• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.156-159
• /
• 2003

Surface normal vector and surface velocity are very important parameters to simulate rolling processes precisely. In this study, Local displacement functions are constructed for each node on the contact surface and parameters are found by the least square fitting of displacement on the neighbor nodes. Deformation gradient tensor is calculated from the displacement function and surface normal vector and velocity also can be derived. Flat rolling simulation model is presented on the basis of the suggested contact scheme. Series of rolling process simulation are carried out and the results are compared with the experiments.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.711-717
• /
• 2006

In order to study gas hydrate, potential future energy resources, Korea Institute of Geoscience and Mineral Resources has conducted seismic reflection survey in the East Sea since 1997. one of evidence for presence of gas hydrate in seismic reflection data is a bottom simulating reflector (BSR). The BSR occurs at the interface between overlaying higher velocity, hydrate-bearing sediment and underlying lower velocity, free gas-bearing sediment. That is often characterized by large reflection coefficient and reflection polarity reverse to that of seafloor reflection. In order to apply depth migration to seismic reflection data. we need high performance computers and a parallelizing technique because of huge data volume and computation. Phase shift plus interpolation (PSPI) is a useful method for migration due to less computing time and computational efficiency. PSPI is intrinsically parallelizing characteristic in the frequency domain. We conducted conventional data processing for the gas hydrate data of the Ease Sea and then applied prestack depth migration using message-passing-interface PSPI (MPI_PSPI) that was parallelized by MPI local-area-multi-computer (MPI_LAM). Velocity model was made using the stack velocities after we had picked horizons on the stack image with in-house processing tool, Geobit. We could find the BSRs on the migrated stack section were about at SP 3555-4162 and two way travel time around 2,950 ms in time domain. In depth domain such BSRs appear at 6-17 km distance and 2.1 km depth from the seafloor. Since energy concentrated subsurface was well imaged we have to choose acquisition parameters suited for transmitting seismic energy to target area.

• The KIPS Transactions:PartD
• /
• v.8D no.3
• /
• pp.285-294
• /
• 2001

Recently many efforts on the development of automatic processing system for delivery sequency sorting have been performed in ETRI, which requires the use of postal 4-state bar code system to encode delivery points. This paper addresses the issue on the extension of read range and the improvement of image processing method. For the improvement of image processing procedure, applied information acquisition method through basic two thresholds onto the horizontal axial line of gray image based on reference information of 4-state bar code symbology. Symbol values are computed after creating two threshold values based on the obtained information through search of horizontal axial values. The implementation result of 4-state bar code reader are obtained the symbol values within 30~60 msec (58,000~116,000 mail item/hour)without noise removal or image rotation in spite of the incline $\pm 45^{\circ}$.

• Korean Journal of Food Science and Technology
• /
• v.8 no.4
• /
• pp.207-211
• /
• 1976

Treated with various methods, body muscle of squid was cross section, stained by Van Gieson staining method, and observed microscopically to study on the state of thin layer of skin separated from meat. Results obtained were summarized as follows : 1. By general hot spring treatment were 1st. 2nd. and 3rd. layers of skin removed from squid muscle but 4th. not. 2. By boiling treatment was tissue of muscle fibre fissured largely toward the muscle fibre. 3. Sodium acetate treatment was superior to sodium nitrate, sodium sulfate and sodium tartrate treatment in the effect that the skin was separated from meat. Especially, concentrate solution of sodium acetate had the most excellent effect in the chemical reagent treatment. 4. By proteolytic enzyme treatment were 1st. 2nd. 3rd. and 4th. layers of skin removed all from squid muscle and the boundary fibre between skin and meat swelled in particular. 5. Two kinds of skin removing method, proteolytic enzyme treatment and sodium acetate treatment, were desirable to the actual processing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.47-54
• /
• 2006

In this paper, numerical algorithms applied in two-step eulerian scheme are investigated and implemented. Element quantities are advected with donor or van Leer algorithm. Nodal quantities are advected with Simplifed ALE [SALE] algorithm. Material interfaces are determined with Simple Line Interface Calculation [SLIC] algorithm. Practical aspects considered for code development are addressed in detail. The results of developed two-step Eulerian code are verified by comparing with those from pure lagrangian scheme and commercial code.

• Journal of KIISE:Software and Applications
• /
• v.33 no.10
• /
• pp.862-867
• /
• 2006

To restore image degraded by blur and additive noise in the optical and electrical system, a regularized iterative restoration is used. A regularization operator is usually applied to all over the image without considering the local characteristics of image in conventional method. As a result, ringing artifacts appear in edge regions and the noise is amplified in flat regions. To solve these problems we propose an adaptive regularization iterative restoration considering the characteristic of edge and flat regions using directional regularization operator. Experimental results show that the proposed method suppresses the noise amplification in flat regions, and restores the edge more sharply in edge regions.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.133-136
• /
• 2006

한정된 네트워크 대역폭을 가진 현재의 인터넷에서 영상의 품질을 향상시키기 위해 영상의 비트율을 높이는 것은 비용 등 여러 가지 문제로 인해 현실적으로 많은 어려움이 있다. 따라서 비록 충분하지 못한 비트율의 영상을 전송받더라도 전송받은 영상의 화질을 높이는 연구가 다양한 방법으로 진행되고 있다. 영상의 화질을 향상시키는 많은 방법 중 후처리 기법은 이러한 잡음을 효과적으로 제거 할 수 있으면서 동영상 압축 표준 복호기를 수정할 필요가 없기 때문에 좋은 해결책이 된다. 동영상의 압축 과정에서 낮은 비트율로 인해 발생하는 화질 열화 현상 중에 쉽게 완화 할 수 있고, 영상의 질이 비용 대비 높은 효율로 좋아지는 대표적인 현상이 블록화 현상이다. 일반적으로 블록화 현상은 영상의 고주파대역에서 나타나므로 본 논문에서 영상의 고주파 성분과 블록화 현상을 구분하기 위해 Sobel 마스크를 사용한다. 구분된 블록화 현상이 발생한 매크로블록의 양쪽 경계면에 4-tap 저주파 통과 필터를 사용하여 블록화 현상을 효과적으로 완화할 수 있다. 개선된 영상의 화질 평가 기법으로 신호처리 분야에서 많이 사용되는 객관적인 지표인 PSNR에 의한 평가와 함께 실제 인간의 시각을 기준으로 주관적이고 감성적인 관찰에 의한 평가를 함께 수행한다.

• The KIPS Transactions:PartA
• /
• v.12A no.4 s.94
• /
• pp.281-288
• /
• 2005

Efficient utilization of processing resources in a large multicomputer system with the possibility of fault occurrence depends on the reliable processor management scheme. This paper presents a dynamic and reliable processor allocation strategy to increase the performance of mesh-connected parallel systems with faulty processors The basic idea is to reconfigure a faulty mesh system into a maximum convex system using the fault-free upper or lower boundary nodes to compensate for the non-boundary faulty nodes. To utilize the non-rectangular shaped system parts, our strategy tries to allocate L-shaped submeshes instead of signaling the allocation failure. Extensive simulations show that the strategy performs more efficiently than other strategies in terms of the job response time md the system utilization.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.219-222
• /
• 2021

인공지능 기술은 모든 분야에서 혁신을 이뤄내고 있다. 이와 동시에 인공지능 모델에 대한 여러 보안적인 문제점이 야기되고 있다. 그 중 대표적인 문제는 많은 인적/물적 자원을 통해 개발한 모델을 악의적인 사용자가 탈취하는 것이다. 모델 탈취가 발생할 경우, 경제적인 문제뿐만 아니라 모델 자체의 취약성을 드러낼 수 있다. 현재 많은 연구가 쿼리를 통해 얻는 모델의 입력과 출력을 분석하여 모델의 의사경계면 또는 모델의 기능성을 탈취하고 있다. 하지만 쿼리 기반의 탈취 공격은 획득할 수 있는 정보가 제한적이기 때문에 완벽한 탈취가 어렵다. 이에 따라 딥러닝 모델 연산 과정에서 데이터 스니핑 또는 캐시 부채널 공격을 통해 추가적인 정보 또는 완전한 모델을 탈취하려는 연구가 진행되고 있다. 본 논문에서는 최근 연구 동향과 쿼리 기반 공격과의 차이점을 분석하고 연구한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.45-53
• /
• 2013

Global warming causes sea levels to rise and global changes apparently taking place including coastline changes. Coastline change due to sea level rise is also one of the most significant phenomena affected by global climate change. Accordingly, Coastline change detection can be utilized as an indicator of representing global climate change. Generally, Coastline change has happened mainly because of not only sea level rise but also artificial factor that is reclaimed land development by mud flat reclamation. However, Arctic coastal areas have been experienced serious change mostly due to sea level rise rather than other factors. The purposes of this study are automatic extraction of coastline and identifying change. In this study, in order to extract coastline automatically, contrast of the water and the land was maximized utilizing modified NDWI(Normalized Difference Water Index) and it made automatic extraction of coastline possibile. The imagery converted into modified NDWI were applied image processing techniques in order that appropriate threshold value can be found automatically to separate the water and land. Then the coastline was extracted through edge detection algorithm and changes were detected using extracted coastlines. Without the help of other data, automatic extraction of coastlines using LANDSAT was possible and similarity was found by comparing NLCD data as a reference data. Also, the results of the study area that is permafrost always frozen below $0^{\circ}C$ showed quantitative changes of the coastline and verified that the change was accelerated.