• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.295-295
• /
• 2012

본 연구에서는 아크방전을 이용한 질화 티타늄의 합성 과정 중에서, 시편 청정 공정변수를 변화시킴에 따라 계면에서의 미세조직 변화와 코팅층의 물성을 평가하였다. 아크 소스에 장착된 타겟은 $120mm{\Phi}$, 99.5 %의 티타늄 타겟을 사용 하였고, 시편과 타겟 간의 거리는 약 30 cm이며, 시편은 SUS를 사용하였다. 시편을 진공용기에 장착하고 진공배기를 실시한 후 Ar 가스 분위기에서 시편에 전압을 인가한 후 아크를 발생시켜 약 5분간 시편 청정을 실시하였다. 이 시편 청정 과정에서 시편 인가전압을 0~1,000 V로 변화시켰고 시편 정청이 끝나면 시편에 인가된 전압을 차단하고 코팅하였다. 질화 티타늄의 두께는 약 $3{\mu}m$로 동일하게 코팅하였다. 시편 인가전압 변화에 따라 시편청정 공정 시 계면에서 티타늄층이 코팅되거나 모재 내부까지 침투하는 현상을 관찰하였다. 시편청정 공정변수 변화에 따른 질화 티타늄의 코팅을 통해 계면의 미세조직과 성분의 변화를 주사전자현미경, 투과전자현미경 이미지와 에너지 분산분광기 (Energy Dispersive Spectroscopy ; EDS)를 통해 확인하였으며 나노인덴터를 이용해 경도, 탄성계수 등의 물성변화를 측정하였다. 본 연구에서 얻어진 결과를 이용하여 시편 청정 공정 제어를 통한 다양한 물성변화가 가능 할 것으로 예상된다.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.579-586
• /
• 2018

In this study, surfactants were synthesized using fatty alcohols of 8, 10, 12 and 14 carbon chains length. The structures of the synthesized surfactants was confirmed by FT-IR and $^1H$-NMR analysis. The surface tension of the diluted surfactant was measured as 26~32 mN/m depending on the carbon length and the critical micelle concentration was measured as $10^{-3}{\sim}10^{-5}mol/L$.The minimum value per molecule of the synthesized sulfonic acid surfactant is 1.68 to $1.30nm^2$. The physical properties of the synthesized surfactants were determined by measuring the critical micelle concentration, foaming power, emulsifying stability, and contact angle.

• Journal of Adhesion and Interface
• /
• v.8 no.3
• /
• pp.9-15
• /
• 2007

The interfacial evaluation of surface modified Jute fiber/polypropylene (PP) composites before and after hydration was investigated using micromechanical test and dynamic contact angle measurement. The IFSS of alkaline and silane-treated Jute fiber/PP composites increased, whereas after hydration, the IFSS of the untreated, alkaline- and silane-treated Jute fibers/PP composites decreased due to swelled fibrils by water infiltration. The interfacial adhesion of silane treated fiber/PP composites was higher than alkaline-treated or the untreated cases. The surface energies of Jute fiber treated under various conditions were obtained using dynamic contact angle measurement. Especially after hydration, the thermodynamic work of adhesion was calculated by considering water interlayer, which indicated the stability of IFSS between silane treated Jute fiber and PP matrix showing better than others.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.102-107
• /
• 2019

Anionic surfactants were synthesized by using an sarcosine, taurine and fatty alcohol with varying the carbon chain length. The structure of synthesized surfactants was confirmed by $^1H$ NMR analysis. The critical micelle concentration of the synthetic anionic surfactant was $10^{-2}{\sim}10^{-4}mol/L$ and the surface tension value at the critical micelle concentration was between 21 and 39 mN/m. It was confirmed by the Ross-Miles method that the synthetic surfactant with the carbon chain of 12 showed a good foaming power and stability. In addition, the surfactant using the sacosine was found to have a good affinity in soybean oil while that using taurine in benzene. The physical properties of synthesized surfactants were determined by measuring the critical micelle concentration, foaming power and emulsifying stability.

• Journal of Adhesion and Interface
• /
• v.10 no.4
• /
• pp.169-173
• /
• 2009

In this study, We were studied on the properties of polyurethane elastomer containing the polyol, chain extender and isocyanate in polyurethane elastomer. Polyurethane elastomer had the best properties with poly(tetramethylene) glycol for in-line skate wheel. With more incorporation of chain extender content in polyurethane elastomer, tensile strength and hardness increased and elongation decreased. And then properties of polyurethane elastomer with the bulky type isocyanate had better than the flexible type isocyanate.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.448-451
• /
• 2001

각각 소수성과 친수성을 나타내는 올레핀계 고분자인 PE 와 granule starch의 blend는 서로 다른 특성에 기인하여 거시적인 상분리 현상이 발현되며 두 물질간에 계면을 형성한다. 이와 같이 낮은 interfacial adhesion을 갖는 내부 구조는 외력에 대한 저항력이 급격히 저하되어 낮은 물성 특성을 나타낸다. (중략)

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.454-459
• /
• 2017

In this study, aqueous acrylic emulsion adhesives were prepared using various surfactants and their properties were also investigated. Solids content, conversion, particle size distribution and initial adhesion properties of the prepared adhesives were compared with each other. The solid content of the adhesives was evaluated 60% and the conversion rate of the emulsion polymerization was 97% at 2 wt% concentration of synthesized surfactants. The particle size distribution analysis revealed that the size distribution of adhesive particles was 290~470 nm when the synthesized cationic surfactant was added. The initial adhesion and adhesion time were also improved. The maximum adhesive strength was found to be 2.55 kgf when using a single surfactant (POE 23), and superior to that of using other surfactants. It was confirmed that the corrosion inhibition of the adhesive prepared by adding the cationic gemini surfactant was maintained for 48 hours.

• Composites Research
• /
• v.33 no.6
• /
• pp.415-420
• /
• 2020

The interfacial properties in carbon fiber composites, which control the overall mechanical properties of the composites, are very important. Effective interface enhancement work is conducted on the modification of the carbon fiber surface with carbon nanotubes (CNTs). Nonetheless, most surface modifications methods do have their own drawbacks such as high temperatures with a range of 600~1000℃, which should be implemented for CNT growth on carbon fibers that can cause carbon fiber damages affecting deterioration of composites properties. This study includes the use of in-situ interfacial polymerization of polyamide 610/CNT to fabricate the carbon fiber composites. The process is very fast and continuous and can disperse CNTs with random orientation in the interface resulting in enhanced interfacial properties. Scanning electron microscopy was conducted to investigate the CNT dispersion and composites morphology, and the thermal stability of the composites was analyzed via thermogravimetric analysis. In addition, fiber pull-out tests were used to assess interfacial strength between fiber and matrix.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.17-20
• /
• 1998

1. 서론 : 계면중합은 제조에 따른 박막의 성능 조절이 가능한 이유로 해서 역삼투용 복합막의 주요 제조 방법으로 제시되어 왔다. 계면중합을 응용하여 제조된 복합막의 성능은 반응 단량체의 종류, 용재의 종류, 단량체의 농도, 반응시간, 열처리 유무 및 온도와 시간 등에 의해 변한다. 한편 위의 변수에 절대적인 영향을 받고 아울러 단량체간의 몰 비가 성립하지 않음으로 해서 최적의 막 성능으로 제시되는 조건을 만족하기 위하여 주로 시행착오에 의한 방법을 동원하여 여러 변수에 다른 제조 막의 성능 고찰을 실시하여 왔다. (생략)

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.15-20
• /
• 2007