• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2833-2845
• /
• 2012

In this study, the amount of waste resource that could be recovered was analyzed. The installation and operation costs of waste resource recovery for both single- and multi-regional facility were calculated, and compared with the costs of landfill to investigate the feasibility of them. RDF(Refuse Derived Fuel) process and resource recovery by incineration process were considered as waste resource recovery facility. And, the multi-regions for cost analysis were established on the basis of the proper generation rate of municipal waste with the consideration of combustible ratio. The study results showed that single region facility for both RDF and incineration process has no economic benefit, compared with the landfill method. For the multi-regional facility, RDF process could save a large cost than the landfill method, but the incineration facility couldn't. Separate from the economic benefits, the waste resource recovery should be importantly considered when considering the depletion of fossil fuel, global warming, environmental toxicity, and the enormous expenses due to social conflict and confuse. When the CDM(Clean Development Mechanism) is vitalized in the near future, the additional economic benefits by CERs(Certified Emission Reductions) could be expected. CERs for RDF facility is corresponding to about 256.5 billion won, and CERs for incineration facility is corresponding to about 54 and 77.4 billion won for single- and multi-regional facility, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.847-854
• /
• 2012

The demand for noise barriers and necessity for the installation are highly growing because residential areas have become diverse and locational priority is changed to consider how to approach highway easily. However, public annoyance to the noise generated from highway is continued despite lots of noise barrier are installed. Moreover, there are growing concerns to maintain noise barriers to be free from losing transparency, dust stack, and shock fracture. To resolve these issues, it is suggested to develop new polymer materials and conceptually new noise barrier. In this study, as a first step to develop a new noise barrier to overcome current technological challenges as well as economic issues, recent research trends have been analyzed and found the direction for the future research in terms of material, supplementary function, and patterning.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.123-130
• /
• 2024

There are various methods for restoring the dentition of completely edentulous patients. Removable complete dentures have the advantage of being relatively economical, but they can be uncomfortable to wear. With the introduction of implant prosthodontics, various options such as implant-supported overdentures and hybrid prostheses have become available. If there is inadequate remaining ridge or limited financial resources, an overdenture supported by a few implants with additional attachments may be more suitable. In this case, due to severe peri-implantitis and other complications, the implants were removed. Subsequently, four implants (two on each side) were placed in the maxilla and a milled-bar with attachment was fabricated for each side of the maxilla.

• Journal of Labour Economics
• /
• v.36 no.1
• /
• pp.63-91
• /
• 2013

This paper analysed the training effects on wage and employment security by the non-standard worker types by using Economically Active Population Additional Survey data. Through propensity score matching method, we found that the regular workers' training effect on wage was 4.2%, that was very higher than 2.7% of fixed-term workers. Logistic regression analysis showed that the training participation itself did not affect on the regular workers' regular position continuance, but training duration affected. Just in fixed-term workers among non-standard workers, both of training participation and training duration affected the transition from non-standard position to regular position. The result that both training effects on wage and on employment were positive just in the fixed-term workers might be interpreted owing to the clear employment contract relation between employer and employees.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.129-137
• /
• 2019

The purpose of this study is to analyze the efficiency of budget utilization of science and technology by the Chinese autonomous province and to present the direction of improvement. Data were obtained from the 2013-2017 statistical yearbook of higher education published by the Ministry of Education of China, and efficiency was analyzed using the malmquist analysis method. The analysis found that the low technological progress caused changes in the productivity MPI index, and that cities affected by technological efficiency needed to improve internal factors such as internal coordination and restructuring of universities in the region to increase efficiency. And it was found that areas affected by technological change needed proper response to external factors such as government policy, economic environment, social environment or technological development. This study is meaningful in that it presented reference data in enhancing efficiency of budget utilization of science and technology by autonomy of China, and it is necessary to establish strategies and study essential factors to increase efficiency of inefficient areas in the future.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.386-394
• /
• 2013

The purpose of the current study was to investigate the difference in recreation specialization levels based on the levels of leisure constraint negotiation and to examine the effect of leisure constraint negotiation on recreation specialization. A total of 374 skiers Kyonggi and Kangwon provinces was selected using the cluster sampling method. All respondents were divided into 3 groups based on the levels of leisure constraint negotiation and one-was ANOVA and regression analysis were conducted. The main findings were as follows: First, skiers were divided into 3 groups(high, middle, low) by the K-mean cluster analysis. Second, there were differences in past experience, centrality of life, financial investment, and overall recreation specialization based on the levels of leisure constraint negotiation. Finally, leisure constrain negotiation had a positive effect on recreation specialization.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.115-116
• /
• 2010

광역상수도의 경우 수자원공사 및 지방상수도 사업자들에 의해 전문적으로 수질을 관리하고 음용수를 보급하고 있으나 소규모 수도시설의 경우 전문능력을 갖춘 관리자가 아닌 마을의 대표자가 맡아 관리함에 따라 안정성 및 유지관리의 어려움이 자주 제기되고 있다.[1] 또한 소규모 수도시설의 경우 취수원으로 지하수나 계곡수를 이용하여 여과나 염소소독을 거쳐 음용수로 이용함에 따라 중금속 및 무기이온 등 각종 오염물질이 효과적으로 제거되지 않아 이를 사용하는 주민들이 불편함을 겪고 있는 실정이다. 환경부의 법정 수질 검사에 따르면 부적합 판정을 받은 곳의 대부분은 마을상수도와 소규모 급수시설인 것으로 나타났으며 초과 항목으로는 무기이온 중 특히 불소와 질산성질소 인 것으로 나타났다.[2] 이러한 문제점을 해결하고자 기존의 고도 정수처리 시설인 막여과, 오존처리, 활성탄 흡착 공정 등을[3-5] 적용하고 있으나 소규모 수도시설에 적용하기에는 유지관리, 규모, 경제적 측면 등 여러 한계점을 지니고 있다. 따라서 본 연구에서는 이러한 문제점을 해결하기 위한 방안으로 전기응집기술을 이용하여 음용수 수질기준을 초과하는 무기이온 중 불소와 질산성 질소를 제거하고자 하였다. 전기응집기술은 제거효율이 높고, 운전이 용이하며 부가적인 화학약품의 첨가가 불필요하다.[6,7] 또한 기존의 고도정수처리 기술에 비해 전기응집 공정은 처리효율과 경제적인 측면 모두를 만족시키고 있어 소규모 수도시설의 불소와 질산성질소를 효과적으로 제거할 수 있는 방안으로 판단된다. 본 연구에 사용된 실험장치는 직류전원공급장치 (DC power supply), 반응조, 전극으로 구성되어 있다. 직류전원공급장치는 최대전압 30 Volt, 최대 전류 30 Amper 까지 조절 가능하였으며 반응조의 크기는 14.5cm(w) ${\times}$ 9cm(L) ${\times}$ 22cm(H) 이고 실용적 1.5L이다. 반응조의 상부에는 전극이 고정될 수 있도록 0.5cm 간격의 홈을 만들어 제작 하였다. 전극은 가용성 전극인 알루미늄 (Al), 스테인레스스틸(SUS304)를 이용하였다. 이를 통해 전류밀도, 전극간격 등의 변수를 두어 최적의 전기응집 운전 조건을 파악하였으며 이는 소규모 수도시설의 수질개선 향상에 도움이 될 수 있을 것으로 판단된다.

• Journal of Service Research and Studies
• /
• v.10 no.2
• /
• pp.91-108
• /
• 2020

This study was performed to derive a modern service management model reflecting the philosophy of the new business administration. Service management as the modern business administration should be faithful to the spirit of modernity. In addition, service management must be faithful to the essence of service in service economy era. And since modern management is to manage organizations those are the central organizations of human society, it must be managed according to the common principles of the world. Management that satisfies these three management philosophy conditions is defined as modern service management. In this study, we analyzed that the existing service management framework does not meet these standards of modern management and derived an improved modern service management model. The modern service management model must be a management model that reflects the essence of intangible goods called service, it must be a management framework that reflects the modern spirit, and it must be a management model that reflects the common principles of the world required by the central organization of the modern economic society. Therefore, this study analyzed the modern spirit in addition to the service essence and the common principle of the world analyzed in the previous study, and presented a modern service management model with these three requirements. Also, examples of modern service management were presented. This study is a conceptual model, and analytical research is needed to demonstrate that this management model can consistently produce excellent management performance by strengthening empirical studies in the future.

• Korea Trade Review
• /
• v.42 no.5
• /
• pp.137-159
• /
• 2017

This study divides manufacturing in 18 countries including Korea, China, Japan and OECD countries into 11 areas and estimates and compares the technological efficiency of each industry. The traditional view of productivity is to increase production capacity through technological innovation or process innovation, but it is also influenced by the technological efficiency of production process. A Stochastic Frontier Production Model (SFM) is a representative method for estimating the technical efficiency of such production. First, as a result of estimating the production function by setting the output variable as total output or value-added, in both cases, the output increased significantly in all manufacturing sectors as inputs of labor, capital, and intermediate increased. On the other hand, R&D investment has a large impact on output in chemical, electronics, and machinery industries. Next, as a result of estimating the technological efficiency through the production function, when the total output is set as the output variable, the overall average of each sector is 0.8 or more, showing mostly high efficiency. However, when value-added was set, Japan had the highest level in most manufacturing sectors, while other countries were lower than the efficiency of the total output. Comparing the three countries of Korea, China and Japan, Japan showed the highest efficiency in most manufacturing sectors, and Korea was about half or one third of Japan and China was lower than Korea. However, in the food and electronics sectors, China is higher than Korea, indicating that China's production efficiency has greatly improved. As such, Korea is not able to narrow its gap with Japan relatively faster than China's rapid growth. Therefore, various policy supports are needed to promote technology development. In addition, in order to improve manufacturing productivity, it is necessary to shift to an economic structure that can raise technological efficiency as well as technology development.

• Journal of Digital Contents Society
• /
• v.19 no.3
• /
• pp.595-603
• /
• 2018

Recently, the government has been interested in the creative economy in order to create new added value through industries and cultures, jobs, and growth engines for talented people who have creative ideas. The government emphasized technology commercialization as a core task for the realization of the creative economy in the '5th Technology Transfer and Commercialization Promotion Plan' based on the 'Technology Transfer and Commercialization Promotion Act' in order to ensure that the technologies developed through R&D projects lead to new industries and job creation. It is necessary to study what kind of variables are influenced by specific variables in the utilization and process of the developed technology to lead the results as the proportion of national R&D budget is increasing and it is linked to the achievement of R&D purpose. Therefore, an empirical study was conducted to measure factors affecting performance for practitioners who evaluate the performance of SME technology development projects. As a result, Readiness, Technological Performance and Competency Assessment effect Performance Assessment positively.