• Korean Journal of Microbiology
• /
• v.46 no.4
• /
• pp.346-351
• /
• 2010

The purpose of this work was to investigate the characteristics of a biosurfactant-producing bacterium isolated from crude-oil contaminated soils. During the incubation of strain HK-3 with 1% crude-oil, bacterial growth pattern, the amount of biosurfactant production, and pH changes were monitored. In order to examine the effect of supplemented carbons on the production of biosurfactant, cultivation of HK-3 cells in BH media with different carbons (e.g. glucose, dextrose, mannitol, citrate, or acetate) revealed that the production of biosurfactant reached the maximal level at the 72 h incubation with mannitol, which the area of clear zone was measured to approximately 7.64 $cm^2$. Identification test using the BIOLOG system, morphology study based on scanning electron microscopy and the 16S rRNA sequence-based phylogenetic analysis assigned strain HK-3 to a Pseudoalteromonas species, designated as Pseudoalteromonas sp. HK-3 which was registered in GenBank as [FJ477041].

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.102-107
• /
• 2019

Anionic surfactants were synthesized by using an sarcosine, taurine and fatty alcohol with varying the carbon chain length. The structure of synthesized surfactants was confirmed by $^1H$ NMR analysis. The critical micelle concentration of the synthetic anionic surfactant was $10^{-2}{\sim}10^{-4}mol/L$ and the surface tension value at the critical micelle concentration was between 21 and 39 mN/m. It was confirmed by the Ross-Miles method that the synthetic surfactant with the carbon chain of 12 showed a good foaming power and stability. In addition, the surfactant using the sacosine was found to have a good affinity in soybean oil while that using taurine in benzene. The physical properties of synthesized surfactants were determined by measuring the critical micelle concentration, foaming power and emulsifying stability.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.1-10
• /
• 1996

Gibbs' adsorption isotherms are studied to assay the structural effects of ethylene oxide (EO) and propylene oxide (PO) moieties on the molecular area and the interfacial tension behavior of molecules at the interface. Several industrial alcohols and isomerically pure alcohols, which have a general stucture of C4H9O(EO)m(PO)nH, are examined for their cosurfactant properties. They are high molecular weight alcohols and more surface active than the cosurfactants usually used. Results show that the number and the sequence of EO and PO units significantly affect the molecular areas and the interfacial tension (IFT) behavior of these molecules at the water/oil interface. The following conclusions are drawn from the result: 1) PO is more efficient in lowering the IFT and less effective in adsorption than EO. 2) For molecules having the same molecular weight but different structures, smaller molecules are more efficient in lowering the IFT. 3) When more EO, PO, or both units are added to the same hydrophobe, the molecule become bigger and more efficient in lowering the IFT.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.1003-1009
• /
• 2021

A study on the associative properties of sodium hyaluronate (NaHA) and Alkane-bis (dimethylalkylammonium bromide) surfactants in aqueous solution was investigated in relation to the chemical structure of surfactants. As a result of measuring the interfacial tension, a parabolic graph showing the minimum value (c_min) at a specific concentration was shown. Above this minimum concentration the increase in interfacial tension is thought to be related to the formation of aggregates of NaHA chains and dimeric surfactants. The plot of viscosity vs surfactant concentration shows a slight maxium at c_min and a viscosity decrease at high surfactant concentrations. Viscosity nonlinear behavior is related to the size increase due to the complex growth and to the size shrinkage following from the interaction with electrolyte ions and free micelles. The results of surface tension measurements show a broad region of surface tension decrease, indicating the NaHA-surfactant interaction. The increase in surface tension above c_min may be related to the adsorption of clusters, consisting of free NaHA chains and dimeric surfactant. The strong adsorption of surfactant is observed at high concentrations.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.51-57
• /
• 2016

In this study, we synthesized reactive surfactant which have functional radical group for effective chemical reaction. Reactive surfactant have been synthesized using synthesis of polyoxyethylene lauryl ether(POE 23) which is nonionic surfactant and methacrylic acid, acrylic acid. benzene was used as the solvent, p-TsOH was used as the catalyst. synthesized surfactant was confirmed by FT-IR, $^1H$-NMR spectra, and elemental analysis. Evaluation of physical properties was measured HLB, cloud point, surface tension, the critical micelle concentration, emulsifying power. HLB number was evaluated 11.62 to 12.09 range. The Critical Micelle Concentration(cmc) values evaluated was $1{\times}10^{-4}{\sim}5{\times}10^{-4}mol/L$ by surface tension method. The cloud point was $35^{\circ}C$, $39^{\circ}C$ each. The emulsifymvcqa ing properties of the synthesized surfactants was lower than polyoxyethylene lauryl ether. In addition, soybean oil was better than benzene. The experimental results confirmed the ester bond, the yield of 93.27%, 94.49% was found.

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.17-24
• /
• 1999

The effects of hydrophobic chain length and its structure of nonionic surfactants on surfactant adsorption and contaminated diesel removal were studied in kaolin soil. Hydrocarbon chain length and double bond in hydrophobic tail group of nonionic surfactants affected surfactant adsorption and diesel removal efficiency from kaolin soil. The degrees of surfactant adsorption and diesel removal were closely related each other. Among nonionic surfactants we studied, surfactants with shorter hydrophobic chain length and higher HLB value showed lower degree of adsorption and higher efficiency of diesel removal. The existence of unsaturated carbons in the structure of hydrophobic chain enhanced diesel removal by reducing surfactant adsorption to kaolin soil. The best diesel removal was obtained after adsorption saturation was reached. If surfactant concentration was higher than a critical value, diesel removal was reduced probably because of precipitation. liquid crystal formation, or coacervation of surfactants at high concentration.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.2
• /
• pp.103-108
• /
• 1997

A series of batch tests were conducted to evaluate the design parameters for the application of soil washing techniques to the hydrophobic organic compounds (HOCs)-contaminated soil using mixed surfactants. Because the mixed surfactants form different structures of molecular aggregates from single surfactant, they were applied to improve the washing efficiency. Kinds of surfactants added, mixing ratio, and total concentration of mixed surfactants were evaluated. The uncontaminated soil was obtained from a country hill near Nock-Chun Station in Seoul. The portion of soil passing #4 (4.75 mm) sieve was used. The pH, organic contents and cation exchange capacity were 4.4, 1.6% and 4.08 meq/100 g, respectively The soil was artificially contaminated by n-dodecane. The 5% solution of OA-5 and OA-14 (1:1) showed 86% washing efficency. The 4% solution of SDS and OA-5 (1:1) showed 95% washing efficiency.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2B
• /
• pp.207-212
• /
• 2009

Surfactants were used as representative anionic and non ionic surfactants to investigate the effect of mass transfer on the mineral-catalyzed Fenton-like oxidation of sorbed phenanthrene. Mass transfer of phenanthrene on the oxide surface or interlayer between aqueous and solid phases was generated by surfactant addition. Apparent solubility of phenanthrene was increased as surfactant concentration increasesd. In tests using Tween 80, oxidation of phenanthrene decreased as apparent solubility increased. High apparent solubility was not responsible for oxidation of sorbed phenanthrene in the sand due to the surfactant acted as a scavenger of degradation. In tests with SDS, $H_{2}O_{2}$ decomposition rate in Fenton-like oxidation was decreased by complexation between goethite and SDS. However, in tests using 32 mM of SDS, efficiency of phenanthrene treatment increased compared to the test without SDS addition. Therefore, suitable amount of SDS addition could provide optimum condition for phenanthrene oxidation on the oxide surface or interlayer between aqueous and solid phase, and decrease $H_{2}O_{2}$ decomposition, and as a result, phenanthrene removal efficiency can be improved.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.574-580
• /
• 2021

The main goal of this study was to find an optimal surfactant mixture composition for the development of the best performing cleansing products. Three different surfactants including sodium cocoyl alaninate (SCoA), cocamidopropyl betaine (CPB), and decyl glucoside (DG) were selected, which showed excellent properties in detergency, foaming height, and contamination rate through preliminary experiments. The experiments by simplex centroid design matrix for surfactant mixtures were performed, and the regression analysis was conducted with the experimental data. Surface response model equations, which is statistically significant (p < 0.05), were obtained. The optimal composition of the surfactant mixture was also determined as SCoA (0.22), CPB (0.78), and DG(0.00) from simultaneous optimization of three response variables.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.1
• /
• pp.53-61
• /
• 2011

This study was conducted to confirm the adsorption capacity of CFW(Carbonized Foods Waste), which is produced by the process of recycling waste, in PRB method that Electrokinetic(E/K) method was applied. The batch test was carried out to analyze the adsorption characteristics of CFW for adsorbing the organic compounds. The organic compounds used in the batch test were Phenanthrene and Trichloroethylene(TCE), and the anionic surfactant(SDS) and the nonionic surfactant(Brij$^{(R)}$30) were used for the surfactants. The results of the batch test confirmed that the adsorption efficiency of Phenanthrene was 99% and TCE was 26%. The each compounds compared with the adsorption isotherms, which is calculated by the Langmuir and Freundlich models. The results indicated that Phenanthrene is fitted to the linear Langmuir model, whereas the distribution of TCE is unclear. The results of the batch test used in surfactants confirmed that the adsorption efficiency of CFW using Phenanthrene was reduced to 6~8%. However, the adsorption efficiency of CFW in TCE was increased up to 81% by surfactants. Especially, the nonionic surfactant was excellent in the adsorption of CFW using TCE. Nevertheless, the adsorption efficiency of CFW in Phenanthrene was still higher than TCE. Therefore, the adsorption efficiency of CFW in Phenanthrene was better than in TCE. In PRB method using E/K method, the adsorption of CFW used nonionic surfactant is better to use than the anion surfactants on the organic compounds.