• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.44-54
• /
• 2003

A kinetic model for evaluating effects of surfactant on the biodegradation of HOC(hazardous organic chemicals) in soil-slurry systems was developed. The model includes the partition of HOC and surfactant, the dissolved-, micellar-, and sorbed-phase biodegradation, the enhanced solubilization of HOC by surfactant addition, and the mass transfer of HOC. Phenanthrene as HOC and Trition X-100, Tergitol NP-10, Igepal CA-720, and Brij 30 were used in the model simulations. The biodegradation rate was increased even with a small micellera-phase bioavailability. The biodegradation was not greatly enhanced due to decreased aqueous HOC concentration by increasing surfactant dose in both cases with and without micellar-phase bioavailability. The effect of sorbed-phase biodegradation on total biodegradation rate was not highly important compared to aqueous- and micellar-phase biodegradation. The model can be applied for surfactant screening and optimal design of surfactant-based soil bioremediation process.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2003

Three different surfactants, APG, Brij30, and SDS, were tested to study the characteristics of sorption on soil surfaces, washing ability, biodegradability, and electrokinetic removal. Kaolinite and phenanthrene were selected as a model soil and a representative HOC, respectively. Phenanthrene was sorbed on kaolinite up to 2,200 mg/kg dry soil. The APG, Brij30, and SDS were sorbed on soil to 40, 7, and 4g/kg soil, respectively. The washing ability of phenanthrene was in order of Brij30＆gt;SDS＆gt;APG. The biodegradability tested with sludge was in order of APG＆gt;Brij30＆gt;SDS. In the electrokinetic test, the highest removal efficiency was obtained with APG that exhibited the highest electroosmotic flow. To increase the removal efficiency of HOC in the electrokinetic remediation, the most important factor was the selection of surfactant which maximized the electroosmotic flow.

• Composites Research
• /
• v.21 no.4
• /
• pp.7-14
• /
• 2008

Prediction of the load-bearing capacity of an adhesive-bonded Joint is of practical importance for engineers. This paper introduces interface fracture mechanics approach to predict the load-bearing capacity of composite metal bonded joints. The adhesion strength of composite/steel bonding is evaluated in terms of the energy release rate of an interfacial crack and the fracture toughness of the interface. Virtual track closure technique (VCCT) is used to calculate energy release rates, and hi-material end-notched flexure (ENF) specimens are devised to measure the interfacial fracture toughness. Bi-material ENF specimens gave consistent mode II fracture toughness $(G_{IIc})$ values of the composite/steel interface regardless of the thickness of specimens. The critical energy release rates of double-lap joints showed a good agreement with the measured fracture toughness. Therefore. the energy-based interfacial fracture characterization can be a practical engineering tool for predicting the load-bearing capacity of bonded joints.

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.35-42
• /
• 2005

This study reports the effect of $Mg^{2+}$ ions on the behavior of the anionic surfactant in electrophoresis. Intractions of $Mg^{2+}$ ions with carboxylates and sulfonates resulted large changes in their apparent mobilities. A comprehensive analysis of the electroosmotic and electrophoretic mobilities reveals that major cause for the variation of the apparent mobilities of anions arises from the electroosmotic mobilities.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.211-211
• /
• 2013

나노 크기의 공간에서의 물질의 이동은 표면의 환경에 의해 영향을 받을 수 있다. 소수성그래핀과 친수성 실리콘 기판 사이의 계면에서의 물의 확산은 호기심을 자극할 뿐만 아니라 그래핀 소자의 특성을 좌우하는 전하도핑(charge doping) 현상을 이해하는데 중요한 모델이 된다. 본 연구에서는 라만 분광법과 원자 힘 현미경을 사용하여 그래핀/SiO2 계면 사이의 물의 확산 현상과 그에 따른 정공 밀도 변화를 탐구하였다. 열처리 된 그래핀은 기판과의 상호 작용에 의해 높은 밀도의 정공(electron hole)으로 도핑 되어 있으며, 이를 물에 담지 하였다. 본 실험에서는 이차원 라만 분광법을 통해 물 속에 담겨진 그래핀의 정공 밀도의 공간적인 분포를 확산 시간에 따라 조사하였다. 물의 확산은 시료에 따라 수 시간에서 수 일의 시간대에 걸쳐 그래핀 가장자리에서 중앙으로 이루어진다는 사실을 확인하였다. 또한 물의 계면 확산으로 인하여 전하 밀도가 감소한다는 사실은 열처리 된 그래핀의 정공 도핑을 유발하는 산소가 계면에 존재한다는 것을 증명한다.

• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.157-161
• /
• 2012

Magnetism at the interfaces of rocksalt structured half-metals, NaN and CaN were investigated by use of the first-principles band calculations. The electronic structures for the simple interface and mixed interface systems were calculated by the FLAPW (full-potential linearized augmented plane wave) method. From the calculated number of electrons in muffin-tin spheres of each atom, we found, for the simple interface system, that the magnetic moment of the N atom in the CaN (NaN) side is increased (decreased) compared to those of inner N atoms. For the mixed interface system, the magnetic moments of the interface N atoms are similar to the averaged value for the inner N atoms in CaN and NaN side. Among four interface N atoms, the N atom connected to Na atoms in the upper and down layers has the largest magnetic moment and that connected to Ca atoms has the smallest. The number of p electrons in each N atom and the calculated density of states explain well the above situation.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.226-233
• /
• 2007

In this study, the effects of additives such as ionic surfactant and cosurfactant were studied on the solubilization of sulfur compounds contained in the crude oil by Tergitol series nonionic surfactants. It was found that the addition of an ionic surfactant such as sodium oleate, potassium oleate, CTAB and DTAB did not enhance solubilization capacity of Tergitol series nonionic surfactant. On the other hand, the addition of a long-chain alcohol as a cosurfactant increased the solubilization of sulfur compounds in the crude oil. The effect of alcohol was found to become reduced with an increase in the amount of crude oil used mainly due to partitioning phenomena of an nonionic surfactant. The enhancement of solubilizing capacity of Tergitol series nonionic surfactant with addition of a cosurfactant was associated with a decrease in interfacial tension between crude oil and surfactant solution. The pH of Tergitol nonionic surfactant solution did not affect the solubilization of sulfur compounds. Finally, it was found that the growth of sulfur reducing microoganisms was not greatly affected by both addition of nonionic surfactant and cosurfactant.

• Journal of Adhesion and Interface
• /
• v.16 no.4
• /
• pp.162-165
• /
• 2015

• Journal of Adhesion and Interface
• /
• v.19 no.1
• /
• pp.50-54
• /
• 2018

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2008

Phenanthrene uptake by surfactant sorbed on activated carbon was investigated to recycle of surfactant in washed solution for contaminated soil. The partitioning of phenanthrene to the activated carbon coating with Triton X-100 as a surfactant was also evaluated by a mathematical model. Phenanthrene-contaminated soil (200 mg/kg) was washed in 10 g/L of surfactant solution. Washed phenanthrene in solution was separated by various particle loadings of granular activated carbon through a mode of selective adsorption. Removal of phenanthrene was 99.3%, and surfactant recovery was 88.9% by 2.5 g/L of granular activated carbon, respectively. Phenanthrene uptake by activated carbon was greater than that of phenanthrene calculated by a standard model for a system with one partitioning component. This is accounted for enhanced surface solubilization by hemi-micelles adsorbed onto granular activated carbon. The effectiveness factor is greater than 1 and molar ratio of solubilization to sorbed surfactant is higher than that of liquid surfactant. Results suggest that separation of contaminants and surfactants by activated carbon through washing process in soil is much effective than that of calculated in a theoretical model.