• Explosives and Blasting
• /
• v.9 no.1
• /
• pp.3-13
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.6
• /
• pp.486-491
• /
• 2004

Purpose: factor analysis and independent component analysis (ICA) has been used for handling dynamic image sequences. Theoretical advantages of a newly suggested ICA method, ensemble ICA, leaded us to consider applying this method to the analysis of dynamic myocardial $H_2^{15}O$ PET data. In this study, we quantified patients' blood flow using the ensemble ICA method. Materials and Methods: Twenty subjects underwent $H_2^{15}O$ PET scans using ECAT EXACT 47 scanner and myocardial perfusion SPECT using Vertex scanner. After transmission scanning, dynamic emission scans were initiated simultaneously with the injection of $555{\sim}740$ MBq $H_2^{15}O$. Hidden independent components can be extracted from the observed mixed data (PET image) by means of ICA algorithms. Ensemble learning is a variational Bayesian method that provides an analytical approximation to the parameter posterior using a tractable distribution. Variational approximation forms a lower bound on the ensemble likelihood and the maximization of the lower bound is achieved through minimizing the Kullback-Leibler divergence between the true posterior and the variational posterior. In this study, posterior pdf was approximated by a rectified Gaussian distribution to incorporate non-negativity constraint, which is suitable to dynamic images in nuclear medicine. Blood flow was measured in 9 regions - apex, four areas in mid wall, and four areas in base wall. Myocardial perfusion SPECT score and angiography results were compared with the regional blood flow. Results: Major cardiac components were separated successfully by the ensemble ICA method and blood flow could be estimated in 15 among 20 patients. Mean myocardial blood flow was $1.2{\pm}0.40$ ml/min/g in rest, $1.85{\pm}1.12$ ml/min/g in stress state. Blood flow values obtained by an operator in two different occasion were highly correlated (r=0.99). In myocardium component image, the image contrast between left ventricle and myocardium was 1:2.7 in average. Perfusion reserve was significantly different between the regions with and without stenosis detected by the coronary angiography (P<0.01). In 66 segment with stenosis confirmed by angiography, the segments with reversible perfusion decrease in perfusion SPECT showed lower perfusion reserve values in $H_2^{15}O$ PET. Conclusions: Myocardial blood flow could be estimated using an ICA method with ensemble learning. We suggest that the ensemble ICA incorporating non-negative constraint is a feasible method to handle dynamic image sequence obtained by the nuclear medicine techniques.

• Korean Journal of Poultry Science
• /
• v.17 no.3
• /
• pp.141-156
• /
• 1990

The experiments were conducted to investigate the possibility of improving the effectiveness of the existing method to estimate the edible meat weight in the live broiler chicken. A total of 360 birds, five male and female chicks from each line were sacrificed at Trial 1 (body weight 900-1, 000g), Trial 2 (body weight 1.200-1, 400g), Trial 3(body weight 1, 600-1, 700), and Trial 4(body weight 2, 000g) in order to measure the body weight, edible meat weight of breast, thigh and drumsticks, and various components of body weight. Each line was reared at the Poultry Breeding Farm, Seoul National University from the second of july, 1987 to the thirteenth of September, 1987. The results obtained from this study were summarized as follows ： 1. The average body weights of each line( H. T, M, A) were $2150.5\pm$34.9, $2133.0\pm$26.2, $1960.0\pm$23.1, and $2319.3\pm$27.9, respectively. at 7 weeks of age. The feed to body weight eain ratio for each line chicks was 2.55, 2.13, 2.08, and 2.03, respectively, for 0 to 7 weeks of age. The viability of each line was 99.7. 99.7, 100.0, and 100.0%, respectively, for 0 to 7 weeks of age.01 was noticed that A Line chicks grow significantly heavier than did T, H, M line chic ks from 0 to 7 weeks of age. The regression coefficients of growth curves from each line chicks were bA＝1.015, bH＝0.265, bM＝0.950 and bT＝0.242, respectively. 2. Among the body weight components, the feather. abdominal fat, breast, and thigh and drumsticks increased in their weight percentage as the birds grew older, while neck. head, giblets and inedible viscera decreased. No difference wat apparent in shank, wings and hack. 3. The weight percentages of breast in edible part for each line thicks were 19.2, 19.0, 19.9 and 19.0% at Trial 4, respectively. The weight percentages of thigh and drumsticks in edible part for each line chicks were 23.1, 23.3, 22.8, and 23.0% at Trial 4. respective1y. 4. The values for the percentage meat yield from breast were 77.2. 78.9 73.5 and 74.8% at Trial 4 in H, T, M and A Line chicks. respectively. For thigh and drumstick, the values of 80.3, 78.4. 79.7 and 80.2% were obtained. These data indicate that the percentage meat yield increase as the birds grow older. 5. The correlation coefficients between body weight and blood. head, shanks. breast. thigh-drumstick were high. The degree if correlation between abdominal fat(%) and percentage of edible meat were extremely low at all times, but those between abdominal fat (%) and inedible viscera were significantly high.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.56-68
• /
• 1981

A maize line was selected in 1979 among 1000 Korean local maize lines collected in 1977. The selected maize line was characterized by having three to four tillers and eight to 10 ears on each individual plant. The line was assumed to have a great potential as a silage crop. The investigation was conducted as one of the serial studies on the Korean maize collected lines to provide basic information on the genetic variabilities of the multi-eared and tillered (MET) line and on other agronomic characters, prior to use the line as material for future breeding works for silage crop. The MET line and Suwon #19, single cross hybrid, as check variety were planted on May 1, 15 and 30, in three different levels of plant populations. The results obtained were summarized as follows: 1. The genetic variabilities of multi-ear and tillering habits were greater than environmental variabilities. 2. Total dry leaf weight of individual plant of MET line was also significantly higher than that of Suwon #19. 3. The mean number of tillers and ears bearing on the individual plant of MET line varied greatly with plant densities. The number of tillers and ears was on the average 2.9 and 7.0, respectively, when planted in 60cm. by 60cm. 4. The total dry matter and dried stem weight of the individual plant on MET line were comparable to those of Suwon #19. 5. The kernel weight from the individual plant of MET line was 5 to 40% less than that of Suwon #19, depending upon the plant densities. 6. The Kernel to stover ratio was higher for Suwon #19 than for the MET line. (41% to 35%). 7. The MET line had shown first tiller two weeks after planted on May 1. The second and third tillers appeared three to five days after the appearance of the first tiller. 8. The MET line was very specific in tillering habits. All the tillers were borne on the first few nodes of main stem below the soil surface. 9. The tillering habits of MET line were vigorous in the early part of the growing season, but less vigorous in the later part of the growing season. The number of efficient tillers bearing useable ears, was around two to three, when planted in 60cm. by 60cm. 10. The difference of plant height between main stem and first few tillers was around 10cm. 11. The ear size of MET line was around one-third of the major corn belt hybrids. The shape of ear of MET line was conical, with different diameter. 12. The kernel of the MET line was flinty with small soft starch patches on the endosperm part. 13. The 100 kernel weight was around 15gr., which is about one half of the major high yielding hybrids. 14. The ear height of MET line was comparatively higher than that of Suwon #19. 15. Significantly high and positive phenotypic correlation coefficients were obtained among major plant characters. 16. The growth rate of MET line was slower than that of Suwon #19. 17. MET line and Suwon #19 were both heavily infected with black streaked mosaic virus.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.923-932
• /
• 2003

This study was carried out to estimate the effects of breed and environment such as sex, test station, test year, test season, parity, initial and final weight on average daily gain, age at 90kg, backfat thickness, feed efficiency, lean percent and selection index on the basis of the performance data collected from 25,790 pigs of Duroc, Yorkshire and Landrace breeds which were performance-tested at the Korea Swine Testing Station from 1991 to 2002. The results obtained in the study are summarized as follows; 1. The means of the major economic traits were estimated as 959.95${\pm}$0.699g for average daily gain, 138.36${\pm}$0.072days for age at 90kg, 1.41${\pm}$0.001cm for backfat thickness, 2.33${\pm}$0.001 for feed efficiency, 56.71${\pm}$0.018% for lean percent and 221.65${\pm}$0.113 for selection index. 2. The effect of breed was statistically significant for all studied traits. Briefly, Duroc showed the best performance for the average daily gain and age at 90kg. Landrace had the best performances for the backfat thickness and lean meat percent. In feed efficiency and selection index, Yorkshire had a better score than other breeds. 3. The least-squares means of female and male for the traits studied were 923.05${\pm}$1.289g and 974.53${\pm}$0.856g for average daily gain, 139.74${\pm}$0.145days and 137.21${\pm}$0.097days for age at 90kg, 1.49${\pm}$0.002cm and 1.39${\pm}$0.002cm for backfat thickness, 2.43${\pm}$0.002 and 2.28${\pm}$0.002 for feed efficiency, 56.43${\pm}$0.034% and 56.81${\pm}$0.023% for lean percent and 211.37${\pm}$0.194 and 224.61${\pm}$0.129 for selection index. Therefore, males were superior to females for all traits examined. 4. The effect of test station was statistically significant for all traits except for selection index. Performances for age at 90kg, backfat thickness, feed efficiency and lean meat percent collected from Test station 2 were higher than those from Test station 1. However, Test station 1 showed better average daily gain. 5. The initial weight and final weight included as a covariate in this study had a significant influence on average daily gain, age at 90kg, backfat thickness, feed efficiency and selection index. From the absolute values of the estimated regression coefficients, it was inferred that the final weight had greater effect for the investigated traits than the initial weight.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.5
• /
• pp.315-321
• /
• 2004

To compare soil carbon contents by Tyurin method and dry combustion method, we carried out analysis for 212 samples of agricultural land in Korea. The average values of soil carbon contents analyzed by Tyurin method and dry combustion method were $17.47{\pm}10.80$ and $19.91{\pm}10.63g\;kg^{-1}$, respectively. Both methods were evaluated as acceptable methods for soil carbon contents as the results showed. The results showed that soil texture had little effect on analysis method of carbon contents. Highly significant linear regression equation, Y = 0.846X ($R^2=0.991$), was obtained between carbon contents analyzed by Tyurin method (Y) and dry combustion method (X). As a result of comparison with data of carbon contents of the two methods, about 69% of results at dry combustion method have exceeded to results at Tyurin method. Especially, differences between results at two methods became higher as carbon contents were increasing. Tyurin method has been advantages such as shorter analysis time for one sample, more recognition for carbon analysis, and no need for expensive analyzer, while dry combustion method has simpler procedure, no heavy metal wastes, and more samples for analysis at one time.

• Journal of Technology Innovation
• /
• v.14 no.1
• /
• pp.31-66
• /
• 2006

The country with a relative abundance of human capital conducts relatively more R&D in the steady state than its partner. This country acquires the know-how to produce a relatively wider range of innovative goods. High technology comprises a large share of the national economy in the human-capital rich country and real output growth is faster. This prediction would seem to accord weakly with empirical observation of Korean economy.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.246-254
• /
• 2015

From 2013 to 2014, volatile organic compounds (VOCs) were analyzed to determine biogenic volatile organic compounds (BVOCs) and anthropogenic volatile organic compounds (AVOCs) at eight sites in Mt. Mudeung and one site in downtown, by using a GC/Mass-ATD (automatic thermal desorber). The concentration of terpene noted as biogenic volatile organic compounds at Pungamjeong (PA), in a forest of Chamaecyparis obtusa, was 821 pptv, which was the highest among the eight sites. This value was followed by Wonhyogyegok (WH: 785 pptv), Norritzae (NZ, coniferous forest: 679 pptv), Dongjeokgol (DJ, mixed species forest: 513 pptv), Jangbuljae (JB, Abies koreana: 476 pptv), and Seinbongsamgerri (SS, pine trees: 464 pptv). 11~15 species of terpene was detected in the forest depending on the site. At PA in May, α-pinene showed the highest value, occupied 20% of terpene followed by coumarin, sabinene, phellandrene, myrcene, borneol, eucalyptol, β-pinene, cymene, δ-limonene, γ-terpinene, camphor, camphene, and mentol in the order. The mean concentrations of AVOCs were 0.74~2.52 ppbv in the forests and 3.14 ppbv in the downtown area. From May to July, the AVOCs ratios of the downtown to each forest were 1.9~4.0. Among 10 species of AVOCs, the sum of toluene and benzene was 2.34 ppbv and occupied 75%. In June, the ratios of toluene were 44.1% at DJ site and 53.1% at JW site (downtown). The BVOCs showed a positive correlation with the AVOCs at the forest sites (r = 0.328), which was statistically insignificant (p = 0.184).

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.431-436
• /
• 2001

The extractable sulfate content and sulfate adsorption capacity in soils of four Pinus densiflora stands were measured to assess the soil acidification sensitivity to acid deposition. The soluble sulfate content in organic horizon which reflects the previous deposition of sulfur oxides was much higher for Namsan and Ulsan than Kanghwa and Hongcheon. In mineral soils, however, the extractable sulfate content was the greatest for Ulsan followed by Kanghwa, Namsan and Hongcheon due to the interactive effect of previous deposition and soil adsorption of sulfate. Adsorption rates of specifically adsorbed sulfate(proportion of insoluble sulfate to total extractable sulfate) for Namsan, Kanghwa and Ulsan affected by acid deposition were 16.6%, 56.8% and 37.4%, respectively, so that the soil in Namsan had the highest acidification sensitivity to acid deposition. For sulfate adsorption isotherm($RE=mX_i-b$), the significantly positive correlations between added sulfate($X_i$) and adsorbed sulfate(RE) were found only in mineral soil(p<0.05) over all regions. The regression coefficient(m) that means soil sulfate adsorption capacity by 0-30cm depth was 0.16, 0.24, 0.25 and 0.32 in $mmol_c\;kg^{-1}$ for Namsan, Kanghwa, Ulsan and Hongcheon, respectively, indicating that soil acidification sensitivity is the highest for Namsan. The added sulfate($X_i$) that could make the adsorbed sulfate(RE) null was 3.81, 2.17, 4.96 and 0.65 in $mmol_c\;kg^{-1}$ for Namsan, Kanghwa, Ulsan and Hongcheon, respectively and the values of former three regions considerably exceeded the realistic sulfate deposition.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.90-102
• /
• 1986

This study was performed to obtain the basic data which can be applied to the use of concretes. The data was based on the properties of concrectes depending upon water-cement ratios and addings to compare those of plain concrete. The results obtained were summarized as follows; 1. In case the proper quantity of water reducing agent was added, unit weight of water is decreased to 12.9% with WR-LG of water reducing set standarding agent and to 8.6% with HF-SP of high fluid agent and to 17.2% with AH-WR of water reducing set accelerating agent, respectively, as compared with plain concrete. With the increase of water reducing agent content unit weight of water was greatly decreased. 2. The adding rate of water reducing agent which produce maximum strength was 0.2% with WR-LG and 0.4% with HF-SP and AH-WR, respectively. The increasing rates of strengths were showed that WR-LG is 24.1% and that HF-SP is 41.8% and that AH-WR is 43.3%, respectively, as compared with plain concrete. 3. The correlations between compressive and tensile strength were highly significant as a straight line. the multiple regression equations of compressive and tensile strength were computed with the variables of curing age and addition of water reducing agent. They were highly significant. 4. In case the proper quantity of water reducing agent was added, the correlations between water-cement ratio and compressive strength were highly significant as a straight line. The increasing rates of strength were showed higher than the decreasing rates of water cement-ratio.