• Journal of the Korea Convergence Society
• /
• v.11 no.6
• /
• pp.209-213
• /
• 2020

In this study, the model A with the existing shape used at racing car and the model B with light weight were designed. The structural analysis with thermal deformation and stress were carried out. Model A shows that the maximum temperature is lower than model B. The cooling performance due to the shape of the disk without any other cooling conditions can be shown to be better for model A. Model A was seen to be superior in durability as the thermal stress reduced by almost twice as much as model B. The part where the greatest stress occurred appeared to be the hole jointed with the hub regardless of its shape. The analysis results at this study are seen to be useful at designing the shape of the actual vehicle brake disc. The analysis results obtained in this study can be applied at grasping the strength of the brake disk for racing car practically. By utilizing the analysis result of the brake disk for racing car, this study is seen as the convergence study that the aesthetic design and analysis are applied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1752-1758
• /
• 2006

Racing game requires plausible physics model that can be simulated in realtime. Minor artifacts in racing games are easily noticed, and any kinds of games should work interactively. It is difficult to model the accurate tire-ground physics and to integrate the model into realtime environments. In this paper, an efficient and effective 'imaginary wall' model was proposed. The method can be easily implemented because of the simplicity of the physical model used, and the result of the simulation is realistic enough for the racing games.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.23-34
• /
• 1987

연소 기관용 연료의 효율적 이용과 연소 효율 향상을 위한 연소 기술의 개발에 더욱 노력을 경주 하여야 한다. 이러한 관점에서 연소 기술의 개발과 더불어 새로운 대체연료에 관한 연구가 더욱 활발히 이루어 져야 할 것으로 생각된다. 그러므로 여기서는 대체 연료로 기대되는 석탄액화유, 알코올연료, 태양에너지 중에서 연소 기관용 연료로 주목되고 있는 알코올연료의 특성과 연소 기관의 적용성과 그 문제점에 대하여 살펴 보기로 한다.

• Composites Research
• /
• v.26 no.1
• /
• pp.42-47
• /
• 2013

In this study, an economical and effective processing technique to form multiple dimples on the surface of a composite part, which are known to be useful to improve aerodynamic performance and heat dissipation. Forming dimples on the surface using molds is an expensive processing because forming multiple tiny positive spheres on the surface of the mold requires much time and effort. In this study, plates with multiple round holes are utilized as a core to form dimples on the carbon/epoxy composite skin covering the core. A vacuum bagging process is used to apply pressure on the surface while curing. Composite parts which have multiple dimples on the surface can be utilized in the field which needs high aerodynamic performance and heat dissipation ability such as high speed sports car bodies.

• The Science & Technology
• /
• v.16 no.9 s.172
• /
• pp.8-19
• /
• 1983

- 공업계 전문대학 교육개선방안 워크숍 개최(과총 체계적 인력양성 수급위해) - 한, 불간 원전문제 협의(한불 원자력 조정회의) - 인쇄 제판용 필름제조기술 국산화에 성공(화학연, 첨단기술로 선진국만이 생산) - 컴퓨터로 움직이는 모형자동차 개발(기계연, 4기종 6종류로 고속경주용까지) - VTR SERVO CONTROL IC개발(전자기술연, IC3, IC4도 계속연구)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2011

The purpose of the study is to enhance the vehicle handling stability of the PACE formula vehicle. Required data for the dynamic analysis of the vehicle are as follows: Mass, moment of inertia, and tire's dynamic properties. Mass and moment of inertia data were calculated using Siemens NX 5.0 which results were verified with VIMF measurements of GMDAT. Dynamic data for the tire were supplied by Kumho Tire. Aerodynamic forces play an important role in the formula vehicle which forces were calculated by using Fluent. Full vehicle dynamic analysis using Carsim software has been carried out to find out the improvement of the vehicle stability by changing the shapes of the rear wing.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1317-1324
• /
• 2011

We propose a method operated in a vehicle to measure light absorption of particles in atmosphere. The advantage of this method is that it is insensitive to light scattering and hence can be used for the direct measurement of the light absorption coefficient without suffering from light scattering. With this method atmospheric light absorption can be measured at a time constant of 10 s. Further, our method allows for the real-time measurement of light absorption near a highway. The light absorption coefficients were high near a race track, an airport and the main gate where vehicles emitted carbonaceous particles.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.407-410
• /
• 2012

Recently, wireless network services are widely used, depending on the development of wireless network module technologies and the utilization gradually expanded, and thus is a trend that appears a lot of IT convergence industries. For this study, the OBD-II communication to Import your vehicle information, and other external devices in high-speed driving condition of the vehicle to verify the information system was developed to transfer data to an external server. From various sensors inside the vehicle using the OBD-II connector easily convert all users to read the information, then, Sent to the external server using the wireless network module, high-speed vehicle status check system was implemented. It was to test the performance of the system was developed using the actual circuit in a high-speed road racing vehicles. Transfer data generated from high-speed driving vehicles through the OBD-II scanner and check the status of a high-speed vehicle system was confirmed that this data is normally received. In the future, these new cars convergence of IT technology will grow as a new field of research.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.18-23
• /
• 1982

최근 자동차의 고속경향화 추세는 많은 진전을 보고 있으며 또 앞으로도 많은 연구와 노력이 경주되어야 하리라고 본다. 그 가운데 하나로 스프링의 경량화는 대략 다음과 같은 3방향에서 연구되고 있다. 1) 복합재료, 즉 GFRP(carbon fiber reinforced plastics), 나아가서는 BFRP(born fiber reinforced plastics)의 탄선과 경량성을 이용한 스프링. 2) 형상, 즉 구조적인 면에서 스프링소재를 후판으로 사용함으로서, 다매물에서 단매 또는 소수 매의 거물곡선 스피링(parabolic taper spring)으로의 변진. 3) 고응력 사용, 즉 종래의 스프링량보다 높은 탄성을 가진 재료로써 스프링 응력을 톺게 사용할 수 있는 강종의 개발 등이다. 특히 3)의 탄성한을 \ulcorner이는 문제는 2)의 후재화와 더불어 열처리성, 가공성 등이 문제가 되어 이에 따라 신강종으로서의 변천을 강요하게 된다. 그러므로 국제경쟁력을 강화하기 위하여 각국 들이 활발하게 연구 및 개발을 추진하고 있는 현상이다. 우리나라의 경우 현재 제작기술은 어느 정동 많이 축적되고 있으나, 아직 R&D면에서는 점진적으로 추진되고 있다. 이와 같은 실정에서 자동차산업의 국제화와 더불어 종래 사용된 스프링강재의 재검토가 우리나라에서도 긴급히 필 요하게 되었따. 그 예로서 KS SPS5(JIS SUP9)의 강종이 종래 일본에서 자동차용스프링의 대 종을 이루고 있던것이 최근에는 SUP9A로 전환되고 있다. 이것은 SUP9A는 SUP9보다 기계적 성질이 우수하며, 또한 자동차분야의 세계제일위인 미국의 SAE5160재와 일지되고 있다. 그러므로 국제화 경향과 더불어 SUP9종은 SUP9A로 전환되고 있으므로서 우리 나라의 경우에도 자동차 스프링의 수출용은물론이고, 국내용에도 SUP9A에 해당하는 규격이 제정되고, 또한 빠른 전환이 필요하다고 본다. 이와 같은 국제적인 추세는 SUP6을 SUP7H종으로 더욱 향상된 것이 실용 화되고 있다. 아래에서 이에 대한 기계적 특성을 중심으로 검토키로 한다.

• Composites Research
• /
• v.28 no.3
• /
• pp.124-129
• /
• 2015

CNT and GNP have several excellent mechanical properties including, high strength, Young's modulus, thermal conductivity, corrosion resistance, electronic shielding and so on. In this study, CF/CNT, GNP/epoxy composites were manufactured by varying the CNT weight ratio at 2wt% and 3wt%, GNP weight ratio at 0.5wt% and 1 wt%. The composites were manufactured by mechanical method (3-roll-mill). Tensile, impact and wear tests were performed according to ASTM standards D638, D256 and D3181 respectively. The results showed that, CF/GNP0.5 wt%/epoxy composites gave good mechanical property in all composites, e.g., tensile strength, impact and were resistance.