• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.937-939
• /
• 2005

의료영상의 3차원 모델링은 의학 연구 및 교육, 환자 치료를 위해 보다 정확한 정보를 제공 할 수 있다. 따라서 본 논문에서는 동맥경화가 발생된 위치를 정확하게 파악하고 빠르게 진단하는데 도움을 줄 수 있도록 3차원 개인 혈관모델의 자동생성 기법을 제안한다. 개인별 3차원 혈관모델을 생성하기 위하여 개인에 따라 모양이 다른 혈관조영사진에서 추출된 혈관영역을 기반으로 표준 모델을 변형 및 조정한다. 즉, 표준모델을 2차원으로 투영시킨 영상과 개인별 2차원 혈관영상에 대응되는 특징점을 추출하고 각 특징점의 이동량을 계산한 뒤 이 결과를 3차원으로 역 투영시킴으로써 변형된 새로운 혈관 모델을 생성한다. 3차원 혈관모델을 통하여 질병의 진행 및 차도를 환자들이 시각적으로 확인할 수 있으므로 높은 안정감을 주며 빠르고 정확한 진단으로 오진율을 감소시킬 것으로 기대된다.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.21-27
• /
• 2000

To develop the underfill materials which are required for the new process of semi-conductor industry, the properties of epoxy/anhydride/cobalt(II) catalyst system with two types of fused silica(1 $\mu\textrm{m}$, 8 $\mu\textrm{m}$) are studied as a function of filler fraction. According to the curing profile, the optimum catalyst amount was 1.0 wt% for full curing at the conditions of $160^{\circ}C$/l5 min., and we could conclude that the viscosity has superior effect on the real flaw through the relationship between surface tension and viscosity data. The underfills which were filled with 1 $\mu\textrm{m}$ fused silica did not show good flowability, but they should be useful by improving the viscosity for a future process which has small gaps. The underfills which were filled with 8 $\mu\textrm{m}$ fused silica showed good flowability when the filler contents were 55~60 vol%. The model which was referred by Matthew can predict the real flow length only when the underfill has high viscosity and low surface tension.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.101-110
• /
• 2014

Expansion agent is a very effective admixture for prevention of cracking due to autogenous/drying shrinkage and this can induce internal chemical prestress to embedded reinforcement. In this paper, tension-softening and hardening in cement mortar with steel and CSA expansion agent are experimentally evaluated. Cement mortar with steel reinforcement is prepared and tensile strength test is performed for evaluation of cracking and tensile behavior. In spite of slightly reduced strength and elasticity in CSA mortar, significantly increased tension-hardening behavior is evaluated in CSA mortar with induced chemical prestress. Furthermore previous tension softening models are compared with the test results and improvement are proposed.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.133-140
• /
• 2013

Carbon fiber reinforced polymer (CFRP) composites consist of carbon fibers in a polymer matrix. Recently, CFRP composites having high thermal stability and low outgassing are finding their use in high performance materials for aerospace and electronics applications under high temperature and high vacuum conditions. Cyanate ester resin is one of the most suitable matrix resins for this purpose. In this study, proper combination of cyanate ester and catalyst, curing behavior, and cure cycle were determined by chemorheology. Optimum condition was found to be catalyst content of 100 ppm and curing temperature of $150^{\circ}C$. Thermal stability and outgassing of cured resin composition were analyzed and the results showed thermal decomposition temperature of $385^{\circ}C$ and total mass loss of 0.29%. The CFRP prepregs and subsequent composites were fabricated by predetermined resin composition and the cure condition. Tensile moduli of the composites were compared with theoretical models and the results were very consistent.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.193-201
• /
• 2000

교란상태개념(Disturbed State Concept;DSA)모델릉 이용하여 포화사질토의 동역학적 거동을 모사하는 예측기법을 개발하였다. 실내진동전단시험 자료로부터 DSC모델 매개변수를 찾고, DSC 모델을 이용하여 전개한 응력중분과 변형률중분의 관계를 표현하는 탄소성구성방정식으로부터 진동하중을 받는 지반재료의 간극수압 및 유효응력 변화, 그리고 축자응력-축방향변형률 거동을 예측하였다. 압축 및 인장 재하시에는 DSC모델을 사용하여 변형률 경화(strain-hardening)및 진동하중에 의한 변형률 연화(cyclic-softening)현상을 모사하고, 제하(unloading)시에는 선형탄성모델을 사용하여 근사화하였다. 예측 결과를 실내전단시럼 결과와 비교하여 예측기법을 검증하였다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.11a
• /
• pp.107-112
• /
• 2002

• Geotechnical Engineering
• /
• v.13 no.1
• /
• pp.35-46
• /
• 1997

The isotropic single-hardening constitutive model has been applied to predict the behavior of soils during reorientation of principal stresses in the field. The predicted response by the model agrees well with the measured behavior for a series of torsion shear tests performed on hollow cylinder specimens of Ko consoildated clay along various stress -paths. This indicates that the soil behavior during reorientation of principal stresses can be predicted by using the model with application of simple informations given by isotropic compression tests and conventional consolidated-undxained triaxial compression tests. Isotropic elasto-plastic soil behavior has been served during primary loading from both the torsion shear tests and the predictions by the model. However, the directions of maj or principal strain increment given by the model have not coincided with the directions for tests during stress reversal, such as unloading and reloading, within isotropic yield surface for Ko consolidated stress. This indicates that kinematic hardening model instead of isotropic hardening model should be developed to predict the soil behavior during stress reversal. The experimental strain increment vectors in the work-space have been compared with the directions expected for associated and nonassociated flow rules.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.56-64
• /
• 2020

Service quality research is being conducted actively to improve customer satisfaction in various fields, but no research has been done on the service quality of small arms in the national defense. To enhance the user satisfaction and quality of small arms, this study aimed to derive the main quality attributes, measure the current level of satisfaction, and explore the elements requiring improvement. For this, a questionnaire survey based on the Kano model and SERVQUAL model was conducted on the identified service quality factors through discussions of experts involved in the production, quality assurance, and operation. All service quality factors were classified as one-dimensional elements, and an analysis of the Kano-SERVQUAL integrated approach showed that the user's expectation and dissatisfaction coefficient had a strong positive correlation with a 1% significance level, and user's perception value and satisfaction coefficient had a negative correlation with the 1% significance level. Using the Kano-SERVQUAL integrated approach, the priority service quality attributes for small arms requiring improvement among the many areas of service quality could be identified. Overall, it is expected that service-quality-level measurements can be used to improve the quality level of munitions as well as user satisfaction.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.272-278
• /
• 2011

In the present work, FEM analyses are carried out to investigate the fractures occurred within the structural part in the course of combustion experiment. The loss of structural integrity stems from the localized deformation and the damage induced due to a severe change in the thermal load. Moreover, the two-back stress evolution model is proposed using the Armstrong-Frederick and the Phillips' rules to depict the plastic deformation, and the continuum damage mechanics is also incorporated into the present model. It is noted that the present model is able to formulate a wide range of constitutive description with ease. The numerical results depicts that a severe strain localization and damage evolution can be obtained depending on the dominant back stress.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.30-33
• /
• 2009

본 논문에서는 형상기억합금의 특징적인 거동을 모사하기위한 구성방정식을 제안한다. 제안되는 구성방정식은 기존의 소성모델을 기초로 하는 현상학적인 모델로, 소성 경화이론에서 사용되는 항복곡면에 대응되는 상변이 곡면을 정의하여 형상기억합금의 비선형 거동을 모사한다. 단, 상변이 곡면이 1개만 존재하는 소성모델과는 다르게, 오스테나이트에서 마르텐사이트로의 정방향 상변이와 마르텐사이트에서 오스테나이트로의 역방향 상변이를 각각 해석하기위해 독립적인 2개의 상변이 곡면을 정의해주게 된다. 기계적 하중만이 아닌 열적 하중의 변화에도 비선형 거동을 보이는 형상기억합금의 특성을 반영하기위해 상변이 곡면은 응력과 온도의 함수로 정의되며, 이렇게 정의된 상변이 곡면을 바탕으로 리턴 매핑 알고리즘을 적용하여 열적하중과 기계적하중의 변화에 따른 형상기억합금의 거동을 모사하는 구성방정식을 제안하였다.