• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.101-104
• /
• 2010

Development and practical emerging construction technologies has been studied as one of key solution for overcoming these barriers. Many literatures indicated that effective performance evaluation methodologies are demanding for efficient applications of new technologies. This paper presents a performance evaluation methodology using construction simulation technique and introduces studies of two cases where the steel staircase system, as an new technologies was applied and where the conventional method of staircase concrete works. Productivity was measured and calculated by site observation and construction simulations. This results show the quantified influence of new technology to site personnels and assist them to make various decisions for using or not using the technology depending on their own situations.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.328-331
• /
• 2002

Hyperthermia용 안테나의 성능은 안테나의 임피던스매칭과 안테나 주위 조직의 SAR 분포에 의해서 결정된다. 본 논문에서는 FDTD 해석법을 이용하여 Coaxial-Slot 안테나를 계단형(stair-caseing)으로 근사화하여 분석하였고, 가열 특성을 개선시킬 수 있는 Hyperthermia용 안테나를 설계하였다. 또한 팁으로부터 슬롯 중심까지의 거리( $L_{ts}$ )와 슬롯 폭을 변화시키면서 hyperthermia 안테나의 공진 특성을 분석하였고 계단형 모델로 근사화된 안테나에서 간에 유기 되는 SAR 1g 평균 첨두치를 계산하였다. 본 논문에서 제안하는 안테나의 SAR 값은 1g 평균 첨두치는 180.7 W/kg으로 나타났고 최대 온도는 상승량은 8.6$^{\circ}C$로 나타났다.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.127-132
• /
• 1998

The present study is aimed to investigate flow characteristics of Two dimensional backward-facing step by numerical approach. A convection conservative difference scheme based upon SOLA algorithm is used for the solution of the two-dimensional incompressible Navier-Stokes equations to simulate the laminar, transitional and turbulent flow conditions at which the experimental data can be available for the backward-facing step. The twenty kinds of Reynolds number are used for the calculations. In an effort to demonstrate that the reported solutions are dependent on the mesh refinement, computations are performed on seven different meshes of uniformly increasing refinement. Also to investigate the result of inflow dependence, two kinds of the inflow profile are chosen for the laminar flow. As criterion of benchmarking the result of numerical simulation, reattachment length is used for the selected Reynolds numbers.

• Journal of computational fluids engineering
• /
• v.11 no.2 s.33
• /
• pp.25-31
• /
• 2006

A two-dimensional backward facing step flow is simulated by using URANS and Detached Eddy Simulations(DES) approaches. Turbulence models adopted for URANS and DES simulations are Spalart-Allmaras(S-A) model and Shear Stress Transport(SST) model. The target flow with ER=1.125, $Re_H=37,500$ is experimentally studied by Driver & Seegmiller. Various versions of DES have been tested in this paper. Results of the simulations are compared with the experimental data available to evaluate the merits and demerits of URANS and several versions of DES. URANS simulation converges to a steady state and hence unsteady characteristics are not featured. DES simulations in general successfully mimic large scale structures and oscillation characteristics of the flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.6
• /
• pp.735-746
• /
• 1997

A nonlinear low-Reynolds-number k-.epsilon. model of Park and Sung was extended to predict the flows over a step with inclined wall, where a boundary layer flow without separation and a separated and reattaching flow coexist. For a better prediction of the flows, a slight modification was made on the function of the wall damping( $f_{\mu}$) and the model constant ( $C_{{\epsilon}1}$) in the .epsilon.-equation. The model performance was validated by comparing the model predictions with the experiment. It was shown that the flows over a step with inclined wall are simulated successfully with the present model.ent model.

• Journal of computational fluids engineering
• /
• v.15 no.4
• /
• pp.40-45
• /
• 2010

The flow rate is higher in ACEO micro-pumps with step electrodes than in micro-pumps with planar asymmetric electrodes. In the present study, numerical simulations were made of a ACEO micro-pump with step electrodes to investigate the effects of electrode design parameters on the pumping flow rate. The electrical charge at the electrodes, the fluid flow, and potential were solved, taking into account the finite size of ions, that is, the steric effect. This effect is recognized to be capable of quantifying the electrical charge more accurately in the electrical double layer subject to high voltages. Geometrical parameters such as heights, widths, and gaps of three-dimensional electrodes were optimized to enhance the pumping flow rate. Moreover, the effect of amplitude and frequency of AC was studied.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1447-1454
• /
• 1991

본 로봇은 wheeled type과 legged type의 장점을 함께 가지고 있으므로 주행 속도가 빠르며 환경적응력이 좋다. 기존 로봇과 비교할때 Y.Icihkawa등이 개발한 HLV와 가장 유사하지만 모터 3개로 6개의 바퀴-다리 유닛을 구동하므로 모터15개로 5개의 바퀴-다리유닛을 구동하는 Ichikawa HLV와 동력전달구조에서 많이 상이하다. 뿐만아니라 본 로봇은 3개의 모터만 사용했기 때문에 주행제어가 훨씬 간단하고 제작 비가 저렴하며 장애물 및 계단승강시 걸음새가 훨씬 간단하다.(Ichikawa HLV 경우 뒷 쪽 2개의 다리를 동시에 들 수 없기 때문에 계단 승강시 몸체 회전을 적절하게 섞어야 한다.)

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.48-54
• /
• 2007

Surface of rapid prototype has inevitably stair-stepping error, which is attributed to the continuous building process of 2 dimensional area. In this study, rounded edge model was established to estimate the roughness of inclined surface which has stair-stepping error. To investigate the roughness of rapid prototypes, specimens that have various surface inclinations were manufactured by various types of RP machines. As the surface inclination increased, the roughness of the specimens manufactured by SL, FDM, or LOM process decreased, which coincides with the simulation results. However, surface roughness of 3DP specimen was almost independent of the inclination. Furthermore, as the angle of surface increased, roughness of poly-jet specimen also increased, which is attributed to the frictional behavior between writing head and scanned area.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.427-433
• /
• 2013

Stair climbing is one of critical issues for field robots to widen applicable areas. This paper presents optimal design on kinematic parameters of a new robotic platform for stair climbing. The robotic platform climbs various stairs by body-flip locomotion with caterpillar type main platform. Kinematic parameters such as platform length, platform height, and caterpillar rotation speed are optimized to maximize stair-climbing stability. Three types of stairs are used to simulate typical user conditions. The optimal design process is conducted based on Taguchi methodology, and resulting parameters with optimized objective function are presented. In near future, a prototype is assembled for real environment testing.

• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.145-153
• /
• 2009

We are generally applicate smoke control only vestibule about special escape staircase, it is one of some smoke control model of NFSC 501A. But there are some point at issue in this system. The smoke control system on supervision field of writer is smoke control only vestibule same as the other resemble field. Writer studied in the concrete to find a solution at this issue, and derived a conclusion the most reasonable system on the field is "same time smoke control for staircase and vestibule" by the engineering analysis considering stack effect.