• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.77-83
• /
• 2004

Parallel coupled microstrip bandpass filter is widely used in microwave circuits. But this filter limits the filter applications because of the narrow bandwidth and the spurious passband at twice the basic passband frequency. In order to solve this problem, a method of the asymmetrical coupled microstrip lines on composite dielectric substrate is presented. Closed form method is used to analyze the asymmetrical coupled microstrip lines on composite dielectric substrate. An experimental filter is fabricated over $33\%$ bandwidth centered at 9GHz. Compared with the filter on a single substrate, this filter on composite substrate shows improvement of the spurious passband.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.147-156
• /
• 2008

In an uniaxial compressive test of a concrete standard specimen (150$\times$300 mm) the crack initiation and extension with the stress increase are the major reason of the failure, which is similar to the breakage of the particle bonding in the simulation by using particle bonded model, especially particle flow code in 3 dimensions (PFC3D) developed by Itasca Consulting Group Inc. That is the main motive to study the possibility of an uniaxial compressive strength test simulation. It is important to investigate the relationship between the micro-parameters and the macro-properties because the 3-dimensional particle bonded model uses the spherical particles to analyze the physical phenomena. Contact bonded model used herein has eight micro-parameters and there are five macro-properties; Young's modulus, Poisson's ratio, uniaxial compressive strength and the crack initiation stress and the ratio concerning the crack propagation with the stress. To simulate the compressive test we made quantitative relationships between the micro-parameters and the macro-properties by using the fractional factorial design and various sensitivity analyses including regression analysis, which result in the good agreement with the previous studies. Also, the stress-stain curve and the crack distribution over the specimen given by PFC3D showed the mechanical behavior of the concrete standard specimen under the uniaxial compression. It is concluded that the particle bonded model can be a good tool for the analyzing the mechanical behavior of concrete under the uniaxial compressive load.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.224.1-224.1
• /
• 2010

본 연구에서는 천연가스 수증기 개질반응에 니켈 촉매가 코팅된 금속 구조체 촉매를 적용하여 수소를 생산하였다. 금속구조체 촉매는 기존 펠릿 촉매가 충진 된 촉매반응기에 비해 열 및 물질 전달 특성이 우수하여 이를 여러 개질반응에 적용하고자하는 연구가 수행되어 왔다. 하지만, 기존 금속구조체 촉매의 개발에 있어 촉매와 금속 지지체간의 안정한 결합을 통한 열안정성 확보에 대한 문제는 여전히 해결과제로 남아 있다. 따라서, 본 연구에서는 니켈 촉매를 금속 지지체에 안정하게 부착하기 위한 금속 지지체 표면 처리 방법을 개발하였으며 금속 구조체의 형상에 상관없이 균일한 표면처리가 가능하였다. 개발된 표면 처리방법을 적용한 금속 구조체 촉매는 촉매와 금속지지체간의 결합력 향상으로 인해 120시간 이상 안정한 반응활성을 보였다. 또한, 빠른 공간속도에서도 펠릿촉매와 표면처리를 적용하지 않은 금속 구조체 촉매에 비해 높은 촉매 활성을 보였다. 뿐만 아니라, 본 연구에서 개발된 표면처리를 모노리스와 폼을 비롯한 다양한 형상의 금속구조체 촉매에 적용하여 기하학적 표면 특성에 따른 촉매의 활성 차이를 살펴보았다. 겉보기 표면적이 넓은 금속구조체일 수록 촉매의 고분산 코팅에 유리하여 높은 활성을 보였다.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.420-427
• /
• 1993

Dielectric thin film mirrors are embedded in multimode and single-mode fibers by a fusion splicing technique. The fibers with $45{\circ}$ angled embedded mirrors serve as ultra-compact directional couplers with low excess optical loss of 0.2 dB for multimode and 0.5 dB for single mode at 1.3 ${\mu}m$ and excellent mechanical properties. The reflectance is wavelength dependent and strongly polarization depencient. Far-field scans of the reflected output power measured with a white-light source show a pattern which is almost circularly symmetric with aspect ratio of 1.09 at 5% of the peak power. The splitting ratio in a multimode coupler measured with a diode laser source is much less dependent on input coupling conditions than in conventional fused biconical-taper couplers, indicating that these couplers are less susceptible to modal noise occuring in optical fiber communication systems. Spectral properties of multilayer internal mirrors normal to the fiber axis have been investigated experimentally, and a matrix analysis has been used to explain the results.

• Journal of the Korean Vacuum Society
• /
• v.14 no.3
• /
• pp.115-118
• /
• 2005

Structure analysis of model polymeric micelles, both for non-asosciative and associative cases is done by small angle neutron scattering method. Aggregation number of the hydrophobic cores and the lyotropic ordering transitions of aqueous solutions of poly(ethylene glycol)(PEG) (6 K or 10 K g/mol) end-capped with perfluoroalkyl groups $(-(CH_2)_2C_OnF_{2n+1}$ (n =6,8, or 10) are characterized. Aggregation number is mainly determined by the hydrophobe end group only, and is insensitive to polymer concentration or temperature. Also, there is no difference between non-associative micelles and associative micelles in terms of aggregation number. The model systems order into a BCC structure with increasing concentration.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.11-19
• /
• 2010

In this paper, H-plane filtering-horn antenna operating at millimeter frequency band is proposed with embedded filter and three-layered dielectric lens for frequency selection and maintenance of main beam direction, respectively. The waveguide-typed filter and H-plane sectoral horn antenna are replaced with considerably size-reduced PCB substrate-typed filtering antenna using via fences and several posts. The waveguide-typed filter and H-plane sectoral horn antenna were designed in air-filled waveguide and then combined into size-reduced PCB substrate. For the control of the thickness of dielectric lens, single and multi dielectric lens have been employed. As a result of antenna gain, 8 and 13.5 dBi have been obtained at 41.5 GHz, respectively, from the simulations of single and multi-lens antennas.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.16-22
• /
• 2013

A general characterization procedure based on the extraction of a 2n-port admittance matrix corresponding to n uniform coupled lines on the multi-layered substrate using the Finite-Difference Time-Domain (FDTD) technique is presented. In this paper, the frequency-dependent normal mode parameters are obtained from the 2n-port admittance matrix to analyze multi-layered asymmetric coupled line structure, which in turn provides the frequency-dependent propagation constant, effective dielectric constant, and line-mode characteristic impedances. To illustrate the technique, several practical coupled line structures on multi-layered substrate have been simulated. Especially, embedded conductor structures have been simulated. Comparisons with Spectral Domain Method are given, and their results agree well. It is shown that the FDTD based time domain characterization procedure is an excellent broadband simulation tool for the design of multiconductor coupled lines on multilayered PCBs as well as thick or thin hybrid structures.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1608-1613
• /
• 2012

A conventional kinesin, KIF5/Kinesin-I, transports various cargoes along the microtubule through interaction between its light chain subunit and the cargoes. Kinesin light chains (KLCs) interact with many different cargoes using their tetratricopeptide repeat (TPR) domain, but the mechanism underlying recognition and binding of a specific cargo has not yet been completely elucidated. We used the yeast two-hybrid assay to identify proteins that interact with the TPR domain of KLC1. We found an interaction between the TPR domain of KLC1 and an amyloid precursor protein (APP)-binding protein PAT1 (protein interacting with APP tail 1). The yeast two-hybrid assay demonstrated that the TPR domain-containing region of KLC1 mediated binding to the C-terminal tail region of PAT1. PAT1 also bound to KLC2 but not to kinesin heavy chains (KIF5A, KIF5B, and KIF5C) in the yeast two-hybrid assay. These protein-protein interactions were also observed in the glutathione S-transferase (GST) pull-down assay and by co-immunoprecipitation. Anti-PAT1 antibody as well as anti-APP anti-body co-immunoprecipitated KLC and KHCs associated with PAT1 from mouse brain extracts. These results suggest that PAT1 could mediate interactions between Kinesin-I and APP containing vesicles.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.255-267
• /
• 2009

PDP용 형광체는 소성 후 입자간 결합부족으로 인한 탈락현상 및 셀 결함 불량과 Red, Green, Blue 간 유전율 불일치로 인한 방전불량 현상 등의 문제점을 안고 있다. PDP용 형광체의 소성 후 입자간의 결합력을 증진시키기 위하여 frit을 조제로 첨가하였고, 이에 따른 기계적, 전기적, 광학적 특성의 변화를 조사하였다. 사용된 frit은 자체 소결시 무색의 투명하고 ZnO-$B_2O_3-SiO_2-Al_2O_3$계 비정질 세라믹 재료이며, 연화점은 $499.78^{\circ}C$이다. 형광체 중량의 3${\sim}$20wt% 범위에서 frit의 첨가량 변화에 따른 영향을 조사하였다. Frit의 첨가량이 증가할수록 경도가 증진 되었고, 5wt% 미만 함유될 경우 Red, Green, Blue 형광체 모두 유전율 조절 효과가 미약하였다. Red 형광체는 frit함량이 3wt% 이상 함유되면 휘도가 90% 미만으로 감소하였고, Green과 Blue는 frit 함량이 10wt%이상 함유되면 확연하게 휘도가 감소 하였다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.282-282
• /
• 1994

Radioligand결합실험에 의하여 7가지 이상의 5-hydroxytryptamine serotonin, 5-HT)수용체 subtype가 규명되어 있고, 1983년 5-HT agonist로 알려져 있던 8-hydroxy-2-(di-n-propylamino) tetralin (8-OH-DPAT)가 〔$^3$H〕5-HT수용체에 대한 결합만을 선택적으로 억제하며, 본 수용체를 직접 표식함이 알려진 이래, 본 수용체의 기능에 대한 연구가 계속되어 오고있다. 특히 항불안약으로 임상에 사용되어 왔던 benzodiazepines이 5-HT neuron의 활성을 억제한다는 사실이 보고되면서 5-HT neuron과 불안과의 관련에 관한 연구가 계속되고 있는 가운데, 새로운 항불안약으로 주목을 받고 있던 buspirone이 5-$HT_{1A}$ 수용체에 높은 친화성을 가짐이 확인되었다. 그 외에도 5-$HT_{1A}$ 수용체작용약이 항우울약, 항고혈압약으로서의 응용가능성 이 시사되면서 본 수용체작용약의 개발 및 그 기능해명이 주목을 받고 있다. 본 연구에서는, 5-$HT_{1A}$ 수용체작용약인 8-OH-DPAT와 항불안약을 개발할 목적으로 합성된 화합물인 1-[3-(3,4-methylenedioxyphenoxy)propy〕-4-phenyl piperazine (8P-554)을 이용하여, 화합물의 5-HT$_{1A}$수용체에 대한 친화성을 검토하는 방법과. 본 수용체를 통하여 나타난다고 알려져 있는 5-HT의 약리작용을 검토하는 방법을 기술하므로서, 여러가지 임상적 응용을 위하여 새롭게 합성되는 화합물의 5-$HT_{1A}$ 수용체와의 상호작용을 검색하는 방법을 제시하고자 한다.다.