• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.185-190
• /
• 2011

In marine controlled-source electromagnetic (CSEM) modeling, it may be difficult to evaluate primary fields accurately using conventional linear filters because they decay very rapidly with distance. However, since there exists a closed-form solution to the Hankel transform in TM mode for a homogeneous half space, we can assess the accuracy of linear filters for evaluating the Hankel transform. As a result, only nine out of 36 source-receiver pairs show that EM fields decrease linearly in semi-log scale with an increase of source-receiver distance, while EM fields are either 0 or not reduced significantly due to an effect of the air layer. There also exist closed-form solutions for the nine pairs, and the others can be evaluated accurately with a relatively short filter. This paper proposes a method which uses closed-form solutions for TM-mode Hankel transforms and a filter with 61 coefficients for TE-mode ones.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.153-163
• /
• 2010

In this paper a frequency response analysis using Krylov subspace-based model reduction and its design sensitivity analysis with respect to design variables are presented. Since the frequency response and its design sensitivity information are necessary for a gradient-based optimization, problems of high computational cost and resource may occur in the case that frequency response of a large sized finite element model is involved in the optimization iterations. In the suggested method model order reduction of finite element models are used to calculate both frequency response and frequency response sensitivity, therefore one can maximize the speed of numerical computation for the frequency response and its design sensitivity. As numerical examples, a semi-monocoque shell and an array-type $4{\times}4$ MEMS resonator are adopted to show the accuracy and efficiency of the suggested approach in calculating the FRF and its design sensitivity. The frequency response sensitivity through the model reduction shows a great time reduction in numerical computation and a good agreement with that from the initial full finite element model.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.629-638
• /
• 2009

In this paper, the existing formulas of the step-by-step method were generalized for effective estimation of responses of complicated composite sections due to long-term deformation of concrete. The initial transformed section properties of the composite section were derived from material and section properties of concrete section and sections which confine the longterm deformation of concrete. The transformed section properties at each step were derived from the effective modulus of elasticity considered the creep coefficient variation. Improved formulas of the step-by-step method for generalized responses were derived by introducing 5 generalized parameters. The formulas can be more simplified by applying constant increment of creep coefficient at each step. The constant increment of creep coefficient at each step can also reduce computing time and make equal computing error of each step. The generalized responses for axial elastic strain of concrete section were most sensitive to the area rate of concrete section, and the ratio of the second moment of the confining section area was more sensitive than that of the concrete section. Those for elastic curvature of concrete section were most sensitive to the ratio of the second moment of concrete section area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.846-855
• /
• 2021

Eco-friendly and renewable energy sources are actively being researched in recent times, and of shore wind power generation requires advanced design technologies in terms of increasing the capacities of wind turbines and enlarging wind turbine installation vessels (WTIVs). The WTIV ensures that the hull is situated at a height that is not affected by waves. The most important part of the WTIV is the leg structure, which must respond dynamically according to the wave, current, and wind loads. In particular, the wave load is composed of irregular waves, and it is important to know the exact dynamic response. The dynamic response analysis uses a single degree of freedom (SDOF) method, which is a simplified approach, but it is limited owing to the consideration of random waves. Therefore, in industrial practice, the time-domain analysis of random waves is based on the multi degree of freedom (MDOF) method. Although the MDOF method provides high-precision results, its data convergence is sensitive and difficult to apply owing to design complexity. Therefore, a dynamic amplification factor (DAF) estimation formula is developed in this study to express the dynamic response characteristics of random waves through time-domain analysis based on different variables. It is confirmed that the calculation time can be shortened and accuracy enhanced compared to existing MDOF methods. The developed formula will be used in the initial design of WTIVs and similar structures.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.689-695
• /
• 2016

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.588-593
• /
• 2006

자연하천은 일반적으로 만곡수로나 사행수로 형태를 보이고 있으며, 직선수로에서와 달리 원심력에 기인한 이차류 영향을 받게 된다. 이차류에 의해서 수면에서는 만곡부 바깥쪽으로, 하상에서는 만곡부 안쪽으로의 흐름특성을 보이게 된다. 만곡부 안쪽으로 가해지는 하상 전단응력에 기인하여 하상에서의 입자가 만곡부 안쪽으로 이송되며, 결과적으로 만곡부 안쪽에는 점사주가, 바깥쪽에는 소(pool)가 생성된다. 또한 지형경사의 생성으로 입자에 가해지는 중력효과도 변화된다. 따라서 이와 같은 자연하천의 흐름과 하상변동을 수치모의 하기 위해서는 만곡부 이차류 특성을 고려한 모형이 필요하다. 본 연구에서는 수심 적분된 흐름방정식과 하상토 보존방정식 (Exner equation)을 이용한 하상변동을 위한 비연계 수치모형을 위해서 하상토 보존방정식의 유한요소 알고리즘을 개발하였다. 하상토 보존방정식은 흐름 특성에 따른 평형 유사량의 공간변화율을 이용하여 일정 기간 동안의 하상 변화량을 계산한다. 이 때 이차류에 의한 하상 전단응력의 편각 및 지형경사 변화에 따른 실제 입자의 이송방향을 보정하여 평형 유사량이 계산된다. 이러한 보정식을 적용시키기 위해서는 유속성분의 공간변화량 및 지형경사의 공간성분이 필요하다. 유한요소법은 연속성 변수를 이산화시켜 근사해를 구하는 수치기법의 일종이기 때문에, 요소망이 불규칙적으로 구성되었을 경우 임의의 절점에서 연속성을 지닌 변수의 공간변화율을 계산하는데 어려움이 있다. 따라서 본 연구에서는 평형 유사량 계산 시에 절점이 아닌 요소 내부에서 평형 유사량을 계산하는, 하상토 보존방정식의 새로운 유한요소 알고리즘을 개발하고, 새로운 알고리즘을 적용시킨 수치모형의 검증을 행하였다. 경계조건 알고리즘의 검증으로 위해서 Soni 등 (1980)이 행한 상류 유입 유사량에 따른 하상변동을 수치 모의하고 실험치와 비교하였으며, Sutmuller와 Glerum (1980)이 수행한 만곡수로에서의 하상변동을 모의하고 실험과 비교하였다. 새로운 알고리즘을 적용시킨 하상토 보존방정식의 유한요소 수치모형의 결과는 매우 안정적이며, 실험과 매우 유사한 결과를 얻을 수 있었다. 본 수치모델은 현재 균일한 입자의 하상토만을 고려하므로, 입자분급이나 하상 장갑화 현상 등은 무시한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.9
• /
• pp.701-706
• /
• 2018

The characteristic basis function method, or CFBM, is one of the representative electromagnetic methods widely used today. In this paper, we propose an accelerating algorithm for the far field interaction calculation of CBFM, to efficiently analyze the electromagnetic characteristics of arbitrarily large structures. To effectively analyze the electromagnetic characteristics of a large structure, it is essential to shorten the computation time. In the CBFM analysis method, the complexity can be greatly reduced by using approximations created via the multipole expansion method. The new algorithm proposed in this paper is applied to the computation of radar cross sections of conductor spheres and fighter aircraft, and it is confirmed that calculation time is reduced by 34 % and 74 %, respectively, without loss of accuracy compared with existing CBFM.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.1012-1019
• /
• 2015

This paper shows the acceleration of iterative physical optics(IPO) for radar cross section(RCS) by using two techniques effectively. For the analysis of the multiple reflection in the cavity, IPO uses the near field method, unlike shooting and bouncing rays method which uses the geometric optics(GO). However, it is still far slower than physical optics(PO) and it is needed to accelerate the speed of IPO for practical purpose. In order to address this problem, graphic processing unit(GPU) can be applied to reduce calculation time and adaptive iterative physical optics-change rate(AIPO-CR) method is also applicable effectively to optimize iteration for acceleration of calculation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1287-1292
• /
• 2010

In this paper, a hybrid technique is presented. First, the isochromatic fringe data of a given set of points are calculated by the finite element method and are used as input data in complex variable formulations. Then the numerical model of the specimen with a central inclined crack is transformed from the physical plane to the complex plane by conformal mapping. The stress field is analyzed and the mixed-mode stress intensity factors are calculated for this complex plane. The stress intensity factors are calculated by the finite element method as well as by a theoretical method and compared with each other. In order to conveniently compare these values with each other, both actual and regenerated photoelastic fringe patterns are multiplied by a factor of two and sharpened by digital image processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.1991-1998
• /
• 2015

This paper presents the antenna factor characteristics of a calculable dipole antenna with a hybrid balun, installed above ground plane vertically and horizontally, using Method of Moments (MoM). An expression for the antenna factor is formulated using the concept of power mismatch loss. The input impedance and effective length of the antenna, which are in the formula of the antenna factor, are calculated using the MoM. The results show that the antenna factors above a ground plane are agreed with the free space antenna factors within ± 0.14 dB. The horizontal antenna factors are varied more by 0.2 dB than the vertical antenna factors.