• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.161-171
• /
• 1999

Impact resonance testing was carried out on small and large concrete blocks containing several types of artificial flaws respectively. Quantitative analysis of the observed peak frequencies in the impact resonance tests identifies the possible normal modes of concrete blocks containing flaws. and enables to determine the depth and size of the flaws in concrete blocks. In this study, concrete can be treated as a homogeneous and isotropic material. The flaw size and location at each section of artificial flaw series in small and large concrete blocks, determined through two-dimensional scanning of impact point and real-time fast Fourier transform, are in good agreement with real size location, respectively. Consequently, quantitative analysis method of vibration modes in the impact resonance tests, which can be applied for homogeneous and isotropic material, can be useful for the detection of flaws in any case of small and large concrete blocks in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.1
• /
• pp.41-49
• /
• 1997

Computational results from Navier-Stokes equations are presented for the Stokes-wave/flat-plate boundary-layer and wake for small wave steepness(Ak=0.01), including exact and approximate treatments of the viscous free-surface boundary conditions. The macro-scale flow indicate that the variations of the external-flow pressure gradients cause acceleration or deceleration of the streamwise velocity component and alternating direction of the cross flow. Remarkably, the wake displays a greater response, i.e., a bias with regard to favorable as compared to adverse pressure gradients. The micro-scale flow indicates that the free-surface boundary conditions have a profound influence over the boundary layer and near/intermediate wake. Order-of-magnitude estimates are conformed to the computational results. And appreciable errors are introduced through approximations to the free-surface boundary conditions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.65-65
• /
• 2011

하천의 하구지역은 유역의 보전, 개발 논의가 매우 다양하게 전개되고 있는 지역으로 개발계획들로 인한 환경변화로 유출 특성 및 유사이동 변화에 따른 정밀한 조사연구를 통한 대처방안을 수립이 필요한 지역이다. 본 논문은 2차원 수치해석이 가능하고 복잡한 해안구조를 포함한 하구지역의 흐름해석이 가능한 MIKE21 FM 프로그램을 통하여 홍수기시의 조위조건변화에 따른 수치해석을 수행하여 자연하구역인 한강하구지역을 중심으로 수위 및 유사이동의 변화 특성을 분석하였다. 첨두유량 발생 시점과 하류경계조건의 변화에 따른 하구지역의 수위변화를 살펴보면, 대상 지역의 하천구간에 해당하는 전류수위표 지점에서 기수역 수로 지점에 비하여 변동폭이 가장 크게 나타났으며, 하류의 외해와 인접할수록 변동폭이 줄어드는 것으로 나타났다. 또한, 대상지역의 상류구간은 하천유량의 영향이 크기 때문에 상류구간일수록 창조시간에 비하여 낙조시간이 길게 분포되는 것으로 나타난다. 유사이동의 특성은 하천의 유속이 크게 감소하는 부분에 퇴적이 발생되며 강화북수로의 단면이 급격하게 변화하는 석모도와 교동도사이의 수로, 염하수로의 입구부분에서는 퇴적층이 발달하는 것으로 나타났다. 따라서, 한강하구와 같이 하구둑이 설치되지 않은 하천의 하구지역에 대해서는 상류와 하류 경계조건의 특성에 따라서 복잡한 수리학적 특성이 발생하기 때문에 개발이나 구조물 축조에 앞서 더욱 많은 현장조사와 특성분석을 통한 보다 정확한 경계조건의 구축이 필요할 것으로 사료된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.2
• /
• pp.170-178
• /
• 2007

Most of parabolic approximation models employ a relatively limited open boundary condition in which there is no depth variation in the longshore direction outside of the computation domain so that Snell's law may be presumed to hold. Existing Kirby's condition belongs to this category and in the paper both modified Kirby's method and Dirichlet boundary condition are presented in detail and numerical results of three methods were shown. Judging from computation to wave propagations over a circular shoal in a constant depth, the method based on present Dirichlet boundary condition with fictitious numerical adjusting regions in both sides of the computation domain gives the least distorted amplitude ratio distribution.

• Geophysics and Geophysical Exploration
• /
• v.3 no.2
• /
• pp.61-69
• /
• 2000

The free-surface boundary conditions are persistent problem in elastic wave equation modeling by finite-difference method, which can be summarized with the degradation of the accuracy of the solution and limited stability range in Poisson's ratio. In this paper, we propose the mid-point averaging scheme as an alternative way of implementing the free-surface boundary conditions, and present the solution to Lamb's problem to verify our approach.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.41-50
• /
• 1993

This paper compares various potential based panel methods for the analysis of two-dimensional hydrofoil. The strength of singularity on each panel is assumed to be constant or linear. Robin boundary condition as well as Neumann and Dirichlet boundary conditions are applied to various formulations to evaluate the accuracies of the methods. Pressures and lifts are computed for various two-dimensional hydrofoil geometries and are compared with the analytic solutions. Extensive studies are performed on the local errors near the trailing edge, known to be sensitive to the foil geometry with sharp trailing edge and high camber. Robin boundary condition with the perturbation velocity potential formulation shows the best accuracy and convergence rate.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.287-296
• /
• 2019

In this study, the effect of ground boundary conditions on the evaluation of blast resistance performance of precast arch structures was evaluated by a numerical analysis method. Two types of boundary conditions, namely, fixed boundary conditions and a perfectly matched layer (PML) were applied to numerical models. Blast loads that were much higher than the design load of the target structure were applied to compare the effects of the boundary conditions. The distribution and path of the ground explosion pressure, structural displacement, fracture of concrete, stress of concrete, and reinforcing bars were compared according to the ground boundary condition settings. As a result, the reflecting pressure shock wave at the ground boundaries could be effectively eliminated using PML elements; furthermore, the displacement of the foundation was reduced. However, no distinct difference could be observed in the overall structural behavior including the fracture and stress of the concrete and rebar. Therefore, when blast simulations are performed in the design of protective structures, it is rational to apply the fixed boundary condition on the ground boundaries as conservative design results can be achieved with relatively short computation times.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2002.08a
• /
• pp.62-65
• /
• 2002

파랑은 주로 먼바다에서 바람에 의해 생성되어 육지로 전파해오면서 천수, 굴절, 회절, 반사, 부서 짐 등의 여러 가지 변형의 과정을 거친다. 이러한 파랑의 변형을 예측하는 한 방법은 비압축성 유체와 비회전류의 연속방정식인 Laplace 방정식을 지배 방정식으로 하고 해수면에서의 운동학적 경계조건과 동역학적 경계 조건, 그리고 바닥에서의 운동학적 경계조건을 적용하여 해를 구한다. (중략)

• Tunnel and Underground Space
• /
• v.15 no.5 s.58
• /
• pp.330-337
• /
• 2005

Apart from the geometric features of the rock joints, the shear characteristics of rock mass subject to shear force are also significantly affected by the boundary conditions in the neighborhood of the rock mass. The boundary conditions of the rock mass can be classified into 4 categories according to the stress state of the rock joint, of which the constant normal load (CNL) is the most used for shear test and produces the lowest shear strength and different behavior. In this study, the shear behavior under constant normal stiffness condition was able to replicated by the graphic method normalized by the test results under constant normal stress condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.772-775
• /
• 2007

본 연구에서는 Sentaurus를 이용하여 전압의 변화에 따른 항복전압과 전류의 경계 조건을 나타내려고 한다. 다이오드는 순방향 일 때 전류가 흐르고, 역방향 일 때는 전류가 흐르지 않는다. 하지만 역전압을 계속 올리면 어느 순간에 갑자기 전류가 흐르게 되는데 이때 전압을 항복전압이라 하며 전류의 경계조건은 컬렉터 전류의 변화에 따라 다르게 표현된다. 본 연구에서는 Sentaurus 시뮬레이션 프로그램을 이용하여 항복 전압과 전류의 경계조건을 설계하고자 한다.