• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.41-47
• /
• 2018

The buoy-enabled underwater surveillance system is a device that is installed in a particular sea area and operated for a certain period of tine and moved to another sea area after recovery. In this paper, a mooring method which is applied for a buoy-enabled underwater surveillance system was selected to maintain installation and enure stable operation. Also, the structure of the mooring line was designed. Two-point mooring method was selected considering interference with the communication cable of array-assembly. The composite structure of buoy chain, nylon rope, and anchor chain is designed as the basic component of mooring line. For the verification of design, a numerical simulation and wave tank experiment were performed. Their results were confirmed similarity in test condition. Finally, the mooring lines were designed for the environment of the sea trial location. The mooring line produced by the final design confirmed the stability above the significant wave height considered in the design on the sea trial.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.49-50
• /
• 2017

• Journal of Navigation and Port Research
• /
• v.34 no.5
• /
• pp.311-317
• /
• 2010

Mobile Harbor(MH) is a new paradigm for maritime transport system introduced in Korea, the target of which is to carry out ship-to-ship cargo operation rapidly and effectively even under a condition of sea state 3. A MH ship is moored alongside a large container vessel anchored at the defined anchorage and also equipped with gantry cranes for handling containers. The MH study concerned includes rapid container handling system, optimum design for floating structure, hybrid berthing & cargo operation system, design for cargo handling crane, etc. This paper is to deal with a conceptual design of a stabilized mooring system and mooring equipment under a condition of ship-to-ship mooring. In this connection, we suggest a positioning control winch system in order to control heave motions of the MH ship which is to add constant brakepower and stabilized function to an auto-tension winch and mooring equipment used currently in large container ships.

• 어항어장
• /
• s.104
• /
• pp.25-30
• /
• 2013

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.819-826
• /
• 2022

Recently, interest in smart port systems for linking with autonomous ships is increasing. To build a smart port system, primarily, a system that can automatically moor a vessel is required. To calculate the allowable mooring capacity of the automatic mooring system in a port, the characteristics of the vessel must be considered, and the external force generated from environmental disturbances in the sea must be accurately calculated. Accurately estimating the magnitude of these environmental disturbances is an extremely important factor for designing an automatic mooring system. In this study, the mooring capacity of the HANBADA was estimated according to the port and fishing port design criteria of the Ministry of Ocean and Fisheries. The longitudinal and lateral forces of the mooring force acting on the HANBADA were 18 kN and 248 kN, respectively, under the most extreme ocean conditions (BF 6).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.148-150
• /
• 2012

바람이나 파도에 의해서 요트 계류장과 요트 사이 또는 요트 계류장과 계류장 사이에는 충격이 발생하는데, 이러한 충격으로 인하여 계류장 또는 요트가 파손되거나 전복된다. 특히, 방파제 없이 외해에 설치한 요트 계류장은 이러한 위기에 항상 노출되어 있어 이에 대한 대책이 시급한 실정이다. 논문에서는 요트 계류장의 롤링, 히브, 핏칭 등의 운동을 측정하기 위한 하드웨어의 구축과 평가에 관해서 기술하였다. 하드웨어는 MEMS 기반 자이로와 가속도계 등의 관성 센서를 내장한 반도체 센서 SD746을 이용하여 구축하였고, 구축한 하드웨어를 이용하여 소형 요트 계류장에서 발생할 수 있는 운동을 수작업으로 생성하여 측정 및 평가하였다. 실험결과 x-축, y-축, z-축 등 3축 가속도와 3축 각속도 측정이 가능하여 요트 계류장의 운동 상태 모니터링이 가능함을 알았다. 본 연구는 추후 요트 계류장의 위기상태를 평가하고 통보하기 위한 시스템 구축에 이용할 예정이다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.140-145
• /
• 2018

This paper deals with the dynamical analysis of a two-point mooring vessel under surge excitations. The characteristics of nonlinear behaviors are investigated completely including bifurcation and limit cycle according to particular input parameter changes. The strong nonlinearity of the mooring system is mainly caused by linear and cubic terms of restoring force. The numerical simulation is performed based on the fourth order Runge-Kutta algorithm. The bifurcation diagram and several instability phenomena are observed clearly by varying amplitudes as well as frequencies of surge excitations. Stable periodic solutions, called the periodic windows, can be obtained in succession between chaotic clouds of dots in case of frequency ${\omega}=0.4rad/s$. In addition, the chaotic region is unexpectedly increased when external forcing amplitude exceeds 1.0 with the angular frequency of ${\omega}=0.7rad/s$. Compared to the cases for ${\omega}=0.4$, 0.7rad/s, the region of chaotic behavior becomes more fragile than in the case of ${\omega}=1.0rad/s$. Finally, various types of steady states including sub-harmonic motion, limit cycle, and symmetry breaking phenomenon are observed in the two-point mooring system at each parameter value.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.225-226
• /
• 2019

육상에서 발생한 부유쓰레기는 하천을 통해 해상으로 유입되어 선박 프로펠러 파손, 항로 점유 등 선박 운항 안정성에 지대한 영향을 미친다. 본 연구는 육상 기인 부유쓰레기의 해양 확산을 방지하고 나아가 선박 운항 안정성 확보를 위한 차단막과 차단막의 부유쓰레기 차단 성능 확보를 위한 플랫폼 및 계류, 앵커시스템 개발을 연구 목표로 한다. 본 구조물의 우선 설치 대상 해역은 가덕도 남동부 해안으로, 우천시 혹은 태풍 내습시 육상에서 발생하는 많은 해양쓰레기의 확산이 이루어지는 지역이다. 대상 해역의 환경하중 조건에서 플랫폼이 정상기능을 수행하도록 수치해석 기법을 기반으로 플랫폼 및 계류, 앵커시스템을 설계하고 설계 기준 적합성을 평가하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.953-959
• /
• 2018

This paper deals with controlling surge oscillations of a mooring vessel system under large external disturbances such as wind, waves and currents. A control synthesis based on Sliding Mode Control (SMC) with a Super-Twisting Algorithm (STA) has been applied to suppress nonlinear surge oscillations of a two-point mooring system. Despite the advantages of robustness against parameter uncertainties and disturbances for SMC, chattering is the main drawback for implementing sliding mode controllers. First-order SMC shows convergence within the desired level of accuracy, in which chattering is the main obstacle related to the destructive phenomenon. Alternatively, STA completely eliminates chattering phenomenon with high accuracy even for large disturbances. SMC based on STA is an effective tool for the motion control of a nonlinear mooring system because it avoids the chattering problems of a first-order sliding mode controller. In addition, the error trajectories of controlled mooring systems implemented by means of STA form in the bounded region. Finally, the control gain effect of STA can be observed in sliding surface and position trajectory errors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.980-991
• /
• 2023

To prevent accidents near the quay caused by a ship, ports are generally designed and constructed through navigation and berthing safety assessment. However, unpredictable accidents such as ship collisions with the quay or personal accidents caused by ropes still occur sometimes during the ship berthing or mooring process. Automatic mooring systems, which are equipped with an attachment mechanism composed of robotic manipulators and vacuum pads, are designed for rapid and safe mooring of ships. This paper deals with a displacement and velocity measurement system for the automatic mooring device, which is essential for the position and speed control of the vacuum pads. To design a suitable system for an automatic mooring device, we first analyze the sensor's performance and outdoor environmental characteristics. Based on the analysis results, we describe the configuration and design methods of a displacement and velocity measurement system for application in outdoor environments. Additionally, several algorithms for detecting the sensor's state and estimating a ship's velocity are developed. The proposed method is verified through some experiments for displacement and speed measurement targeted at a moving object with constant speed.