic stiffness adequatlly represent the features of the non-homogeneous space.

• The KIPS Transactions:PartB
• /
• v.13B no.3 s.106
• /
• pp.329-336
• /
• 2006

In this paper, we propose a method of significant term extraction within a document. The technique used is Principal Component Analysis(PCA) which is one of the multivariate analysis methods. PCA can sufficiently use term-term relationships within a document by term-term correlations. We use a correlation matrix instead of a covariance matrix between terms for performing PCA. We also try to find out thresholds of both the number of components to be selected and correlation coefficients between selected components and terms. The experimental results on 283 Korean newspaper articles show that the condition of the first six components with correlation coefficients of |0.4| is the best for extracting sentence based on the significant selected terms.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.12
• /
• pp.1079-1088
• /
• 2015

Parallelism and performance enhancement of calculating view factors in KSDS developed by KARI is introduced in this paper. View factor is an essential parameters of radiation thermal analysis for a spacecraft, and the amount of computation of them is not negligible. Especially, independent integration of view factors at each position of the orbit because the relative displace between solar panel and main body of a satellite varies with the position on the orbit. This paper introduces a range of parallelism of computing view factor and their performance, detection of obstructions by spatial search algorithm based on KD-Tree, and the reduction of the calculation of view factors of a satellite with relative motion between solar panel and main body, called updating fractional view factor matrix, for satellite thermal analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.4
• /
• pp.54-76
• /
• 1988

In Part Ⅰ of the paper, we have developed various block least mean-square (BLMS) adaptive digital filters (ADF's) based on a unified matrix treatment. In Part Ⅱ we analyze the convergence behaviors of the self-orthogonalizing frequency-domain BLMS (FBLMS) ADF and the unconstrained FBLMS (UFBLMS) ADF both for the overlap-save and overlap-add sectioning methods. We first show that, unlike the FBLMS ADF with a constant convergence factor, the convergence behavior of the self-orthogonalizing FBLMS ADF is governed by the same autocorrelation matrix as that of the UFBLMS ADF. We then show that the optimum solution of the UFBLMS ADF is the same as that of the constrained FBLMS ADF when the filter length is sufficiently long. The mean of the weight vector of the UFBLMS ADF is also shown to converge to the optimum Wiener weight vector under a proper condition. However, the steady-state mean-squared error(MSE) of the UFBLMS ADF turns out to be slightly worse than that of the constrained algorithm if the same convergence constant is used in both cases. On the other hand, when the filter length is not sufficiently long, while the constrained FBLMS ADF yields poor performance, the performance of the UFBLMS ADF can be improved to some extent by utilizing its extended filter-length capability. As for the self-orthogonalizing FBLMS ADF, we study how we can approximate the autocorrelation matrix by a diagonal matrix in the frequency domain. We also analyze the steady-state MSE's of the self-orthogonalizing FBLMS ADF's with and without the constant. Finally, we present various simulation results to verify our analytical results.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.3
• /
• pp.143-154
• /
• 2014

An improved method for evaluating effective buckling length of semi-rigid frame with inelastic behavior is newly proposed. Also, generalized exact tangential stiffness matrix with rotationally semi-rigid connections is adopted in previous studies. Therefore, the system buckling load of structure with inelastic behaviors can be exactly obtained by only one element per one straight member for inelastic problems. And the linearized elastic stiffness matrix and the geometric stiffness matrix of semi-rigid frame are utilized by taking into account 4th terms of taylor series from the exact tangent stiffness matrix. On the other hands, two inelastic analysis programs(M1, M2) are newly formulated. Where, M1 based on exact tangent stiffness matrix is programmed by iterative determinant search method and M2 is using linear algorithm with elastic and geometric matrices. Finally, in order to verify this present theory, various numerical examples are introduced and the effective buckling length of semi-rigid frames with inelastic materials are investigated.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.1
• /
• pp.24-30
• /
• 1998

본 논문에서는 기존의 단방향 컬러 스페이스 컨버터(Color Space Converter)를 양방 향으로 변환하는 것뿐만 아니라, 기존의 디코더, 엔코터 및 모니터 등이 가지고 있는 Brightness 기능을 갖도록 변환 행렬 계수를 임의로 조정할 수 있는 컬러 스페이스 컨버터 를 설계하였다. 이러한 변환 계수 자체를 조정하여 휘도 및 색차 신호에 변화를 주는 방법 은 새롭게 제안한 방법으로 계수의 조정은 ROM형태를 이용하여 향후 인터페이스 부분을 부가하여 소프트웨어적으로 제어할 수 있도록 설계하였다. 본 논문에서 제안한 Brightness 기능을 갖는 컬러 스페이스 컨버터는 저가의 멀티미디어 비디오 관련 시스템을 구현할 수 있는 장점을 가지고 있다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.191-196
• /
• 2004

This study proposed the analysis of mass position detection and modified stiffness due to the change of the mass and stiffness of structure by using the original and modified dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom by modifying the mass. The predicted detection of mass positions and magnitudes are in good agrement with these from the structural reanalysis using the modified mass.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.32-35
• /
• 2003

공간-시간 블록 부호(STBC)는 다중안테나 시스템에서 기존 기술에 비해서 부가적인 대역폭 필요 없이 부호화 이득을 얻을 수 있다. STBC의 우수한 디자인 조건은 다이버시티 이득 관점에서는 신호 행렬들의 차가 완전 계수(Full-Rank)를 가져야 하고 코딩 이득의 관점에서는 신호 행렬들의 차의 determinant 값이 최소값을 가져야 한다. 본 논문에서는 STBC가 Full Rank 와 non-Full Rank 때 성능에 관하여 실험하였다. 시스템모델에 관하여 간략한 설명과 이 실험결과에 관하여 논의하였다. 본 논문의 실험 결과는 전송안테나와 수신안테나가 각각 4개씩, BPSK, QPSK, 8PSK 변조(modulation)을 사용하여 실험결과를 얻었다.

• Journal of the Korean Society of Radiology
• /
• v.6 no.3
• /
• pp.167-171
• /
• 2012

In this paper, we present an algorithm to extract features about disease region in digital stomach images. For feature extraction, DCT coefficients of gastrointestinal imaging matrix was obtained. DCT coefficent matrix is concentrated energy in low frequency region, we were extracted 128 feature parameters in low frequency region. Extracted feature parameters can using for differential compression of PACS and, can using for input parameter in CAD.