• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.8-14
• /
• 2020

According to the statistics provided by Korean Maritime Safety Tribunal for the year 2018, the majority of marine accidents in the past four years have occurred in fishing boats and small-sized boats. Negligent behavior resulting from not looking outside and non-compliance with navigation laws are the primary reasons behind ship collisions. Although safety education and training are reinforced to prevent such accidents, they still occur frequently. Hence, technical methods are continuously being developed to reduce ship collisions caused by human cause. The objective of this study is to reduce ship collisions by employing the WAVE communication system, which has short transmitting and receiving periods that can be incorporated for high-speed small-sized vessels. In this study, the suitability of the communication range was examined, and the appropriate range and timing for avoidance motion were accordingly selected, and a control algorithm based on the same was thereby designed. Consequently normal operation of the collision avoidance system was verified by connecting and simulating the proposed WAVE communication router-controller-steering equipment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.821-827
• /
• 2015

Electromagnetic waves which are emitted from the Sun due to solar flare explosion can cause failures in HF radio communications in the day-side area of the Earth, that is so-call as Radio Blackouts. The international scale representing the severity of the Radio Blackouts is determined by the solar X-ray flux which is measured by United States Geostationary Operational Environmental Satellite. However, the scale is not always applicable to HF communication users in the different area on the Earth, because the HF communication effects depend not only on the X-ray strength but also on the subsolar point location. To solve this problem, we developed a HF radio spectrum monitoring system utilizing a spectrum analyzer. This system conducts a real-time measure of the HF spectrum, and automatically calculates signal to noise ratios and the occurrences of the HF blackouts as comparing with the interference level which is described from the ITU recommendation.

• Fire Science and Engineering
• /
• v.20 no.1 s.61
• /
• pp.23-27
• /
• 2006

With the development of the today's advanced industry civilization, We are always inhering a safety frigidity about disasters of various kinds when and where we may happen. The fires and disasters to be enlarged day by day are reported everyday through the mass communication. Therefore, a prevention countermeasure about the every kind fire and disaster is above all important along the social and the days requirement. As a kind of such countermeasure, this paper is proposed about automatic transmission system of disasters alarm by using wire and wireless communication network. The automatic transmission system prevents the unexpected fire or disaster from a sudden occurrence at the house, industrial field or at the place without the human. The proposed system has the characteristic of high precision and high response speed comparing with conventional system. Also, as the proposed system is small size and lightweight, the users have economic advantage and simply install the system.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.79-88
• /
• 2020

This study analyzes the issue of the supply of force of fire in the high-rise buildings, and proposes an efficient method to do so. The results are as follows. First, in terms of Detect fire, it is necessary to shorten force of fire supply time by diversifying fire alarms such as alarms, vibrations, and voices from outside, clarification of fire occurrence points, and marking of fire. Second, with regard to communication signals, strengthening the installation target of wireless communication auxiliary facilities, supplementing the installation of repeaters, and constructing a multicommunications network were proposed. Third, in terms of Decide action, it is necessary to supply firefighter and firefighting equipment with the method of crossing of a river in adjacent buildings. Fourth, in terms of Respond to site, helicopters and emergency elevators are used to assist in the supply of firefighting equipment using drones. Easy-to-break glass windows and identification marks are required in every floor. Finally, in terms of applying fire suppressants, water can be supplied by means of a helicopter adjacent to the structure.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.85-90
• /
• 2013

Currently, the electric fire prediction system uses PIC(Peripheral Interface Controller) for controller microprocessor. PIC has a slower computing speed than DSP does, so its real-time computing ability is inadequate. So with the basic characteristics waveform during arc generation as the standard reference, the comparison to this reference is used to predict and alarm electric fire from arc. While such alarm can be detected and taken care of from a remote central server, that prediction error rate is high and remote control in mobile environment is not available. In this article, the arc detection of time domain and frequency domain and wavelet-based adaptation algorithm executing the adaptation algorithm in conversion domain were applied to develop an electric fire prediction system loaded with new real-time arc detection algorithm using DSP. Also, remote control was made available through iPhone environment-based app development which enabled remote monitoring for arc's electric signal and power quality, and its utility was verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.469-472
• /
• 2007

The telemedicine system provide an efficient means to monitor the status of health and measure bio-information even though the limitation of distance and time. The telemedicine system can be divided into two categories. The first one is Remote Support Service which can monitor the patient including home environments and give those diagnosis information to medical office. and the other one is Alarm Service that can be used for tile emergency status. For the convenience of the patient we will design and implement portable healthcare device and the telemedicine system under the wireless ZigBee network environments.

• Journal of Sensor Science and Technology
• /
• v.9 no.4
• /
• pp.256-267
• /
• 2000

In this paper, we studied the ultrasonic urine volume sensor of urinary alarm system for home use to detect the time of urination as a assistive methodology for the incontinence patients and the correlation between urine volume and bladder interwall distance by using developed sensor. The developed sensor was designed to minimize the measurement error by using ultrasound with 2.25 MHz center frequency which provides higher resolution as well as longer penetration depth. To verify usefulness of the developed sensor, we performed a preliminary experiment of estimating bladder volume from the measured distance between interior and posterior wall of bladder. In the preliminary experiment, bladder volume estimated from the result using a commercial ultrasonography system. The experimental results show there exists god correlation between the actual urine volume and the measured interwall distance of the bladder. In conclusion, the developed ultrasound bladder volume sensor can be applied to an urine alarm system which provides patient the exact time of urination, it will be contribute in health care and welfare society.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.99-107
• /
• 2014

Abruptly occurred obstacles on highway threaten driving safety. Radar draws the attention to the collision avoidance system because it can be fully operational in all weather, and day and night condition. This paper presents the design, implementation and performance test results of pulsed Doppler radar system for detection and warning of road obstacles. The system is designed to consider highway environment and detection capability about various fixed and moving obstacles. The system consists of 4 subsystems, which include antenna unit, transmitter and receiver unit, radar signal & data processing unit, and controller & display unit. The core technologies include clutter map based change detection for fixed obstacles detection, Doppler estimation for velocity detection of moving targets, and azimuth angle estimation method using monopulse for lane estimation and tracking. The design performance of the developed radar system is verified through experiments using a fixed reference target and moving vehicles in test highway.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.197-202
• /
• 2023

This paper presents the design method and electrical characteristics of a high-efficiency power amplifier for a 50 Watts class repeater applied to a 5G system and used in in-building, subway, and tunnel. GaN was used for the termination transistor of the power amplifier designed here, and intermodulation signals were removed using DPD to satisfy linearity. In addition, in order to handle various requirements such as amplifier gain control and alarm processing required in the 5G system, the microprocessor is designed to exist inside the power amplifier. The amplifier manufactured to confirm the electrical performance of the power amplifier satisfying these conditions satisfied 46.5 dBm and the overall efficiency of the amplifier was 37%, and it was confirmed that it satisfied various alarm conditions and electrical characteristics required by telecommunication companies.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.989-991
• /
• 2022

최근 들어 기후변화와 함께, 화재 발생이 증가함에 따라 인명피해와 경제적 피해가 늘고 있다. 화재 발생시 인명 피해를 줄여주는 소방시설 중 경보설비와 유도등설비는 위험 상황시 경보와 함께 동선을 유도하는 유도등을 보고 재실자들이 안전한 공간으로 신속하게 대피할 수 있도록 하는 소방설비 이다. 이중에서 유도등설비는 화재발생 상황에서 매우 중요한 역할을 맡고 있다. 특히 복잡한 동선을 가지고 있는 복합건물 및 지하철, 고층건축물에 신속한 대피 유도에 필요한 설비이다. 그러나, 화재 초기에 신속한 대피를 해야 하는데 5분도 되지 않아 화재로 인해 발생한 가스는 검은 연기로 유도등의 역할과 효과를 저해하는 현상을 가져온다. 즉 유도등의 녹색빛이 보이지 않는다. 이는 저시력자 또는 시력에 장애를 가지고 있는 자들은 더욱더 유도등을 확인하고 대피 하기란 쉽지 않게 된다. 이런 단점이 있는 기존의 유도등에 IoT(Internet of Things)와 함께 증강현실 이미지를 스마트기기에 활성화 한다면, 진한 검은연기로 인한 빛의 가림으로 인한 유도장애에 대해서 개선 할 수 있을 거라 생각되어, 변류기의 전류 감지를 시작으로 그 신호를 스마트기기에 녹색의 유도 이미지를 활성화하여 골든타임에 대피가 신속하도록 설비를 구현하여 그 가능성을 확인하였다.