• Proceedings of the KWS Conference
• /
• 2002.05a
• /
• pp.9-16
• /
• 2002

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.57-67
• /
• 2013

The incompletion of TIR (Total Internal Reflection) in FTIR (Frustrated Total Internal Reflection) touch screen has been investigated as follows. Assuming a 3 layer thin film of medium1 ($n_1$)-medium2 ($n_2$)-medium3 ($n_3$) with refraction indices of $n_1=n_3{\neq}n_2$, it was theoretically proven that FTIR or OT (ordinary transmission) phenomena might happen through medium2 from medium1 to medium3 relying on relative difference in $n_1(=n_3)$ and $n_2$, and that the formulae for FTIR and OT could be transformed into each other depending on the number state (imaginary or real) of the light wave phase. In parallel to the theoretical analysis, the incompletion of TIR in acrylate due to external contacts was also elucidated from the experimental and phenomenological viewpoints. On the basis of this considerate work, we explained how to improve the touching performance for better FTIR touch screen.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.1
• /
• pp.19-37
• /
• 1995

A fine oil -in-water (O/W) emulsion using non-aqueous emulsification technique was developed. And the behaviors of POE(25)octyldodecyl ether in non-aqueous polyol/oil systems were studied by observing the surface tension, interfacial tension, turbidity and transition temperature. It was found that POE(25)octyldodecy1 ether hardly existed as the micelle in the non-aqueous polyol system while, in water, it formed micelles very easily. So, when a polyol, like glycerine in which POE(25)octyldodecyl ether has a poor solubility, was added, POE(25)octyldodecyl ether moved to the surface. After saturated at surface, POE(25)octyldodecyl ether began to precitate. The mean particle size of the final emulsion was 230nm. Also, the emulsion system was stable at 0$^{\circ}C$, 25$^{\circ}C$, 40$^{\circ}C$, 50 $^{\circ}C$ and freeze-thaw cycle chamber for a month, while a conventional emulsion system was unstable. It is concluded that, by pertinent combination of polyols, we can improve the adsorption efficiency of surfactant.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.3-9
• /
• 2002

In this study, electrokinetic remediation tests were performed with spiked fine-grained soil by phenanthrene which is representative hydrophobic organic contaminant of petroleum hydrocarbon. And also, the enhanced method was used with surfactant concentration variation and elapsed time to achieve more higher removal efficiency than conventional electrokinetic treatment. In conventional electrokinetic treatment, most phenanthrene was not transported. But, in the enhanced method used by the surfactant, phenanthrene moved form anode to cathode region and accumulated in cathode region. Also, the transportation rate of phenanthrene was increased with surfactant concentration increasement and elapsed time.

• The Korean Journal of Rheology
• /
• v.9 no.1
• /
• pp.1-5
• /
• 1997

새로이 합성한 계면확성제와 대표적 분산용 계면활성제의 분산효과를 상호 비교해 보기 위하여 고농도 석탄-물 슬러리계에 대한 유변학ㅈ거 성질을 측정하였다. 0~$25^{\circ}C$ 온도 범위에서 얻어진 유동곡선으로부터 여러 가지 유동 파라미터를 구한 결과, PS가 상대적으로 structure factor, C2와 shear modulus, $\chi$2/$\alpha$2 값에 있어서 큰 감소를 보여 주엇으며 특히 shear modulus는 계면활성제의 종류에 따라 큰차이를 보여주었다. 이러한 현상을 PS가 다 가음이곤 고분자 전해질과 유사한 구조를 갖고있어서 석탄 입자에 흡착시 입자간 정전기적 반발과 입체장애를 초래하여 슬러리의 유동성을 향상시킨데 따른 결과로 해석된다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.48-54
• /
• 1996

가압경수로의 부분충수 운전중 RHR 계통의 기능상실시 사고완화를 위해 가압기 manway와 증기 발생기 출구공동 manway를 동시에 개방한 경우에 대한 실험결과를 CATHAHR2 코드를 이용하여 해석하였다. 해석을 통해 이 경우에 발생하는 물리적 현상을 이해하고 이와 같은 과도기에 대해 코드 예측능력을 평가하므로 써, 실제 원전에서 사고시 적절한 사고대응 방안을 강구하는데 참고가 될 수 있도록 해석적 근거를 제시하고자 한다. 연구결과 CATHARE2 코드는 실험을 통해 관측된 주요 물리적 현상들을 타당하게 예측하였으나, 가압기와 밀림관의 DP를 과대 예측하여 원자로 상부공동의 최대압력을 실험보다 약 7kPa 높게 예측하였다. 노심 노출시간도 노심에서 기포율 분포를 비현실적으로 예측하여 실험보다 약 500초 지연되었다. 실험과 코드의 모의결과를 통하여 노심 노출은 중력주입에 의한 냉각수 보충만으로 충분히 회복될 수 있음을 확인하였다. CATHARE2 코드는 비록 상세한 현상들에 대해 다소 불확실성을 내포하였으나, 전반적인 거동분석에는 타당한 것으로 판단된다. CATHARE 코드는 노심에서 계면 마찰력을 줄임으로써 노심의 차압을 개선할 수 있었고, guide 튜브의 위치를 고온관 중심선과 일치시켜 guide 튜브내 액체의 hold-up 기간을 개선할 수 있었으며, 가압기의 계면 마찰력을 증가시켜서 밀림관에서 "plug and clearing" 현상을 모의할 수 있었다.모의할 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.38 no.7
• /
• pp.480-484
• /
• 1994

The durability of UV radiation cured coatings near the film-substrate interface has been studied. Particularly, the influence of the reactive diluent and oligomer in the UV-cured urethane acrylate formulation on the wrinkle formation of coating films was investigated. Results showed that wrinkle resistance increases when DMTA loss peaks of coating network are broad and has shoulder. When modified aromatic urethane acrylate oligomer is used to replace the aliphatic one, resulting cured network provides coating film of high hardness and flexibility. Therefore, the high values of loss modulus as low temperature are considered to be the main reason for wrinkle resistance improvements. The SEM and instron data support above conclusion.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.79-87
• /
• 2021

In this study, we developed a method to predict/analyze the performance of a dual thrust rocket motor that has 2 kinds propellant charged in axial direction. When transitioning from the booster to the suspender stage, a transient phenomenon related to performance occurred at the interface. The causes and characteristics of the transient phenomenon were investigated by comparing them with the results of the combustion test. It was confirmed that the performance transient phenomenon is sensitively generated not only by the shape design between the propellants with different properties of the propellant, but also by errors in manufacturing due to the propellant curing shrinkage.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.16-22
• /
• 1997

When platinum wan impregnated on carbon by methanol, surfactant have an important effect on the stability of platinum colloid. As the increase of amounts of surfactant enhanced the stability of platinum colloid, the particle size of platinum on carbon was diminished. But, after heat treatment, residue of surfactant remained in electrode to decrease current density of oxygen reduction. To remove surfactant, as temperature of heat treatment enhanced, platinum particle was aggromerated and current density was decreased.

• Composites Research
• /
• v.12 no.6
• /
• pp.15-21
• /
• 1999

Carbon fibers were coated with carboxy modified poly(hydroxy ether)(C-PHE, water dispersed), water soluble polymers poly(hydroxy ether ethanol amine)(PHEA) or water insoluble poly(hydroxy ether)(PHE). Interfacial shear strength of polymer coated carbon fibers was measured by micro-droplet tests with vinyl ester resin, and approximately 30 samples were tested. The interfacial adhesion of poly-mers to carbon fibers was also evaluated, and diffusion behavior of polymer films in vinyl ester resin was investigated. The carbon fibers after testing and diffusion samples were analysed by SEM in order to understand adhesion mechanism. Interfacial shear strength of carbon fibers was enhanced by the coating of PHE and C-PHE which have good or marginal solubility in vinyl ester resin, respectively, but not by the coating of PHEA possibly due to the poor solubility in vinyl ester resin.